What's Changed

• Device check and mem check by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/246
• Add py install requirement by @jaenrig-ifx in https://github.com/Infineon/XMC-for-Arduino/pull/251
• Refactor release ci by @jaenrig-ifx in https://github.com/Infineon/XMC-for-Arduino/pull/252
• added wait for ACK after a I2C transaction by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/250
• Sd card change by @OlafFilies in https://github.com/Infineon/XMC-for-Arduino/pull/255
• V3.x changes into master by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/254
• SPI SD and timeout I2C by @jaenrig-ifx in https://github.com/Infineon/XMC-for-Arduino/pull/256
• • fixed implementation of transfer(buf, count) to match standard Ardu… by @RudolphRiedel in https://github.com/Infineon/XMC-for-Arduino/pull/249
• Fix xmc flasher by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/261

New Contributors

• @OlafFilies made their first contribution in https://github.com/Infineon/XMC-for-Arduino/pull/255
• @RudolphRiedel made their first contribution in https://github.com/Infineon/XMC-for-Arduino/pull/249

Full Changelog: https://github.com/Infineon/XMC-for-Arduino/compare/V2.2.0...V3.0.0

What's Changed

• added section to README about the LED pin as input issue by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/228
• Sync develop with master (V2.x) by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/230
• Changes in boards.txt for V2.x by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/231
• Refactored built-in libraries by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/235
• V2.x LED Library reversed LED_BUILTIN by @techpaul in https://github.com/Infineon/XMC-for-Arduino/pull/233
• added changes to enable PWM channel in XMC1100 Boot Kit by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/239
• Variable gain ADC feature by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/240
• GPIO Init after USIC CH Start by @9Volts9er in https://github.com/Infineon/XMC-for-Arduino/pull/238
• Develop by @jaenrig-ifx in https://github.com/Infineon/XMC-for-Arduino/pull/248

Full Changelog: https://github.com/Infineon/XMC-for-Arduino/compare/V2.1.0...v2.2.0

What's Changed

• Added XMC1300 Boot Kit support in 2.x by @jaenrig-ifx in https://github.com/Infineon/XMC-for-Arduino/pull/220

Full Changelog: https://github.com/Infineon/XMC-for-Arduino/compare/V2.0.0...V2.1.0

• Support for XMC1400 Kit for Arduino board
• Support for XMC4200 Platform 2Go board
• Removed following libraries:
  • BGT24LTR11-Pulsed-Doppler-Radar library
  • DSP
  • IFX9021
  • Mouse
  • Multi-Serial
  • USB
  • Ultrasonic
  • Sense2Go
• Removed unused/deprecated boards:
  • XMC1100 H-Bridge 2Go
  • XMC1300 Boot Kit
  • XMC1300 Sense2GoL
  • Radar Baseboard XMC4700

What's Changed

• updated libraries folder by @IFX-Anusha in https://github.com/Infineon/XMC-for-Arduino/pull/195
• Remove Reset pin from Digital Pin mapping XMC1100 Boot Kit by @techpaul in https://github.com/Infineon/XMC-for-Arduino/pull/200
• Stable develop into develop 2.x for version 2.x release by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/204
• Proper fix for issue 199 - to go into version 2.x by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/208
• Feature/board remove by @jaenrig-ifx in https://github.com/Infineon/XMC-for-Arduino/pull/210
• added PWM to pins 10 and 11 of XMC1400 Arduino Kit as per user manual by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/212
• Develop with release 2.0.0 - Boards/Libraries clean up by @jaenrig-ifx in https://github.com/Infineon/XMC-for-Arduino/pull/214
• develop into develop for 2.x changes by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/216
• Develop by @jaenrig-ifx in https://github.com/Infineon/XMC-for-Arduino/pull/219

Full Changelog: https://github.com/Infineon/XMC-for-Arduino/compare/V1.7.0...V2.0.0

What's Changed

• Fixes and raw data interface for BGT24LTR11-Pulsed-Doppler-Radar lib by @mkiessling-ifx in https://github.com/Infineon/XMC-for-Arduino/pull/171
• Update to support RF-Shield Rev. 3.0 by @mkiessling-ifx in https://github.com/Infineon/XMC-for-Arduino/pull/180
• Improve Maintainability of pins_arduino.h by @techpaul in https://github.com/Infineon/XMC-for-Arduino/pull/183
• Develop repeat of 183 into master by mistake by @techpaul in https://github.com/Infineon/XMC-for-Arduino/pull/184
• updated compiler to version 10.3-2021.10 by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/187
• Enable XMC1400 Kit for Arduino board into the Arduino IDE by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/190
• Devmaster merge by @jaenrig-ifx in https://github.com/Infineon/XMC-for-Arduino/pull/192
• Develop by @jaenrig-ifx in https://github.com/Infineon/XMC-for-Arduino/pull/193
• Fix for Issue #185 by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/191
• PWM functionality on some pins of XMC1100 Boot Kit by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/194
• Enable XMC4200 P2GO by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/198
• Tidy up variants and documentation by @techpaul in https://github.com/Infineon/XMC-for-Arduino/pull/196
• Fix for issue #197 by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/202
• Fix for issue 199 for version 1.x by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/207
• 24 ghz radar by @IFX-Anusha in https://github.com/Infineon/XMC-for-Arduino/pull/205
• Develop by @jaenrig-ifx in https://github.com/Infineon/XMC-for-Arduino/pull/213
• develop 1.x into develop1.x to release as v1.7.0 by @boramonideep in https://github.com/Infineon/XMC-for-Arduino/pull/217
• Develop 1.x by @jaenrig-ifx in https://github.com/Infineon/XMC-for-Arduino/pull/218

Full Changelog: https://github.com/Infineon/XMC-for-Arduino/compare/V1.6.0...V1.7.0

• Added Github Actions release automation
• Support for XMC4400 Platform 2Go Board
• Added Board.txt support for DSP and NN ARM libraries
• Conditional compiler flags in USBLIB for XMC4xxx family
• Updated "platform.txt" compiler and linke configuration
• Updated libraries:
  • BGT24LTR11-Pulsed-Doppler-Radar library
  • DMA
  • I2S
  • IFX9021
  • LED
  • Multi-Serial (NEW)
  • OneWire
  • SPI
  • Radar
  • Wire

Additional ADC and PWM on XMC2Go board ports: Pin 1 -> MISO and PWM Pin 2 -> SCK and PWM Pin 3 -> SS and PWM Pin 10 -> SCL and analog (A3) Pin 11 -> SDA and analog (A2) Pin 12 -> analog (A1) Pin 13 -> analog (A0)

• Fixed preprocessors typos
• Improved Analog CCU8 PWM and PMW accuracy
• Extended analog inputs on Boot Kits
• Fixed XMC2Go pins bug
• Fixed movement operator
• Added features and fixed issues in H-Bridge2Go Implementation
• Fixed compiler warnings
• Updated Travis yaml
• Added support for Radar Baseboards XMC4700

Changes

Changed Features

• Changed I2S Library for XMC
• Added examples for I2S library for IM69D130 Microphone Shield2Go