中文

Audio Reactive LED Strip

Overview

This project realizes a realtime music visualization LED strip.

The only hardware needed is an ESP32 board, a microphone, and a controllable LED strip.

The programs running on ESP32 is compiled in Arduino IDE. Besides, ESPHome platform is also supported.

Hardware

You can find all supported LED Strip in FastLED Libary.

• How do they connect together?

  

  If you use an I2S microphone, you should modify the program(I2s is supported by ESP32-IDF)

• What's HaChina's Microphone Shield?

  • It contains a PDM Microphone, a Touch Button, post connectors(making connection to LED strip easily).
  • It can be plugged into NodeMCU-32S directly.
  • It can also act as a remote microphone for voice_assistant.

  

  Touch Button is connected to GPIO32

• Where can I buy HaChina's Microphone Shield?

  You can buy it on taobao.

  Or if you are not in mainland China, you can email your needs information to [email protected].

Arduino IDE

• Install ESP32 Board

  Add ESP32's package url in Additional Boards Manager URLs of the menu Preferences: https://dl.espressif.com/dl/package_esp32_index.json

  

  Open Boards manager... in menu Tools. Search ESP32, then install it.

  

• Install Fastled library in Arduino

  Search and install FastLED in menu Sketch/Include Library/Manage Libraries....

  

• Clone the project

  git clone https://github.com/zhujisheng/audio-reactive-led-strip

• Compile&Upload

  1. Open audio-reactive-led-strip.ino in Arduino

  2. Connect to ESP32 by the USB

  3. Select the correct Board and Port in the menu Tools

     

  4. Upload

  5. Modify N_PIXELS in fileaudio-reactive-led-strip.ino, if the number of LEDs on strip is not 60.

  6. Modify FastLED.addLeds<...>(...) in fileaudio-reactive-led-strip.ino, if LED strip has a clock pin(e.g. APA102).

Run on ESPHome Platform

• Copy Source Code to ESPHome's Config Directory

  git clone https://github.com/zhujisheng/audio-reactive-led-strip
  cp -r audio-reactive-led-strip/includes/ ~/esphome_config/
  cp audio-reactive-led-strip/music_leds_esphome.h ~/esphome_config/
  

  If you run on ESPHome Add-on, the ESPHome's config directory is /config/esphome/(/config/ is the HomeAssistant Core's config directory.)

• Config ESPHome Yaml

  1. Generate the basic configuration yaml in ESPHome by wizard.

  2. Add includes in domain esphome

     esphome:
       name: ......
       platform: ESP32
       board: ......
       includes:
         - music_leds_esphome.h
         - includes/FFT.h
         - includes/ExpFilter.h
         - includes/VisualEffect.h
         - includes/gaussian_filter1d.h
     ......
     

  3. Config the fastled light, and add some effects you like (as example below)

     light:
       - platform: fastled_clockless
     #  - platform: fastled_spi
         id: LedsStrip
         chipset: NEOPIXEL
         #chipset: APA102
         pin: GPIO21
         #data_pin: GPIO21
         #clock_pin: GPIO17
         num_leds: 60
         #rgb_order: BGR
         name: "MUSIC LEDS"
         effects:
           - addressable_rainbow:
           - addressable_lambda:
               name: Scroll with Music
               update_interval: 0s
               lambda: |-
                 music_leds.ShowFrame(MODE_SCROLL, &it);
           - addressable_lambda:
               name: Energy with Music
               update_interval: 0s
               lambda: |-
                 music_leds.ShowFrame(MODE_ENERGY, &it);
           - addressable_lambda:
               name: Spectrum with Music
               update_interval: 0s
               lambda: |-
                 music_leds.ShowFrame(MODE_SPECTRUM, &it);
     

  4. Compile and upload the firmware.

  5. Config the esphome in HomeAssistant

  Modify num_leds in configuration YAML, and N_PIXELS in music_leds_esphome.h both, if the number of LEDS is not 60.

• Config TouchPad

  If a TouchPad is connected to ESP32( which is already included in the HaChina's Microphone Shield ), you can config it to control the LED Strip.

  esp32_touch:
  #  setup_mode: True
  binary_sensor:
    - platform: esp32_touch
      name: "Touch Pad on ESP32"
      pin: GPIO32
      threshold: 1000
      on_press:
        then:
          - light.toggle: LedsStrip
  

Thanks

https://github.com/scottlawsonbc/audio-reactive-led-strip

Zack-Xu, designer of the microphone shield PCB.