NeuSomatic: Deep convolutional neural networks for accurate somatic mutation detection

NeuSomatic is based on deep convolutional neural networks for accurate somatic mutation detection. With properly trained models, it can robustly perform across sequencing platforms, strategies, and conditions. NeuSomatic summarizes and augments sequence alignments in a novel way and incorporates multi-dimensional features to capture variant signals effectively. It is not only a universal but also accurate somatic mutation detection method.

For more information contact us at [email protected]

Publication

If you use NeuSomatic in your work, please cite the following papers:

Sayed Mohammad Ebrahim Sahraeian, Ruolin Liu, Bayo Lau, Karl Podesta, Marghoob Mohiyuddin, Hugo Y. K. Lam,
Deep convolutional neural networks for accurate somatic mutation detection. Nature Communications 10: 1041, (2019).
doi: https://doi.org/10.1038/s41467-019-09027-x

Sayed Mohammad Ebrahim Sahraeian, Li Tai Fang, Marghoob Mohiyuddin, Huixiao Hong, Wenming Xiao,
Robust cancer mutation detection with deep learning models derived from tumor-normal sequencing data. bioRxiv (2019): 667261.
doi: https://doi.org/10.1101/667261

Example Input Matrix

Table of Contents

Availability
NeuSomatic Docker Image
Required Inputs
Quick Test
Example Usage
Ensemble mode
Creating Training Data
Trained Network Models
HPC run
License

Availability

NeuSomatic is written in Python and C++ and requires a Unix-like environment to run. It has been sucessfully tested on CentOS 7. Its deep learning framework is implemented using PyTorch 1.1.0 to enable GPU acceleration for training/testing.

NeuSomatic first scans the genome to identify candidate variants and extract alignment information. The binary for this step can be obtained at neusomatic/bin folder by running ./build.sh (which requires cmake 3.13.2 and g++ 5.4.0).

Python 3.7 and the following Python packages must be installed:

• pytorch 1.1.0
• torchvision 0.3.0
• pybedtools 0.8.0
• pysam 0.15.2
• zlib 1.2.11
• numpy 1.15.4
• scipy 1.2.0
• imageio 2.5.0
• biopython 1.73

It also depends on the following packages:

• cudatoolkit 9.0 (if you want to use GPU)
• tabix 0.2.6
• bedtools 2.27.1
• samtools 1.9

You can install these packages using anaconda/miniconda :

conda install zlib=1.2.11 numpy=1.15.4 scipy=1.2.0 cmake=3.13.2 imageio=2.5.0
conda install pysam=0.15.2 pybedtools=0.8.0 samtools=1.9 tabix=0.2.6 bedtools=2.27.1 biopython=1.73 -c bioconda
conda install pytorch=1.1.0 torchvision=0.3.0 cudatoolkit=9.0 -c pytorch

Then you can export the conda paths as:

export PATH="/PATH/TO/CONDA/bin:$PATH"
export LD_LIBRARY_PATH="/PATH/TO/CONDA/lib:$LD_LIBRARY_PATH"

g++ 5.4.0 can also be obained as sudo apt-get install gcc-5 g++-5.

NeuSomatic Docker Image

The docker image with all the packages installed (CPU-only) can be found at https://hub.docker.com/r/msahraeian/neusomatic/

To use GPU (in train.py and call.py steps), you should use conda environment to locally install required packages as shown above.

The dockerfile is also available at docker/Dockerfile for local build.

Examples on how to use the docker image are shown at test/docker_test.sh.

Required Inputs

For training mode, the following inputs are required:

• tumor .bam alignment file
• normal .bam alignment file
• training region .bed file
• truth somatic variant .vcf file

For calling mode, the following inputs are required:

• tumor .bam alignment file
• normal .bam alignment file
• call region .bed file
• trained model .pth file

For the region .bed files, if you don't have any preferred target regions for training/calling, you can use the whole genome as the target region. Example bed files of major chromosomes for human hg38, hg19, and b37 references can be found at resources.

Quick Test

Testing the preprocessing, calling, and postprocessing steps:

cd test
./run_test.sh

The outputs at test/example/work_standalone/NeuSomatic_standalone.vcf and test/example/work_ensemble/NeuSomatic_ensemble.vcf for stand-alone and ensemble modes should look like test/NeuSomatic_standalone.vcf and test/NeuSomatic_ensemble.vcf, respectively.

Similarly, you can test docker image as:

cd test
./docker_test.sh

Example Usage

For training:

1. Preprocess step in train mode (scan the alignments, find candidates, generate input matrix dataset)

python preprocess.py \
	--mode train \
	--reference GRCh38.fa \
	--region_bed region.bed \
	--tumor_bam tumor.bam \
	--normal_bam normal.bam \
	--work work_train \
	--truth_vcf truth.vcf \
	--min_mapq 10 \
	--number_threads 10 \
	--scan_alignments_binary ../bin/scan_alignments

2. Train network

python train.py \
	--candidates_tsv work_train/dataset/*/candidates*.tsv \
	--out work_train \
	--num_threads 10 \
	--batch_size 100 

If you want to continue training starting from a pretrained model you can use --checkpoint.

