Uinput

This package provides pure go wrapper functions for the LINUX uinput device, which allows to create virtual input devices in userspace. At the moment this package offers a virtual keyboard implementation as well as a virtual mouse device,gamepad, a touch pad device & a dial device.

The keyboard can be used to either send single key presses or hold down a specified key and release it later (useful for building game controllers). The mouse device issues relative positional change events to the x and y axis of the mouse pointer and may also fire click events (left and right click). For implementing things like region selects via a virtual mouse pointer, press and release functions for the mouse device are also included.

The touch pad, on the other hand can be used to move the mouse cursor to the specified position on the screen and to issue left and right clicks. Note that you'll need to specify the region size of your screen first though (happens during device creation).

Dial devices support triggering rotation events, like turns on a volume knob.

Please note that you will need to make sure to have the necessary rights to write to uinput. You can either chmod your uinput device, or add a rule in /etc/udev/rules.d to allow your user's group or a dedicated group to write to the device. You may use the following two commands to add the necessary rights for you current user to a file called 99-$USER.rules (where $USER is your current user's name):

echo KERNEL==\"uinput\", GROUP=\"$USER\", MODE:=\"0660\" | sudo tee /etc/udev/rules.d/99-$USER.rules
sudo udevadm trigger

Installation

Simply check out the repository and use the commands

go build && go install

The package will then be installed to your local respository, along with the package documentation. The documentation contains more details on the usage of this package.

Alternatively, if you'd like to use a specific version/tag of this library, you may use the gopkg.in service. To get v.1.x.x (latest stable v1), simply enter this on your command line:

go get gopkg.in/bendahl/uinput.v1

To import this version in your code use:

import "gopkg.in/bendahl/uinput.v1"

You may then refer to it as "uinput" in your code. For further details see: https://gopkg.in/bendahl/uinput.v1

Thanks to gopkg.in for offering this great service!

Usage

The following section explains some common ways to use this lib.

Using the virtual keyboard device:

package main

import "github.com/bendahl/uinput"
// alternatively (to use specific version), use this:
//import "gopkg.in/bendahl/uinput.v1"

func main() {
	// initialize keyboard and check for possible errors
	keyboard, err := uinput.CreateKeyboard("/dev/uinput", []byte("testkeyboard"))
	if err != nil {
		return
	}
	// always do this after the initialization in order to guarantee that the device will be properly closed
	defer keyboard.Close()

	// prints "a"
	keyboard.KeyPress(uinput.KeyA)

	// prints "A"
	// Note that you could use caps lock instead of using shift with KeyDown and KeyUp
	keyboard.KeyDown(uinput.KeyLeftshift)
	keyboard.KeyPress(uinput.KeyA)
	keyboard.KeyUp(uinput.KeyLeftshift)

	// prints "00000"
	for i := 0; i < 5; i++ {
		keyboard.KeyPress(uinput.Key0)
	}
}

Using the virtual mouse device:

package main

import "github.com/bendahl/uinput"
// alternatively (to use specific version), use this:
//import "gopkg.in/bendahl/uinput.v1"

func main() {
	// initialize mouse and check for possible errors
	mouse, err := uinput.CreateMouse("/dev/uinput", []byte("testmouse"))
	if err != nil {
		return
	}
	// always do this after the initialization in order to guarantee that the device will be properly closed
	defer mouse.Close()

	// mouse pointer will be moved up by 10 pixels
	mouse.MoveUp(10)
	// mouse pointer will be moved to the right by 10 pixels
	mouse.MoveRight(10)
	// mouse pointer will be moved down by 10 pixels
	mouse.MoveDown(10)
	// mouse pointer will be moved to the left by 10 pixels (we're back to where we started)
	mouse.MoveLeft(10)
        // move the mouse pointer by 100 pixels on the x and y axes (right and down in this case) 
        mouse.Move(100, 100)

	// click left
	mouse.LeftClick()
	// click right (depending on context a context menu may appear)
	mouse.RightClick()
	// click middle (usually the scroll wheel)
	mouse.MiddleClick()

	// hold down left mouse button
	mouse.LeftPress()
	// move mouse pointer down by 100 pixels while holding down the left key
	mouse.MoveDown(100)
	// release the left mouse button
	mouse.LeftRelease()

	// wheel up
	mouse.Wheel(false, 1)
	// wheel down
	mouse.Wheel(false, -1)
	// horizontal wheel left
	mouse.Wheel(true, 1)
	// horizontal wheel right
	mouse.Wheel(true, -1)
}

