Control WS2812B and many more types of digital RGB LEDs with an ESP8266 or ESP32 over WiFi!
May the ray of light inspire you to do great things.
WLED 0.15.0-b2 is progressive update of 0.15.0-b1.
This version's highlights are:
info.clock
- CPU clock in MHzinfo.flash
- flash size in MB"col":[int|string|object|array, int|string|object|array, int|string|object|array]
int
= Kelvin temperature or 0 for black
string
= hex representation of [WW]RRGGBB
object
= individual channel control {"r":0,"g":127,"b":255,"w":255}
, each being optional (valid to send {})
array
= direct channel values [r,g,b,w] (w element being optional){"seg":[{"pal":"X~Y~"}]}
or {"seg":[{"pal":"X~Yr"}]}
)NOTE:
Included with this release are bootloaders for S2, S3 and C3 chips as well as partition maps for 4M and 8M flash sizes for them. You will need to flash bootloaders at offset 0x00000 for C3 and S3 and at 0x01000 for S2, partition maps at offset 0x08000, when flashing manually using esptool
. Firmware is flashed at offset 0x10000.
Please see the changelog for a detailed list of changes!
Full Changelog: https://github.com/Aircoookie/WLED/compare/v0.14.0...v0.15.0-b2
WARNING:
This version includes binaries for ESP8266 which feature double CPU clock frequency (160MHz) distinguished by the _160
name suffix. Although it has been tested on many variants of ESP8266 there may be devices that do not support overclocking the CPU. If your device is in places hard to reach or difficult to flash DO NOT use these binaries unless you test them on a similar device first. And even then there are no guarantees that a particular device will run correctly with overclocked CPU.
In case you do update with 160MHz version and your device fails to boot or operates incorrectly you may need to connect it to a computer and flash it serially using USB connection. Please erase flash prior to doing so.
A huge thank you to the WLED community - to everyone who has contributed to development, documentation and testing, and to all early adopters who provided lots of feedback and sparked many discussions on how to improve things. You all made WLED better and made this version happen! ❤️
If you saw a shooting star, what would you wish for?
WLED 0.14.3 is a maintenance release for 0.14.2 with a bugfix for transition 0 and newer AsyncWebServer.
WARNING:
This version includes binaries for ESP8266 which feature double CPU clock frequency (160MHz) distinguished by the _160
name suffix. Although it has been tested on many variants of ESP8266 there may be devices that do not support overclocking the CPU. If your device is in places hard to reach or difficult to flash DO NOT use these binaries unless you test them on a similar device first. And even then there are no guarantees that a particular device will run correctly with overclocked CPU.
In case you do update with 160MHz version and your device fails to boot or operates incorrectly you may need to connect it to a computer and flash it serially using USB connection. Please erase flash prior to doing so.
A huge thank you to the WLED community - to everyone who has contributed to development, documentation and testing, and to all early adopters who provided lots of feedback and sparked many discussions on how to improve things. You all made WLED better and made this version happen! ❤️
Please see the changelog for a detailed list of changes!
Full Changelog: https://github.com/Aircoookie/WLED/compare/v0.14.0...v0.14.3
May the ray of light inspire you to do great things.
WLED 0.15.0-b1 is major new step since the introduction of 2D and audioreactive features to WLED.
This version's highlights are:
WLED_NTP_ENABLED
, WLED_TIMEZONE
, WLED_UTC_OFFSET
, WLED_LAT
and WLED_LON
)Please see the changelog for a detailed list of changes!
Full Changelog: https://github.com/Aircoookie/WLED/compare/v0.14.0...v0.15.0-b1
WARNING:
This version includes binaries for ESP8266 which feature double CPU clock frequency (160MHz) distinguished by the _160
name suffix. Although it has been tested on many variants of ESP8266 there may be devices that do not support overclocking the CPU. If your device is in places hard to reach or difficult to flash DO NOT use these binaries unless you test them on a similar device first. And even then there are no guarantees that a particular device will run correctly with overclocked CPU.
In case you do update with 160MHz version and your device fails to boot or operates incorrectly you may need to connect it to a computer and flash it serially using USB connection. Please erase flash prior to doing so.
A huge thank you to the WLED community - to everyone who has contributed to development, documentation and testing, and to all early adopters who provided lots of feedback and sparked many discussions on how to improve things. You all made WLED better and made this version happen! ❤️
All contributors for this version include: @ajotanc @akaricchi @BaptisteHudyma @dedehai @demophoon @Derek4aty1 @ezcGman @imeszaros @itstefanjanos @lost-hope @m-wachter @micw @MoonModules @moustachauve @muebau @netmindz @roelbroersma @shammy642 @TripleWhy @willmmiles @w00000dy @zanhecht
If you saw a shooting star, what would you wish for?