For testing:

1. Preprocess step in call mode (scan the alignments, find candidates, generate input matrix dataset)

python preprocess.py \
	--mode call \
	--reference GRCh38.fa \
	--region_bed region.bed \
	--tumor_bam tumor.bam \
	--normal_bam normal.bam \
	--work work_call \
	--min_mapq 10 \
	--number_threads 10 \
	--scan_alignments_binary ../bin/scan_alignments

2. Call variants

python call.py \
	--candidates_tsv work_call/dataset/*/candidates*.tsv \
	--reference GRCh38.fa \
	--out work_call \
	--checkpoint work_train/some_checkpoint.pth \
	--num_threads 10 \
	--batch_size 100 

3. Postprocess step (resolve long INDEL sequences, report vcf)

python postprocess.py \
	--reference GRCh38.fa \
	--tumor_bam tumor.bam \
	--pred_vcf work_call/pred.vcf \
	--candidates_vcf work_call/work_tumor/filtered_candidates.vcf \
	--output_vcf work_call/NeuSomatic.vcf \
	--work work_call 

Here, the final NeuSomatic prediction is reported at work_call/NeuSomatic.vcf.

NeuSomatic will use GPUs in train/call steps if they are avilable. To use specific GPUs for train/call steps, you can set the environment variable CUDA_VISIBLE_DEVICES as:

CUDA_VISIBLE_DEVICES=0,1,2,3 python train.py ...

or

CUDA_VISIBLE_DEVICES=0,1,2,3 python call.py ...

To run in CPU mode you can disable accessing to GPU by exporting CUDA_VISIBLE_DEVICES=.

Ensemble mode

NeuSomatic can be used universally as a stand-alone somatic mutation detection method or with an ensemble of existing methods. NeuSomatic currently supports outputs from MuTect2, MuSE, Strelka2, SomaticSniper, VarDict, and VarScan2. For ensemble mode, the ensembled outputs of different somatic callers (as a single .tsv file) should be prepared and inputed using --ensemble_tsv argument in preprocess.py and postprocess.py .

There are two alternative ways to prepare this file:

1. Dockerized solution for running all of the individual somatic callers (MuTect2, MuSE, Strelka2, SomaticSniper, VarDict, and VarScan2), and a wrapper that combines their output is explained at ensemble_docker_pipelines.

2. Alternartively, if you don't want to use docker and already have the output of all somatic callers, you can prepare the .tsv file using the SomaticSeq.Wrapper.sh script here (you may need to install the necessary dependencies for this script, explained here).

   For instance:

   SomaticSeq.Wrapper.sh \
   --output-dir output \
   --genome-reference GRCh38.fa \
   --tumor-bam tumor.bam \
   --normal-bam normal.bam \
    -mutect2 MuTect2.vcf \
   --varscan-snv VarScan2.snp.vcf \
   --varscan-indel VarScan2.indel.vcf \
    -sniper SomaticSniper.vcf \
   --vardict VarDict.vcf \
   --muse MuSE.vcf \
   --strelka-snv somatic.snvs.vcf.gz \
   --strelka-indel somatic.indels.vcf.gz \
   --inclusion-region region.bed \
    -dbsnp dbsnp.GRCh38.vcf \
    -gatk GenomeAnalysisTK.jar
   

   Then, in the output directory, do:

   cat <(cat Ensemble.s*.tsv |grep CHROM|head -1) \
       <(cat Ensemble.s*.tsv |grep -v CHROM) | sed "s/nan/0/g" > ensemble_ann.tsv
   

   and provide ensemble_ann.tsv as --ensemble_tsv argument in preprocess.py and postprocess.py.

NOTE:

• To train or call in the ensemble mode you should use --ensemble argument in train.py and call.py.

Creating Training Data

The best performance can be obtained when the network is trained on your input dataset. You can creat training data for your input data using BAMSurgeon that can spike in in silico somatic mutations into existing BAM files. The dockerized piplines and complete documentation on how to creat training sets can be found here.

You can then used the synthetic tumor/normal pair and the known in silico spiked mutations (as truth set) to train the NeuSomatic network as shown in Example Usage.

Trained Network Models

We provide a set of trained NeuSomatic network models for general purpose usage. Users should note that these models are trained for sepcific settings and are not supposed to work perfectly for all circumestances.

The SEQC-II pretrained models are the recommended NeuSomatic models and are analyzed in detail in Sahraeian et al. 2019.

