Remote control of 2 Software Design Radio. Receiver and transmitter. Based on Adalm-Pluto SDR or RTL-SDR or Hack RF SDR or SDRplay and signal processing using GNU Radio on Raspberry PI. GUI on a web browser.
Remote SDR v5.08 image for Orange Pi One Plusto be installed on a 16 GB micro SD (minimum size). Version adapted to Adalm-Pluto, RTL-SDR , Hack RF One SDR, RSP1, RSP1A or SA818.
New features are proposed in the version 5 as:
SDR Play (RSP1, RSP1A) Receiver sharing between different users Option to select a simplified GUI (graphic User Interface) to reduce internet browser workload if needed If you have already installed Remote SDR in version 4.5 or before, this version 5 is completely new. Apache web server has been replaced by Node JS. GNU-RADIO 3.8 replaced by version 3.9.
Details on http://f1atb.fr/
Unzip the .7z file Install the image on the SD card using Win32 Disk Imager for example. Fit the card on the Orange Pi One Plus and switch it on. Find using a network analyser the IP address attributed to Orange Pi One Plus.
If you want to customize the installation, you can connect in SSH For the Orange Pi: user: root password: remsdr For the Raspberry Pi: user: pi password: remsdr You can also connect in Graphics using VNC on port 5901 for the Orange Pi. Default port for the Raspberry Pi. Password remsdr. Use this Graphics access to set your wifi parameters if needed.
In case of any blocking situation, due to a previous installation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Note that this release has been shrinked to reduce the size. At first start, it will resize to the max size of the SD card on boot.
Remote SDR v5.06 image for Orange Pi One Plusto be installed on a 32 GB micro SD (minimum size). Version adapted to Adalm-Pluto, RTL-SDR , Hack RF One SDR, RSP1, RSP1A or SA818.
New features are proposed in the version 5 as:
SDR Play (RSP1, RSP1A) Receiver sharing between different users Option to select a simplified GUI (graphic User Interface) to reduce internet browser workload if needed If you have already installed Remote SDR in version 4.5 or before, this version 5 is completely new. Apache web server has been replaced by Node JS. GNU-RADIO 3.8 replaced by version 3.9.
Details on http://f1atb.fr/
Unzip the .7z file Install the image on the SD card using Win32 Disk Imager for example. Fit the card on the Orange Pi One Plus and switch it on. Find using a network analyser the IP address attributed to Orange Pi One Plus.
If you want to customize the installation, you can connect in SSH For the Orange Pi: user: root password: remsdr For the Raspberry Pi: user: pi password: remsdr You can also connect in Graphics using VNC on port 5901 for the Orange Pi. Default port for the Raspberry Pi. Password remsdr. Use this Graphics access to set your wifi parameters if needed.
In case of any blocking situation, due to a previous installation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Note that this release has been shrinked to reduce the size. At first start, it will resize to the max size of the SD card on boot.
Remote SDR v5.04 image for Orange Pi One Plusto be installed on a 16 GB micro SD (minimum size). Version adapted to Adalm-Pluto, RTL-SDR , Hack RF One SDR, RSP1, RSP1A or SA818.
New features are proposed in the version 5 as:
SDR Play (RSP1, RSP1A) Receiver sharing between different users Option to select a simplified GUI (graphic User Interface) to reduce internet browser workload if needed If you have already installed Remote SDR in version 4.5 or before, this version 5 is completely new. Apache web server has been replaced by Node JS. GNU-RADIO 3.8 replaced by version 3.9.
Details on http://f1atb.fr/
Unzip the .7z file Install the image on the SD card using Win32 Disk Imager for example. Fit the card on the Orange Pi One Plus and switch it on. Find using a network analyser the IP address attributed to Orange Pi One Plus.
If you want to customize the installation, you can connect in SSH For the Orange Pi: user: root password: remsdr For the Raspberry Pi: user: pi password: remsdr You can also connect in Graphics using VNC on port 5901 for the Orange Pi. Default port for the Raspberry Pi. Password remsdr. Use this Graphics access to set your wifi parameters if needed.
In case of any blocking situation, due to a previous installation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Note that this release has been shrinked to reduce the size. At first start, it will resize to the max size of the SD card on boot.
Release of Remote-SDR v5.02 to remotely control an SDR receiver and an SDR transmitter from a web browser. It is the complete source code. Pre-configured for HAM Radio HF/VHF/UHF bands and QO-100 Es'Hail 2 satellite transponder. Can be used for any NBFM, SSB or CW Radio transmitter from 1MHz up to 6 GHz. The receiver modes are NBFM, WBFM, SSB, CW, AM. It works in Full-Duplex with Adalm-Pluto SDR, RTL-SDR , Hack RF One SDR,SDR Play RSP1, RSP1A or SA818. RTTY Decoder and Encoder is also provided. External output/input are available to connect via a virtual audio cable, any other application.
