HeartBeat is a tool for tracking project delivery metrics that can help you get a better understanding of delivery performance. This product allows you easily get all aspects of source data faster and more accurate to analyze team delivery performance which enables delivery teams and team leaders focusing on driving continuous improvement and enhancing team productivity and efficiency.
Heartbeat is a tool for tracking project delivery metrics that can help you get a better understanding of delivery performance. This product allows you easily get all aspects of source data faster and more accurate to analyze team delivery performance which enables delivery teams and team leaders focusing on driving continuous improvement and enhancing team productivity and efficiency.
State of DevOps Report is launching in 2019. In this webinar, The 4 key metrics research team and Google Cloud share key metrics to measure DevOps performance, measure the effectiveness of development and delivery practices. They searching about six years, developed four metrics that provide a high-level systems view of software delivery and performance. Based on that, Heartbeat introduce below metrics as below.
8 metrics supported by heartbeat:
Here is the user manaul for Version 1 on 2020/06. For now, we just can support Jira/Buildkite/Github to generate the corresponding metrics data.
Type | Board | Pipeline | Repo |
---|---|---|---|
Support tools | Jira √ Trello × | Buildkite √ Teamcity × GoCD × | Github √ Bitbucket × |
Note: “√” means can support, “×” means can not support
Before generator the metrics data, user need to config the project info, in Home page (Image3-1), you can create a new project for your project, or you can import a project config json file (If you already saved one config file, for import file feature will introduce in “Import and Export feature ”).
Image 3-1,home page
If you are first use the product, you need to select “Create A New Project”,it will go to config page (Image 3-2)
Image 3-2,Project config page
Users need to select a period of time, then all of the data that follows is based on that time period.
Have two items of time period:
All need to select which data you want to get, for now, we support seven metrics data (Image 3-3). Those seven metrics are Deployment Frequency (DF)
, Lead Time for changes (LTC)
, Mean Time To Recover (MTTR)
, Change Failure Rate (CFR)
, and Velocity
, Cycle time
, Classification
, where
Velocity
: includes how many story points and cards we have completed within selected time period.Cycle time
: the time it take for each card start to do until move to done.Classification
: provide different dimensions to view how much efforts team spent within selected time period.
Image 3-3,Metrics Data
User can not select future time in calendar (both start time & end time). The max date interval between start time and end time is 31 days (e.g. 01/01/2024 - 01/31/2024).
Invalid dates may be, e.g. future dates, interval between start time and end time is more than 31 days, end time is before start time, etc.
If user selects and invalid date, a warning may be shown.
Because all metrics data from different tools that your projects use. Need to have the access to these tools then you can get the data. So after select time period and metrics data, then you need to input the config for different tools(Image 3-4).
According to your selected required data, you need to input account settings for the respective data source. Below is the mapping between your selected data to data source.
Required Data | Datasource |
---|---|
Velocity | Board |
Cycle time | Board |
Classification | Board |
Rework times | Board |
Lead time for changes | Repo,Pipeline |
Deployment frequency | Pipeline |
Dev change failure rate | Pipeline |
Dev mean time to recovery | Pipeline |
Image 3-4,Project config
The details for board:
Items | Description |
---|---|
Board Type | Support two types of board: Classic Jira and Next-gen Jira |
Board Id | The value of BoardId is number. You need to find it from your team’s Jira board URL. For Example: 1. Your jira board URL like below, then 2 is the boardId https://dorametrics.atlassian.net/jira/software/projects/ADM/boards/2 2. Your jira board URL like below, then rapidView=3, 3 is the boardId https://pokergame.atlassian.net/secure/RapidBoard.jspa?projectKey=KAN1&useStoredSettings=true&rapidView=3 |
ProjectKey | You can find it from your team’s Jira board URL. For Example: 1. Your jira board URL like below, then ADM is the projectkey https://dorametrics.atlassian.net/jira/software/projects/ADM/boards/2 2. Your jira board URL like below, then projectKey is KAN1 https://pokergame.atlassian.net/secure/RapidBoard.jspa?projectKey=KAN1&useStoredSettings=true&rapidView=3 |
Site | Site is the domain for your jira board, like below URL, dorametrics is the site https://dorametrics.atlassian.net/jira/software/projects/ADM/boards/2 |
The email can access to the Jira board | |
Token | Generate a new token with below link, https://id.atlassian.com/manage-profile/security/api-tokens |
Image 3-5, create Jira token
The details for Pipeline:
Items | Description |
---|---|
PipelineTool | The pipeline tool you team use, currently heartbeat only support buildkite |
Token | Generate buildkite token with below link, https://buildkite.com/user/api-access-tokens |
Select organization for you pipeline Choose "Read Builds","Read Organizations" and "Read Pipelines". Image 3-6, generate Buildkite token
The details for SourceControl:
Items | Description |
---|---|
SourceControl | The source control tool you team use, currently heartbeat only support Github |
Token | Generate Github token with below link(classic one), https://github.com/settings/tokens |
Generate new token (classic) Select repo from scopes Image 3-7, generate classic GitHub token
Image 3-8, authorize GitHub token with correct organization
After inputting the details info, users need to click the Verify
button to verify if can access to these tool. Once verified, they could click the Next
button go to next page -- Config Metrics page(Image 3-5,Image 3-6,Image 3-7)
Image 3-9, Crews/Board Mappings config
Crew Settings: You could select your team members from a list get from board source. The list will include the assignees for those tickets that finished in the time period selected in the last step.