The following models can be found at neusomatic/models folder:

Latest models

Model	Mode	Training Information
NeuSomatic_v0.1.4_standalone_SEQC-WGS-Spike.pth	Stand-alone	SEQC-II (SEQC-WGS-Spike model) (trained on 20 WGS replicate pairs with in silico somatic mutations of 1%-100% AF, matched with both 95%N and 100%N, Illumina HiSeq and NovaSeq, BWA-MEM, ~40x-220x)
NeuSomatic_v0.1.4_ensemble_SEQC-WGS-Spike.pth	Ensemble	SEQC-II (SEQC-WGS-Spike model) (trained on 20 WGS replicate pairs with in silico somatic mutations of 1%-100% AF, matched with both 95%N and 100%N, Illumina HiSeq and NovaSeq, BWA-MEM, ~40x-220x, 5 callers used: MuTect2, Strelka2, MuSE, SomaticSniper, VarDict)
NeuSomatic_v0.1.4_standalone_SEQC-WGS-GT50-SpikeWGS10.pth	Stand-alone	SEQC-II (SEQC-WGS-GT50-SpikeWGS10 model) (trained on combination of two datasets: (1) 50% of the genome for 24 real tumor-normal SEQC-II replicates using the HighConf truth set annotation, with multiple purity settings of 100T-100N/10T-100N/10T-95N, 1%-100% AF and (2) 10% of data used in NeuSomatic_v0.1.4_standalone_SEQC-WGS-Spike.pth model. Illumina HiSeq and NovaSeq, BWA-MEM, ~40x-390x)
NeuSomatic_v0.1.4_ensemble_SEQC-WGS-GT50-SpikeWGS10.pth	Ensemble	SEQC-II (SEQC-WGS-GT50-SpikeWGS10 model) (trained on combination of two datasets: (1) 50% of the genome for 24 real tumor-normal SEQC-II replicates using the HighConf truth set annotation, with multiple purity settings of 100T-100N/10T-100N/10T-95N, 1%-100% AF and (2) 10% of data used in NeuSomatic_v0.1.4_ensemble_SEQC-WGS-Spike.pth model. Illumina HiSeq and NovaSeq, BWA-MEM, ~40x-390x, 5 callers used: MuTect2, Strelka2, MuSE, SomaticSniper, VarDict)

Older models

Model	Mode	Training Information
NeuSomatic_v0.1.3_standalone_Dream3.pth	Stand-alone	WGS Dream Challenge Stage 3 (trained on multiple purity settings: 100T-100N/50T-100N/70T-95N/50T-95N/25T-95N, Illumina, BWA-MEM, ~30x)
NeuSomatic_v0.1.3_ensemble_Dream3.pth	Ensemble	WGS Dream Challenge Stage 3 (trained on multiple purity settings: 100T-100N/50T-100N/70T-95N/50T-95N/25T-95N, Illumina, BWA-MEM, ~30x, 6 callers used: MuTect2, Strelka2, MuSE, SomaticSniper, VarDict, VarScan2)
NeuSomatic_v0.1.0_standalone_Dream3_70purity.pth	Stand-alone	WGS Dream Challenge Stage 3 (70% tumor and 95% normal purities, Illumina, BWA-MEM, ~30x)
NeuSomatic_v0.1.0_ensemble_Dream3_70purity.pth	Ensemble	WGS Dream Challenge Stage 3 (70% tumor and 95% normal purities, Illumina, BWA-MEM, ~30x, 6 callers used: MuTect2, Strelka2, MuSE, SomaticSniper, VarDict, VarScan2)
NeuSomatic_v0.1.0_standalone_WEX_100purity.pth	Stand-alone	WEX (100% tumor and normal purities, Illumina, BWA-MEM, ~125x)
NeuSomatic_v0.1.0_ensemble_WEX_100purity.pth	Ensemble	WEX (100% tumor and normal purities, Illumina, BWA-MEM, ~125x, 6 callers used: MuTect2, Strelka2, MuSE, SomaticSniper, VarDict, VarScan2)

HPC run

For distributed data processing on HPC platforms, the input regions can be splitted to smaller sub-regions as follows:

python split_bed.py \
	--region_bed region.bed \
	--output work \
	--num_splits 10

Then, each sub-region can be processed as follows (for instance on SGE cluster):

for i in {0..10}
do
	qsub -pe smp 24 \
	"python preprocess.py \
	--mode call [or --mode train]
	--reference GRCh38.fa --tumor_bam tumor.bam --normal_bam normal.bam \
	--region_bed work/splits/region_${i}.bed \
	--work work/work_${i} \
	--min_mapq 10 --number_threads 24 \
	--scan_alignments_binary ../bin/scan_alignments"
done

Then the candiate .tsv files to be used for train/call can be found at work_*/dataset/*/candidates*.tsv.

License

NeuSomatic is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.