This version 5.02 runs on :
Raspberry Pi 4B with 2GB or more memory Orange Pi Zero 2
New features are proposed in the version 5 as:
SDR Play (RSP1, RSP1A) Receiver sharing between different users Option to select a simplified GUI (graphic User Interface) to reduce internet browser workload if needed If you have already installed Remote SDR in version 4.5 or before, this version 5 is completely new. Apache web server has been replaced by Node JS. GNU-RADIO 3.8 replaced by version 3.9. You cannot update from 4.5 to 5.02. This source code is needed if you do a manual installation. As it is a long and complicated process, I recommend using an image for Raspberry Pi 4B or Orange Pi Zero 2. The source has to be installed in /remsdr directory in addition to the existing files and directories created during the manual installation. To simplify the access to the different files, make : chmod 777 -R /remsdr
In case of any blocking situation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Details on https://f1atb.fr/
Remote SDR v5.0 image forOrange Pi Zero 2 to be installed on a 16 GB micro SD (minimum size). Version adapted to Adalm-Pluto, RTL-SDR , Hack RF One SDR, RSP1, RSP1A or SA818.
New features are proposed in the version 5 as:
SDR Play (RSP1, RSP1A) Receiver sharing between different users
If you have already installed Remote SDR in version 4.5 or before, this version 5 is completely new. Apache web server has been replaced by Node JS. GNU-RADIO 3.8 replaced by version 3.9.
Details on http://f1atb.fr/
Unzip the .7z file Install the image on the SD card using Win32 Disk Imager for example. Fit the card on the Raspberry and switch it on. Find using a network analyser the IP address attributed to Raspberry Pi
If you want to customize the installation, you can connect in SSH For the Orange Pi: user: root password: remsdr For the Raspberry Pi: user: pi password: remsdr You can also connect in Graphics using VNC on port 5901 for the Orange Pi. Default port for the Raspberry Pi. Password remsdr. Use this Graphics access to set your wifi parameters if needed.
In case of any blocking situation, due to a previous installation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Note that this release has been shrinked to reduce the size. At first start, it will resize to the max size of the SD card on boot.
Remote SDR v5.0 image for Raspberry Pi 4B (2GB minimum) to be installed on a 16 GB micro SD (minimum size). Version adapted to Adalm-Pluto, RTL-SDR , Hack RF One SDR, RSP1, RSP1A or SA818.
New features are proposed in the version 5 as:
SDR Play (RSP1, RSP1A) Receiver sharing between different users Option to select a simplified GUI (graphic User Interface) to reduce internet browser workload if needed If you have already installed Remote SDR in version 4.5 or before, this version 5 is completely new. Apache web server has been replaced by Node JS. GNU-RADIO 3.8 replaced by version 3.9.
Details on http://f1atb.fr/
Unzip the .7z file Install the image on the SD card using Win32 Disk Imager for example. Fit the card on the Raspberry and switch it on. Find using a network analyser the IP address attributed to Raspberry Pi
If you want to customize the installation, you can connect in SSH For the Orange Pi: user: root password: remsdr For the Raspberry Pi: user: pi password: remsdr You can also connect in Graphics using VNC on port 5901 for the Orange Pi. Default port for the Raspberry Pi. Password remsdr. Use this Graphics access to set your wifi parameters if needed.
In case of any blocking situation, due to a previous installation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Note that this release has been shrinked to reduce the size. At first start, it will resize to the max size of the SD card on boot.
Remote SDR v4.5 image for Orane Pi Zero 2 to be installed on a 16 GB micro SD (minimum size). Version adapted to Adalm-Pluto, RTL-SDR , Hack RF One SDR and SA818.
New features are proposed in the version 4.5 as:
RTL-SDR V3 frequency coverage below 28MHz RTTY decoder and encoder Option to select a simplified GUI (graphic User Interface) to reduce internet browser workload if needed If you have already installed Remote SDR and you have customized the configurationRX.js or configurationTX.js files, copy them somewhere, to be able to customize this new version.
If you have already installed the version 4.0, you can just download the source code and replace the /var/www/html directory and reboot the processor instead of installing a new image.
Details on http://f1atb.fr/
Unzip the .7z file Install the image on the SD card using Win32 Disk Imager for example. Fit the card on the Orange Pi and switch it on. Find using a network analyser the IP address attributed to Orange Pi
You access Remote SDR with a web browser at the address http://ip_orange_pi . Don't forget to set the flag on Chrome or Edge as explained here: https://f1atb.fr/index.php/2022/01/06/microphone-and-signal-processing-authorization/ Since version 4.2 it is also necessary for the receiver audio channel.
