Over 70 advanced BadUSB scripts for the Flipper Zero! By downloading the files, you automatically agree to the license and the terms outlined in the ReadMe. If you have any questions, please don't hesitate to join the community discord server. Thank you for using my scripts!
Join the Discord-Community: https://discord.gg/rabbit-labs
In order to begin, you must read and accept
the usage agreement. This project is for educational purposes only! Please seek permission before running any of the scripts provided by me. I cannot be held responsible for any damage that may occur as a result of your use of these scripts.
If you want to purchase a completely unique and personalized script contact me on discord.
Windows:
1. git clone https://github.com/UNC0V3R3D/Flipper_Zero-BadUsb.git
2. Use the qFlipper app to drag the files into the "BadUsb" folder on your Flipper.
To begin using the scripts, please carefully read
the "readme.md" file provided with each script. This file contains important information
on how to use the script safely. Keep in mind that some scripts may potentially harm your system
, so be cautious and do not run unfamiliar scripts on your personal computer. To test scripts, it is recommended to use a virtual machine
for safety.
MEMZ.exe script
NoMoreSound.txt
Scriptfixed
DeleteMicrosoftStore.txt
and fixed link to MEMZ.exea lot
of new files, fixed a few filesChangeWinUsername.txt
and setWinPass.txt
DownLoadASCII
and seperated Selfwriting
Ascii20x faster
important info
about the scriptGoodUSB
folderSAM exfiltration
By downloading and using the scripts provided by UNC0V3R3D, you are automatically agreeing to the following usage agreement. If you do not agree to the terms of this agreement, you are not permitted to download or use the scripts.
is not responsible
for your actions or any damage you may cause as a result of using the scripts.permitted
to share all of the files.allowed
to modify the files, but are still responsible for your own actions.In this quick instruction, you are going to learn how to set up the scripts and use them properly. If you have any questions after reading this instruction, just DM me on Discord (UNC0V3R3D#8662).
1. Clone/Download the files directly from the repo or download the latest release.
2. Extract the files anywhere you like
3. If you are using a phone, just install the Flipper Zero mobile app.
4. If you are using a PC, just install the qFlipper app: https://flipperzero.one/update
5. Connect your Flipper via Bluetooth if you are using a phone, or connect it via usb if you are on PC.
6. Open qFlipper --> SD Card --> badusb --> Move the files here.
7. Now you are done with moving the files to your Flipper.
Before using the files on your Flipper, it is important to thoroughly understand them. While the majority of the files in my BadUsb repository are relatively harmless, there are some that may potentially cause serious damage. It is important to exercise caution when using these files.
DuckyScript 1.0
language.easy
to understand and to learn.hard part
are the PowerShell scripts.97%
of all DuckyScripts.full power
over the machine.REM
at the beginning.explain the whole process
and help you a lot.own
PC.BadUSB
category.Troubleshooting section
and follow the steps.First of all, you have to identify the problem. Then you can look at the list below and maybe you will recognize your problem.
1.0
The script open random things and typed the text somewhere, where it shouldn't be.
too short delays
between the commands. In the BadUsb script file, you should see some commands, that start with DELAY
and then there is a number behind it. Example: DELAY 500
. The number stands for milliseconds
. Changing the delay to a higher number
than the current number should solve the problem (DELAY 500 --> DELAY 700)
1.1
The Flipper shows an error like this: ERROR: line 5
text file
. The most common thing causing this error is apparently a random blank line
between the commands. Otherwise, make sure there is no line containing the "LOCALE .."
command. It doesn't properly work on the Flipper, yeah I do not know why that is. If there is still an error, look at the line where the error is coming from and make sure there is no space
at the beginning of the line.
I hope that you find a a solution for your problem. If you need help feel free to always contact me via Discord or Email.
If you have any idea on how to make this Instruction to BadUsb scripts better, feel free to open an Issue or contact me via Discord. :)
UNC0V3R3D – @GitHub – [email protected]
Distributed under the Attribution-NonCommercial-ShareAlike 4.0 International
license. See LICENSE.md
for more information.
https://github.com/UNC0V3R3D/Flipper_Zero-BadUsb