Remote control of 2 Software Design Radio. Receiver and transmitter. Based on Adalm-Pluto SDR or RTL-SDR or Hack RF SDR or SDRplay and signal processing using GNU Radio on Raspberry PI. GUI on a web browser.
Remote SDR v4.4 image for Raspberry Pi 4B (2GB minimum) to be installed on a 16 GB micro SD (minimum size). Version adapted to Adalm-Pluto, RTL-SDR , Hack RF One SDR and SA818.
New features are proposed in the version 4.4 as:
If you have already installed Remote SDR and you have customized the configurationRX.js or configurationTX.js files, copy them somewhere, to be able to customize this new version.
If you have already installed the version 4.0, you can just download the source code and replace the /var/www/html directory and reboot the processor instead of installing a new image.
Details on http://f1atb.fr
Unzip the .7z file Install the image on the SD card using Win32 Disk Imager for example. Fit the card on the Raspberry and switch it on. Find using a network analyser the IP address attributed to Raspberry Pi
You access Remote SDR with a web browser at the address http://ip_raspberry_pi . Don't forget to set the flag on Chrome or Edge as explained here: https://f1atb.fr/index.php/2022/01/06/microphone-and-signal-processing-authorization/ Since version 4.2 it is also necessary for the receiver audio channel.
If you want to customize the installation, you can connect in SSH For the Orange Pi: user: root password: remsdr For the Raspberry Pi: user: pi password: remsdr You can also connect in Graphics using VNC on port 5901 for the Orange Pi. Default port for the Raspberry Pi. Password remsdr. Use this Graphics access to set your wifi parameters if needed.
In case of any blocking situation, due to a previous installation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Note that this release has been shrinked to reduce the size. At first start, it will resize to the max size of the SD card on boot.
Release of Remote-SDR v4.4 to remotely control an SDR receiver and an SDR transmitter from a web browser. It is the complete source code. Pre-configured for HAM Radio HF/VHF/UHF bands and QO-100 Es'Hail 2 satellite transponder. Can be used for any NBFM, SSB or CW Radio transmitter from 1MHz up to 6 GHz. The receiver modes are NBFM, WBFM, SSB, CW, AM. It works in Full-Duplex with Adalm-Pluto SDR, RTL-SDR , Hack RF One SDR or SA818.
This version 4.4 runs on :
Raspberry Pi 4B with 2GB or more memory Orange Pi Zero 2 Orange Pi One Plus
This new version 4.4 introduces:
Don't forget to set the flag on Chrome or Edge as explained here: https://f1atb.fr/index.php/2022/01/06/microphone-and-signal-processing-authorization/ Since version 4.2 it is also necessary for the receiver audio channel.
In case of any blocking situation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Details on https://f1atb.fr
Remote SDR v4.3 image for Orange Pi Zero 2 (1GB minimum) to be installed on a 16 GB micro SD (minimum size). Version adapted to Adalm-Pluto, RTL-SDR , Hack RF One SDR and SA818.
New features are proposed in the version 4.3 as:
Additional audio input / output to connect an external application – SSTV, WSJT (FT8)…
Control by Omnirig CAT
If you have already installed Remote SDR and you have customized the configurationRX.js or configurationTX.js files, copy them somewhere, to be able to customize this new version.
If you have already installed the version 4.0, you can just download the source code and replace the /var/www/html directory and reboot the processor instead of installing a new image.
Details on http://f1atb.fr
Unzip the .7z file Install the image on the SD card using Win32 Disk Imager for example. Fit the card on theOrange Pi and switch it on. Find using a network analyser the IP address attributed to Raspberry Pi
You access Remote SDR with a web browser at the address http://ip_raspberry_pi . Don't forget to set the flag on Chrome or Edge as explained here: https://f1atb.fr/index.php/2022/01/06/microphone-and-signal-processing-authorization/ Since version 4.2 it is also necessary for the receiver audio channel.
If you want to customize the installation, you can connect in SSH For the Orange Pi: user: root password: remsdr For the Raspberry Pi: user: pi password: remsdr You can also connect in Graphics using VNC on port 5901 for the Orange Pi. Default port for the Raspberry Pi. Password remsdr. Use this Graphics access to set your wifi parameters if needed.
In case of any blocking situation, due to a previous installation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Note that this release has been shrinked to reduce the size. At first start, it will resize to the max size of the SD card on boot.
Remote SDR v4.3 image for Raspberry Pi 4B (2GB minimum) to be installed on a 16 GB micro SD (minimum size). Version adapted to Adalm-Pluto, RTL-SDR , Hack RF One SDR and SA818.
New features are proposed in the version 4.3 as:
If you have already installed Remote SDR and you have customized the configurationRX.js or configurationTX.js files, copy them somewhere, to be able to customize this new version.