Cycle Time: It will list all columns for the current active jira board. Then users need to map the each column to the supported columns. Like, if your board have “in progress” column, it means developer doing this ticket, so it should be mapping with “In Dev” for the list we provide.
Status | Description |
---|---|
To do | It means the ticket needs to be done, waiting for Dev to pick it. Cycle time doesn't include this time. |
Analysis | BA or other people still need to analyze the ticket. Cycle time doesn't include this time. |
In Dev | It means dev is doing the ticket. This time should be a part of cycle time. And it is named development time. |
Block | It means the tickets blocked by some issues, cannot be done now. This time should be a part of cycle time. And it is named block time. |
Waiting for testing | It means waiting for Dev to pick or QA to testing. This time should be a part of cycle time. And it is named waiting time. |
Testing | It means QA is testing the tickets. This time should be a part of cycle time. And it is named testing time. |
Review | It means PO or other people are reviewing the tickets. This time should be a part of cycle time. And it is named review time. |
Done | It means the tickets are already done. Cycle time doesn't include this time. |
-- | If you don't need to map, you can select -- |
By Status: user can click the toggle selected button to choose the mapping relationship by column or by status. It support multiple status map in to one column, just as the picture shows the TODO and INPROGRESS board status can be mapped to different heartbeat states.
Image 3-10,By Status
Image 3-11,Classification Settings
In classification settings, it will list all Context fields for your jira board. Users can select anyone to get the data for them. And according to your selection, in the export page, you will see the classification report to provide more insight with your board data.
Image 3-12,Rework times Settings
In Rework times settings, it contains Rework to which state Input and Exclude which states(optional) Input. The options in the Rework to which state Input are all from Board mappings, the options are ordered, and when an option is selected, the rework information of the option and all subsequent options will be counted in the report page and export file. The Exclude which states(optional) Input can help you exclude certain subsequent options (image 3-7).
Image 3-13,advanced Settings
In advanced settings, it contains story points Input and Flagged Input. Users can input story points and Flagged custom-field on their own when the jira board has permission restriction . And according to these input, in the export page, user can get correct story points and block days
how to find the story points and Flagged custom-field?
Image 3-14,devTool-network-part
Image 3-15,card-history
Image 3-16,find-custom-field-api
Image 3-17,story-point-custom-field
Image 3-18,flagged-custom-field
Image 3-19,Settings for Pipeline
They are sharing the similar settings which you need to specify the pipeline step so that Heartbeat will know in which pipeline and step, team consider it as deploy to PROD. So that we could use it to calculate metrics.
| Items | Description | | ------------- --|----------------------------------------------------------------- | | Organization | The organization for your pipelines | | Pipeline Name | Your pipeline name | | Steps | The pipeline step that consider as deploy to PROD || Branches | Your selected branches |
When user first use this tool, need to create a project, and do some config. To avoid the user entering configuration information repeatedly every time, we provide a “Save” button in the config and metrics pages. In config page, click the save button, it will save all items in config page in a Json file. If you click the save button in the metrics page, it will save all items in config and metrics settings in a Json file. Here is the json file (Image 3-16)。Note: Below screenshot just contains a part of data.
Image 3-20, Config Json file
When user already saved config file before, then you don’t need to create a new project. In the home page, can click Import Project from File button(Image 3-1) to select the config file. If your config file is too old, and the tool already have some new feature change, then if you import the config file, it will get some warning info(Image 3-17). You need to re-select some info, then go to the next page.
Image 3-21, Warning message
After setup and configuration, then it will generate the heartbeat dashboard. Image 3-22, Report page
You could find the drill down from show more >
link from dashboard.