If you want to customize the installation, you can connect in SSH For the Orange Pi: user: root password: remsdr For the Raspberry Pi: user: pi password: remsdr You can also connect in Graphics using VNC on port 5901 for the Orange Pi. Default port for the Raspberry Pi. Password remsdr. Use this Graphics access to set your wifi parameters if needed.
In case of any blocking situation, due to a previous installation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Note that this release has been shrinked to reduce the size. At first start, it will resize to the max size of the SD card on boot.
Remote SDR v4.5 image for Raspberry Pi 4B (2GB minimum) to be installed on a 16 GB micro SD (minimum size). Version adapted to Adalm-Pluto, RTL-SDR , Hack RF One SDR and SA818.
New features are proposed in the version 4.5 as:
If you have already installed Remote SDR and you have customized the configurationRX.js or configurationTX.js files, copy them somewhere, to be able to customize this new version.
If you have already installed the version 4.0, you can just download the source code and replace the /var/www/html directory and reboot the processor instead of installing a new image.
Details on http://f1atb.fr/
Unzip the .7z file Install the image on the SD card using Win32 Disk Imager for example. Fit the card on the Raspberry and switch it on. Find using a network analyser the IP address attributed to Raspberry Pi
You access Remote SDR with a web browser at the address http://ip_raspberry_pi . Don't forget to set the flag on Chrome or Edge as explained here: https://f1atb.fr/index.php/2022/01/06/microphone-and-signal-processing-authorization/ Since version 4.2 it is also necessary for the receiver audio channel.
If you want to customize the installation, you can connect in SSH For the Orange Pi: user: root password: remsdr For the Raspberry Pi: user: pi password: remsdr You can also connect in Graphics using VNC on port 5901 for the Orange Pi. Default port for the Raspberry Pi. Password remsdr. Use this Graphics access to set your wifi parameters if needed.
In case of any blocking situation, due to a previous installation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Note that this release has been shrinked to reduce the size. At first start, it will resize to the max size of the SD card on boot.
Release of Remote-SDR v4.5 to remotely control an SDR receiver and an SDR transmitter from a web browser. It is the complete source code. Pre-configured for HAM Radio HF/VHF/UHF bands and QO-100 Es'Hail 2 satellite transponder. Can be used for any NBFM, SSB or CW Radio transmitter from 1MHz up to 6 GHz. The receiver modes are NBFM, WBFM, SSB, CW, AM. It works in Full-Duplex with Adalm-Pluto SDR, RTL-SDR , Hack RF One SDR or SA818. RTTY Decoder and Encoder is also provided. External output/input are available to connect via a virtual audio cable, any other application.
This version 4.5 runs on :
Raspberry Pi 4B with 2GB or more memory Orange Pi Zero 2 Orange Pi One Plus
This new version 4.5 introduces:
In case of any blocking situation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Details on https://f1atb.fr/
Remote SDR v4.4 image for Orange Pi Zero 2 to be installed on a 16 GB micro SD (minimum size). Version adapted to Adalm-Pluto, RTL-SDR , Hack RF One SDR and SA818.
New features are proposed in the version 4.4 as:
IP ports selection to use Remote SDR via a NAT (Network Address Translation) Update to control Remote SDR from MMSSTV serial link interface. Adaptive RX audio buffer size according to the quality of the Internet link. Waterfall on RX audio spectrum If you have already installed Remote SDR and you have customized the configurationRX.js or configurationTX.js files, copy them somewhere, to be able to customize this new version.
If you have already installed the version 4.0, you can just download the source code and replace the /var/www/html directory and reboot the processor instead of installing a new image.
Details on http://f1atb.fr/
Unzip the .7z file Install the image on the SD card using Win32 Disk Imager for example. Fit the card on the Raspberry and switch it on. Find using a network analyser the IP address attributed to Raspberry Pi
You access Remote SDR with a web browser at the address http://ip_raspberry_pi . Don't forget to set the flag on Chrome or Edge as explained here: https://f1atb.fr/index.php/2022/01/06/microphone-and-signal-processing-authorization/ Since version 4.2 it is also necessary for the receiver audio channel.
If you want to customize the installation, you can connect in SSH For the Orange Pi: user: root password: remsdr For the Raspberry Pi: user: pi password: remsdr You can also connect in Graphics using VNC on port 5901 for the Orange Pi. Default port for the Raspberry Pi. Password remsdr. Use this Graphics access to set your wifi parameters if needed.
In case of any blocking situation, due to a previous installation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Note that this release has been shrinked to reduce the size. At first start, it will resize to the max size of the SD card on boot.