If you have already installed the version 4.0, you can just download the source code and replace the /var/www/html directory and reboot the processor instead of installing a new image.
Details on http://f1atb.fr
Unzip the .7z file Install the image on the SD card using Win32 Disk Imager for example. Fit the card on the Raspberry and switch it on. Find using a network analyser the IP address attributed to Raspberry Pi
You access Remote SDR with a web browser at the address http://ip_raspberry_pi . Don't forget to set the flag on Chrome or Edge as explained here: https://f1atb.fr/index.php/2022/01/06/microphone-and-signal-processing-authorization/ Since version 4.2 it is also necessary for the receiver audio channel.
If you want to customize the installation, you can connect in SSH For the Orange Pi: user: root password: remsdr For the Raspberry Pi: user: pi password: remsdr You can also connect in Graphics using VNC on port 5901 for the Orange Pi. Default port for the Raspberry Pi. Password remsdr. Use this Graphics access to set your wifi parameters if needed.
In case of any blocking situation, due to a previous installation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Note that this release has been shrinked to reduce the size. At first start, it will resize to the max size of the SD card on boot.
Release of Remote-SDR v4.3 to remotely control an SDR receiver and an SDR transmitter from a web browser. It is the complete source code. Pre-configured for HAM Radio HF/VHF/UHF bands and QO-100 Es'Hail 2 satellite transponder. Can be used for any NBFM, SSB or CW Radio transmitter from 1MHz up to 6 GHz. The receiver modes are NBFM, WBFM, SSB, CW, AM. It works in Full-Duplex with Adalm-Pluto SDR, RTL-SDR , Hack RF One SDR or SA818.
This version 4.3 runs on :
Raspberry Pi 4B with 2GB or more memory Orange Pi Zero 2 Orange Pi One Plus This new version 4.3 introduces:
If you have already installed the version 4.0, you can just replace the /var/www/html directory and reboot the processor.
Don't forget to set the flag on Chrome or Edge as explained here: https://f1atb.fr/index.php/2022/01/06/microphone-and-signal-processing-authorization/ Since version 4.2 it is also necessary for the receiver audio channel.
In case of any blocking situation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Details on https://f1atb.fr
Remote SDR v4.2 image for Orange Pi Zero 2 (1GB minimum) to be installed on a 16 GB micro SD (minimum size). Version adapted to Adalm-Pluto, RTL-SDR , Hack RF One SDR and SA818.
New features are proposed in the version 4.2 as:
audio equalizers and noise filters on RX and TX channels. direct RX audio without filtering to connect digital modulation decoder spatial filter to normalize the noise on spectrum and waterfall band background and curves colour selection plugin for GS-232 Rotator control remotely If you have already installed Remote SDR and you have customized the configurationRX.js or configurationTX.js files, copy them somewhere, to be able to customize this new version.
Details on http://f1atb.fr
Unzip the .7z file Install the image on the SD card using Win32 Disk Imager for example. Fit the card on the Orange Pi and switch it on. Find using a network analyser the IP address attributed to Raspberry Pi
You access Remote SDR with a web browser at the address http://ip_orange_pi . Don't forget to set the flag on Chrome or Edge as explained here: https://f1atb.fr/index.php/2021/10/22/remote-sdr-raspberry-pi-4b-or-orange-pi-zero-2-image-installation/. Since version 4.2 it is also necessary for the receiver audio channel.
If you want to customize the installation, you can connect in SSH For the Orange Pi: user: root password: remsdr For the Raspberry Pi: user: pi password: remsdr You can also connect in Graphics using VNC on port 5901 for the Orange Pi. Default port for the Raspberry Pi. Password remsdr. Use this Graphics access to set your wifi parameters if needed.
In case of any blocking situation, due to a previous installation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Note that this release has been shrinked to reduce the size. At first start, it will resize to the max size of the SD card on boot.
Remote SDR v4.2 image for Orange Pi One Plus (1GB minimum) to be installed on a 16 GB micro SD (minimum size). Version adapted to Adalm-Pluto, RTL-SDR , Hack RF One SDR and SA818.
New features are proposed in the version 4.2 as:
If you have already installed Remote SDR and you have customized the configurationRX.js or configurationTX.js files, copy them somewhere, to be able to customize this new version.
Details on http://f1atb.fr
Unzip the .7z file Install the image on the SD card using Win32 Disk Imager for example. Fit the card on the Orange Pi and switch it on. Find using a network analyser the IP address attributed to Raspberry Pi
You access Remote SDR with a web browser at the address http://ip_orange_pi . Don't forget to set the flag on Chrome or Edge as explained here: https://f1atb.fr/index.php/2021/10/22/remote-sdr-raspberry-pi-4b-or-orange-pi-zero-2-image-installation/ Since version 4.2 it is also necessary for the receiver audio channel.
