Whsnbg Save

Wireless home sensor network broker-gateway (whsnbg)

This repository is a part of the HomeWSN project.

Whsnbg is a C implementation of the MQTT server(broker), the MQTT-SN gateway and simple MQTT rules engine designed for embedded platforms with small memory requirements (like OpenWrt).

Supported features

MQTT server (broker):

• MQTT Protocol Specification Versions 3.1.0 and 3.1.1.
• Both plain TCP and Websockets connections on the selectable IPv4 network interface.
• SSL(TLS) encryption provided by the external library axTLS or OpenSSL.
• QoS level 0, 1 and 2.
• User authorization.
• Remote MySQL database support for the specific topics.

MQTT-SN gateway:

• MQTT-SN Protocol Specification Version 1.2.
• UDP connection on the selectable IPv4 network interface.
• QoS level 0, 1 and 2.
• active, asleep and awake states of the sensors.
• Remote MySQL database support for the specific topics.

MQTT rules engine:

• Rules are stored in the specific rules topic ($SYS/rulesengine/rules) and the external whsnbg.rules file.
• Rules can be modified on the fly by publishing to this specific rules topic.
• The rule set includes triggers (based on the cron or mqtt publish events), actions, conditions and the internal variables.

Building (Linux)

Download the latest release in tarball from github and untar it:

$ curl -L https://github.com/homewsn/whsnbg/archive/v1.4.tar.gz | tar zx
$ cd whsnbg-1.4

Or you can also clone whsnbg repository:

$ git clone https://github.com/homewsn/whsnbg.git
$ cd whsnbg

Then build possibly with options and install:

$ make
$ sudo make install

Configure the execution options:

$ sudo nano /usr/local/etc/whsnbg.conf

Change mqtt_iface from eth0 to the required network interface, for example enp0s3. Change mqttsn_iface from eth0 to the required network interface, for example enp0s3 or sl0 etc. You can always find out the network interfaces by running $ ifconfig.

Building (Windows)

Download the latest release in zip from github and unzip it. Open the MSVS 2010 solution, build and run whsnbg.exe file.

Building (OpenWrt)

• Install OpenWrt buildroot.
• Add the following line to the feeds.conf.default in the OpenWrt buildroot:

src-git homewsn https://github.com/homewsn/homewsn.openwrt.packages.git

• This feed should be included and enabled by default in the OpenWrt buildroot. To install all its package definitions, run:

$ ./scripts/feeds update homewsn
$ ./scripts/feeds install -a -p homewsn

• The packages should now appear in menuconfig. You can find and select whsnbg in the Network menu.
• Exit and save new configuration, then compile the package:

$ make package/whsnbg/compile V=99

Build options (Linux)

Build options can be set on the command line with the make command, for example:

$ make DAEMON_VERSION=1 DETAILED_LOG=1

Build options (Windows)

Build options should be set manually in the config.h file, for example:

// Windows
// ** Manually configure ** >>>>>

#define USE_TLS_LIBRARY			// use external TLS library
// TLS library
#define OPENSSL_LIBRARY		// OpenSSL
//#define AXTLS_LIBRARY			// axTLS
//#define SSL_LIBRARY_HEADERS	// TLS library headers

...

// <<<<< ** Manually configure **

Build options (OpenWrt)

$ make menuconfig

Then find Network -> whsnbg and press Enter. Configure options, setting to <*> or < >.

Configuration options

The execution configuration is in res/whsnbg.conf file (Winodws) or /usr/local/etc/whsnbg.conf (Linux) by default. For Linux please make sure that you specify the correct mqtt_iface and mqttsn_iface parameters (they do not matter for Windows only). If incorrect interfaces are specified, then the program will end immediately.

# name = value
# maximum name length is 32 bytes
# maximum value length is 64 bytes

# MQTT section (tcp ports)
mqtt_iface = eth0
mqtt_port = 1883
mqtt_tls_port = 8883
mqtt_ws_port = 8082
mqtt_ws_tls_port = 8081

# MQTT-SN section (udp port)
mqttsn_iface = eth0
mqttsn_port = 1883

# MySQL section (remote MySQL database)
mysql_enable = 0
mysql_server = 192.168.0.213
mysql_user = whsnbg
mysql_password = some_pass
mysql_database = homewsn
mysql_port = 3306

# MQTT users section
mqtt_auth_enable = 0
user_name = name1
user_password = password1
user_publish_enable = 1
user_name = name2
user_password = password2
user_publish_enable = 0

Dependencies

• If you enable TSL support please be sure you have installed the appropriate library (axTLS or OpenSSL).
• If you enable storing payload in the MySQL database you will need MySQL client library.

License

GNU GPL v 2.0