• added attribute to hide smiley
• added attribute to disable display updates
• added calibration attributes with offset for temperature/humidity values
• changed pressing timeout for reset to 5 seconds
• added switching to degrees Fahrenheit by holding reset for 1 second
• replace generic Telink manufacturer code to a custom one
• display battery symbol if <10% left
• battery state checks at every 100th sensor reading

Updated functionality is available in zigbee2mqtt starting from 1.35.3 out-of-the-box

Full Changelog: https://github.com/devbis/z03mmc/compare/1.0.6...1.1.0

• added cluster to toggle ºC/ºF
• modified converter to add a toggle for degrees Fahrenheit
• device now pauses between entering steering mode for a minute if not connected to network to save battery
• default reporting values are updated with the converter for consistency
• fixed applying configured reporting immediately

• fixed reconnecting on network loss, e.g. rebooting coordinator
• fixed reset button behavior, clear all NV modules
• fixed connecting to a different coordinator after reset

Note: update convertor go get more frequent updates

• fixed humidity conversion for B1.4

Note: update convertor go get more frequent updates

• increased polling to 10 seconds
• rewritten reporting (thanks to @slacky1965 )
• updated convertor to get more frequent reports
• increased resolution to 0.01 units
• battery consumption greatly improved

• fixed display in revision 1.9
• improved battery consumption
• removed polling configuration
• decreased TX antenna power to 3 dBm

Initial release

• ZCL compliant temperature, humidity, and battery clusters
• displays for all revisions
• OTA upgrade support