If you want to customize the installation, you can connect in SSH For the Orange Pi: user: root password: remsdr For the Raspberry Pi: user: pi password: remsdr You can also connect in Graphics using VNC on port 5901 for the Orange Pi. Default port for the Raspberry Pi. Password remsdr. Use this Graphics access to set your wifi parameters if needed.
In case of any blocking situation, due to a previous installation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Note that this release has been shrinked to reduce the size. At first start, it will resize to the max size of the SD card on boot.
Remote SDR v4.2 image for Raspberry Pi 4B (2GB minimum) to be installed on a 16 GB micro SD (minimum size). Version adapted to Adalm-Pluto, RTL-SDR , Hack RF One SDR and SA818.
New features are proposed in the version 4.2 as:
If you have already installed Remote SDR and you have customized the configurationRX.js or configurationTX.js files, copy them somewhere, to be able to customize this new version.
Details on http://f1atb.fr
Unzip the .7z file Install the image on the SD card using Win32 Disk Imager for example. Fit the card on the Raspberry and switch it on. Find using a network analyser the IP address attributed to Raspberry Pi
You access Remote SDR with a web browser at the address http://ip_raspberry_pi . Don't forget to set the flag on Chrome or Edge as explained here: https://f1atb.fr/index.php/2021/10/22/remote-sdr-raspberry-pi-4b-or-orange-pi-zero-2-image-installation/ Since version 4.2 it is also necessary for the receiver audio channel.
If you want to customize the installation, you can connect in SSH For the Orange Pi: user: root password: remsdr For the Raspberry Pi: user: pi password: remsdr You can also connect in Graphics using VNC on port 5901 for the Orange Pi. Default port for the Raspberry Pi. Password remsdr. Use this Graphics access to set your wifi parameters if needed.
In case of any blocking situation, due to a previous installation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Note that this release has been shrinked to reduce the size. At first start, it will resize to the max size of the SD card on boot.
Release of Remote-SDR v4.2 to remotely control an SDR receiver and an SDR transmitter from a web browser. It is the complete source code. Pre-configured for HAM Radio HF/VHF/UHF bands and QO-100 Es'Hail 2 satellite transponder. Can be used for any NBFM, SSB or CW Radio transmitter from 1MHz up to 6 GHz. The receiver modes are NBFM, WBFM, SSB, CW, AM. It works in Full-Duplex with Adalm-Pluto SDR, RTL-SDR , Hack RF One SDR or SA818.
This version 4.2 runs on :
This new version 4.2 introduces:
If you have already installed Remote SDR and you have customized the configurationRX.js or configurationTX.js files, copy them somewhere to be able to customize the new version.
If you have already installed the version 4.0, you can just replace the /var/www/html directory and reboot the processor.
Don't forget to set the flag on Chrome or Edge as explained here: https://f1atb.fr/index.php/2021/10/22/remote-sdr-raspberry-pi-4b-or-orange-pi-zero-2-image-installation/ Since version 4.2 it is also necessary for the receiver audio channel.
In case of any blocking situation, go on the Tools page and select the "Reset Local Storage in browser". It will clean the history and restart on a clean configuration.
Details on https://f1atb.fr
Remote SDR v4.1 image for Orange Pi Zero 2 (1GB minimum) to be installed on a 16 GB micro SD (minimum size). Version adapted to Adalm-Pluto, RTL-SDR , Hack RF One SDR and SA818.
New features are proposed in the version 4.1 as:
CW modulation Automatic CW Keys (Iambic A and Iambic B) Turning Knob interface to control the receiving frequency
If you have already installed Remote SDR and you have customized the configurationRX.js or configurationTX.js files, copy them somewhere, to be able to customize this new version.
Details on http://f1atb.fr
Unzip the .7z file Install the image on the SD card using Win32 Disk Imager for example. Fit the card on the Raspberry and switch it on. Find using a network analyser the IP address attributed to OrangePi / Raspberry Pi
You access Remote SDR with a web browser at the address http://ip_orange_pi . Don't forget to set the flag on Chrome or Edge as explained here: https://f1atb.fr/index.php/2021/10/22/remote-sdr-raspberry-pi-4b-or-orange-pi-zero-2-image-installation/
If you want to customize the installation, you can connect in SSH For the Orange Pi: user: root password: remsdr For the Raspberry Pi: user: pi password: remsdr You can also connect in Graphics using VNC on port 5901 for the Orange Pi. Default port for the Raspberry Pi. Password remsdr. Use this Graphics access to set your wifi parameters if needed.
Note that this release has been shrinked to reduce the size. At first start, it will resize to the max size of the SD card on boot.