In Velocity Report, it will list the corresponding data by Story Point and the number of story tickets. (image 3-19)
Velocity
: includes how many story points and cards we have completed within selected time period.
Image 3-23,Velocity Report
The calculation process data and final result of Cycle Time are calculated by rounding method, and two digits are kept after the decimal point. Such as: 3.567... Is 3.56; 3.564... Is 3.56.
Cycle time
: the time it take for each card start ‘to do’ until move to ‘done’.
Image 3-24,Cycle Time Report
It will show the classification data of Board based on your selection on Classification Settings
in metrics page.
The percentage value represent the count of that type tickets vs total count of tickets.
Classification
: provide different dimensions to view how much efforts team spent within selected time period.
Image 3-25,Classification Report
It will show the rework data of board on your selection on Rework times settins
in metrics page (image 3-21).
If "to do" is selected in the "Rework to which column", we will count the number of times the subsequent options in the options are reworked back to the "to do" state.
Image 3-26,Rework Report
Formula for ‘PR lead time':
Formula for ‘Pipeline lead time':
Image 3-29,Lead time for changes Report
Image 3-30,Dev Change Failure Rate Report
_Image 3-31,mean time to recovery
After generating the report, you can export the original data for your board and pipeline (Image 3-18). Users can click the “Export board data” or “Export pipeline data” button to export the original data.
It will export a csv file for board data
Export the all done tickets during the time period(Image 3-18)
Export the latest updated 50 non-done tickets in your current active board. And it will order by heartbeat state and then last status change date(Image 3-28)
Image 3-32,Exported Board Data
All columns for Jira board:
Column name | Description |
---|---|
Issue key | Ticket ID |
Summary | -- |
Issue Type | -- |
Status | -- |
Story Point | -- |
Assignee | -- |
Reporter | -- |
Project Key | -- |
Project Name | -- |
Priority | -- |
Parent Summary | The epic for ticket |
Sprint | Which sprint this ticket in |
Labels | -- |
Cycle Time | total Cycle Time |
Cycle Time / Story Points | Cycle Time for each point |
Analysis Days | Analysis days for each ticket |
In Dev Days | Development days for each ticket |
Waiting Days | After development, how long will take before testing |
Testing Days | Testing days for each ticket |
Block Days | Blocked days for each ticket |
Review Days | -- |
Original Cycle Time: {Column Name} | The data for Jira board original data |
Rework: total - {rework state} | The total number of rework times |
Rework: from {subsequent status} | The number of rework times |
It will export a csv file for pipeline data (image 3-29).
Image 3-33,Exported Pipeline Data
All columns for pipeline data:
Column name | Description |
---|---|
Pipeline Name | -- |
Pipeline Step | Step name |
Committer | -- |
Code Committed Time | Committed time |
PR Created Time | -- |
PR Merged Time | -- |
Deployment Completed Time | When it finished deploy |
Total Lead Time (mins) | -- |
PR lead time (mins) | -- |
Pipeline lead time (mins) | -- |
Status | Status for pipeline (Pass or Failed) |
In HeartBeat tool design, we have a cache setting for verify jira & pipeLine & gitHub config function and pipleLine loading function and generate report function.
For Jira/Buildkite/Github data
: TTL for cache -> 90 secondsFor holiday data
:TTL for cache -> 5 minutesAs an administrator of the jira board, if you modify the workflow to change the status name, it will affect the calculation of duration for cards in that status. Considering the potential loss of duration, changing the status name can lead to loss of precision in cycle time calculation for related cards.
For Classic Jira users, before you use this tool, you need to do some settings for the jira board. Otherwise, you cannot get the data. Here are the steps you need to do:
Open https://user-images.githubusercontent.com/995849/89785230-a75b5700-db4c-11ea-9ce2-4ff7894bbf25.pnghttps://user-images.githubusercontent.com/995849/89785230-a75b5700-db4c-11ea-9ce2-4ff7894bbf25.png)
Image 5-1
You need to enable any items you want to know. In the above page, If you want to change any items' screens, you can click the screens link in the actions column for that item. Then in the next page, check the project you want to change, and update it. Like: Story points
Image 5-2
Image 5-3
For the next-gen Jira, when you add story points item, the name should be Story Points or Story point estimate.
For now, we just can download the code in our local machine, please follow below steps:
cd HearBeat/frontend
pnpm install
pnpm start
pnpm build
pnpm preview
pnpm test
pnpm coverage
cd HearBeat/backend
./gradlew bootRun --args='--spring.profiles.active=local'
cd HearBeat/frontend
pnpm start
cd HearBeat/frontend
pnpm run e2e:headed
Refer to run backend
Add [infra]
tag to the title of the commit message or PR to trigger infra-related deployments.