Using the virtual touch pad device:

package main

import "github.com/bendahl/uinput"
// alternatively (to use specific version), use this:
//import "gopkg.in/bendahl/uinput.v1"

func main() {
	// initialization of the touch device requires to set the screen boundaries
	// min and max values for x and y axis need to be set (usually, 0 should be a sane lower bound)
	touch, err := uinput.CreateTouchPad("/dev/uinput", []byte("testpad"), 0, 800, 0, 600)
	if err != nil {
		return
	}
	// always do this after the initialization in order to guarantee that the device will be properly closed
	defer touch.Close()

	// move pointer to the position 300, 200
	touch.MoveTo(300, 200)
	// press the left mouse key, holding it down
	touch.LeftPress()
	// move pointer to position 400, 400
	touch.MoveTo(400, 400)
	// release the left mouse key
	touch.LeftRelease()
	// create a single tab using a finger and immediately release
	touch.TouchDown()
	touch.TouchUp()

}

Using the virtual dial device:

package main

import "github.com/bendahl/uinput"
// alternatively (to use specific version), use this:
//import "gopkg.in/bendahl/uinput.v1"

func main() {
	// initialize dial and check for possible errors
	dial, err := uinput.CreateDial("/dev/uinput", []byte("testdial"))
	if err != nil {
		return
	}
	// always do this after the initialization in order to guarantee that the device will be properly closed
	defer dial.Close()

	// turn dial left
	dial.Turn(-1)
	// turn dial right
	dial.Turn(1)
}

License

The package falls under the MIT license. Please see the "LICENSE" file for details.

Current Status

2018-03-31: I am happy to announce that v1.0.0 is finally out! Go ahead and use this library in your own projects! Feedback is always welcome.

2019-03-24: Release v1.0.1 fixes a positioning issue that affects the touchpad. See issue #11 for details (positioning works now, but a (possibly) better solution is under investigation).

2019-07-24: Don't panic! As of version v1.0.2 the uinput library will provide an error instead of raising a panic in case of a faulty initialization. See pull request #12 for details (many thanks to muesli for the contribution).

2019-09-15: Add single touch event (resistive)

2019-12-31: Release v1.1.0 introduces yet another cool feature: Mouse wheel support. Thanks to muesli for this contribution!

2020-01-07: Release v1.2.0 introduces dial device support. Thanks again to muesli!

2020-11-15: Release v1.4.0 introduces a new Move(x, y) function to the mouse device along with a little cleanup and additional tests. Thanks robpre and MetalBlueberry for your valuable input!

2021-03-25: Release v1.4.1 fixes a keyboard issue that may affect android systems. See issue #24 for details.

2022-01-09: Release v1.5.0 introduces middle button support for the mouse. Thanks so much to @jbensmann for the great work! Also, thank you @djsavvy for the thorough review!

2022-02-11: Release v1.5.1 finally fixes the MoveTo(x, y) function of the touch pad device. Big shout out to @mafredri for this find! Thank you so much!

2022-09-01: Release v1.6.0 adds a new gamepad device. Thanks @gitautas for providing the implementation and thanks to @AndrusGerman for the inspiration! Also, thanks to @sheharyaar there is now a new function FetchSyspath() that returns the syspath to the device file.

2023-04-27: Release 1.6.1 fixes uinput functionality on Wayland. Thanks to @gslandtreter for this fix and for pointing out the relevant piece of documentation!

2023-05-10: Release 1.6.2 fixes uinput an issue introduced in version 1.6.1 that will break backward compatibility. The change will be reverted for now. Options to improve compatibility with newer systems are being evaluated. Thanks to @wenfer for the hint!

2023-11-22: Release 1.7.0 adds support for multitouch devices! Thanks to @SnoutBug for this addition! See issue #37 for details.

TODO

The current API can be considered stable and the overall functionality (as originally envisioned) is complete. Testing on x86_64 and ARM platforms (specifically the RaspberryPi) has been successful. If you'd like to use this library on a different platform that supports Linux, feel free to test it and share the results. This would be greatly appreciated.

• Create Tests for the uinput package
• Migrate code from C to GO
• Implement relative input
• Implement absolute input
• Test on different platforms
  • x86_64
  • ARMv6 (RaspberryPi)
• Implement functions to allow mouse button up and down events (for region selects)
• Move CI pipeline