WLED 0.14.2 is a maintenance release for 0.14.1, with many bugfixes.
WARNING:
This version includes binaries for ESP8266 which feature double CPU clock frequency (160MHz) distinguished by the _160
name suffix. Although it has been tested on many variants of ESP8266 there may be devices that do not support overclocking the CPU. If your device is in places hard to reach or difficult to flash DO NOT use these binaries unless you test them on a similar device first. And even then there are no guarantees that a particular device will run correctly with overclocked CPU.
In case you do update with 160MHz version and your device fails to boot or operates incorrectly you may need to connect it to a computer and flash it serially using USB connection. Please erase flash prior to doing so.
A huge thank you to the WLED community - to everyone who has contributed to development, documentation and testing, and to all early adopters who provided lots of feedback and sparked many discussions on how to improve things. You all made WLED better and made this version happen! ❤️
Please see the changelog for a detailed list of changes!
Full Changelog: https://github.com/Aircoookie/WLED/compare/v0.14.1...v0.14.2
If you saw a shooting star, what would you wish for?
WLED 0.14.2-b2 is a maintenance release for 0.14.1, with many bugfixes.
A huge thank you to the WLED community - to everyone who has contributed to development, documentation and testing, and to all early adopters who provided lots of feedback and sparked many discussions on how to improve things. You all made WLED better and made this version happen! ❤️
Please see the changelog for a detailed list of changes!
Full Changelog: https://github.com/Aircoookie/WLED/compare/v0.14.1...v0.14.2-b2
If you saw a shooting star, what would you wish for?
WLED 0.14.2-b1 is a maintenance release for 0.14.1, with many bugfixes.
A huge thank you to the WLED community - to everyone who has contributed to development, documentation and testing, and to all early adopters who provided lots of feedback and sparked many discussions on how to improve things. You all made WLED better and made this version happen! ❤️
Please see the changelog for a detailed list of changes!
Full Changelog: https://github.com/Aircoookie/WLED/compare/v0.14.1...v0.14.2-b1
If you saw a shooting star, what would you wish for?
WLED 0.14.1 is a maintenance release for 0.14.0, with many bugfixes and some new features.
A huge thank you to the WLED community - to everyone who has contributed to development, documentation and testing, and to all early adopters who provided lots of feedback and sparked many discussions on how to improve things. You all made WLED better and made this version happen! ❤️
#HH
and #MM
placeholders for Scrolling Text (#3480)Please see the changelog for a detailed list of changes!
Full Changelog: https://github.com/Aircoookie/WLED/compare/v0.14.0...v0.14.1
Debug builds are providing additional diagnostic outputs when connected to a serial monitor by USB. You can find a few generic debug builds here: https://github.com/srg74/WLED-wemos-shield/tree/master/resources/Firmware/%40Aircoookie/Latest/Debug_builds
You might be asked for a crash report (backtrace showing the function that crashed) using a debug build. This is only possible when self-compiling WLED in the VSCode+platformio development environment.
In a nutshell, this is what you should do:
-DWLED_DEBUG
to build_flags, then click File -> Save All
This is another "golden master" for the upcoming final release of WLED 0.14.1. So please test it ;-)
If you saw a shooting star, what would you wish for?
WLED 0.14.1 is a maintenance release for 0.14.0, with many bugfixes and some new features.
A huge thank you to the WLED community - to everyone who has contributed to development, documentation and testing, and to all early adopters who provided lots of feedback and sparked many discussions on how to improve things. You all made WLED better and made this version happen! ❤️
Please see the changelog for a detailed list of changes!
Full Changelog: https://github.com/Aircoookie/WLED/compare/v0.14.0...v0.14.1-b3
This is another "golden master" for the upcoming final release of WLED 0.14.1. So please test it ;-)
If you saw a shooting star, what would you wish for?
WLED 0.14.1 is a maintenance release for 0.14.0, with many bugfixes and some new features.
A huge thank you to the WLED community - to everyone who has contributed to development, documentation and testing, and to all early adopters who provided lots of feedback and sparked many discussions on how to improve things. You all made WLED better and made this version happen! ❤️
Please see the changelog for a detailed list of changes!
Full Changelog: https://github.com/Aircoookie/WLED/compare/v0.14.0...v0.14.1-b2
This is the "golden master" for the upcoming final release of WLED 0.14.1. So please test it ;-)
If you saw a shooting star, what would you wish for?
WLED 0.14.1 is a maintenance release for 0.14.0, with many bugfixes and some new features.
A huge thank you to the WLED community - to everyone who has contributed to development, documentation and testing, and to all early adopters who provided lots of feedback and sparked many discussions on how to improve things. You all made WLED better and made this version happen! ❤️
Please see the changelog for a detailed list of changes!
Full Changelog: https://github.com/Aircoookie/WLED/compare/v0.14.0...v0.14.1-b1