Add [backend]
tag to the title of the commit message or PR to trigger backend-related deployments.
Add [frontend]
tag to the title of the commit message or PR to trigger frontend-related deployments.
Add [docs]
tag to the title of the commit message or PR to trigger docs-related deployments.
Release version follows Software release life cycle
git tag {tag name}
git push origin {tag name}
# Delete tag
git tag -d {tag name}
git push origin :refs/tags/{tag name}
First, create a docker-compose.yml
file, and copy below code into the file.
version: "3.4"
services:
backend:
image: ghcr.io/au-heartbeat/heartbeat_backend:latest
container_name: backend
ports:
- 4322:4322
restart: always
frontend:
image: ghcr.io/au-heartbeat/heartbeat_frontend:latest
container_name: frontend
ports:
- 4321:80
depends_on:
- backend
restart: always
Then, execute this command
docker-compose up -d frontend
Specifically, story point field can be indicated in docker-compose.yml
. You can do it as below.
version: "3.4"
services:
backend:
image: ghcr.io/au-heartbeat/heartbeat_backend:latest
container_name: backend
ports:
- 4322:4322
restart: always
environment:
STORY_POINT_KEY: customfield_10061
frontend:
image: ghcr.io/au-heartbeat/heartbeat_frontend:latest
container_name: frontend
ports:
- 4321:80
depends_on:
- backend
restart: always
Specifically, if you want to run with multiple instances. You can do it with below docker compose file.
You can change deploy.replicas
to adjust the number of instances.
version: "3.4"
services:
backend:
image: ghcr.io/au-heartbeat/heartbeat_backend:latest
expose:
- 4322
deploy:
replicas: 3
restart: always
volumes:
- file_volume:/app/output
frontend:
image: ghcr.io/au-heartbeat/heartbeat_frontend:latest
container_name: frontend
ports:
- 4321:80
depends_on:
- backend
restart: always
volumes:
file_volume:
First, create a k8s-heartbeat.yml
file, and copy below code into the file.
apiVersion: apps/v1
kind: Deployment
metadata:
name: backend
spec:
selector:
matchLabels:
app: backend
template:
metadata:
labels:
app: backend
spec:
containers:
- name: backend
image: ghcr.io/au-heartbeat/heartbeat_backend:latest
---
apiVersion: v1
kind: Service
metadata:
name: backend
spec:
selector:
app: backend
ports:
- protocol: TCP
port: 4322
targetPort: 4322
type: LoadBalancer
---
apiVersion: apps/v1
kind: Deployment
metadata:
name: frontend
spec:
selector:
matchLabels:
app: frontend
template:
metadata:
labels:
app: frontend
spec:
containers:
- name: frontend
image: ghcr.io/au-heartbeat/heartbeat_frontend:latest
---
apiVersion: v1
kind: Service
metadata:
name: **frontend**
spec:
selector:
app: frontend
ports:
- protocol: TCP
port: 4321
targetPort: 80
type: LoadBalancer
Then, execute this command
kubectl apply -f k8s-heartbeat.yml
You also can deploy Heartbeats in multiple instances using K8S through the following documentation.
We love your input! Please see our contributing guide to get started. Thank you 🙏 to all our contributors!
Now, Heartbeat uses GitHub Actions
and BuildKite
to build and deploy Heartbeat application.
But there is some constrains, like some pipeline dependency.
So, committer should pay attention to this flow when there is some pipeline issues.
sequenceDiagram
actor Committer
participant GitHub_Actions as GitHub Actions
participant BuildKite
Committer ->> GitHub_Actions : Push code
Committer ->> BuildKite : Push code
loop 30s/40 times
BuildKite->> GitHub_Actions: Check the basic check(all check before 'deploy-infra' job) has been passed
GitHub_Actions -->> BuildKite: Basic check has passed?
alt Yes
BuildKite ->> BuildKite: Build and deploy e2e env
Note over BuildKite, GitHub_Actions: Some times passed
loop 30s/60 times
GitHub_Actions ->> BuildKite: Request to check if the e2e has been deployed
BuildKite -->> GitHub_Actions: e2e deployment status, if the e2e has been deployed?
alt Yes
GitHub_Actions ->> GitHub_Actions: Run e2e check on GitHub actions
Note over BuildKite, GitHub_Actions: Some times passed
GitHub_Actions -->> Committer: Response the pipeline result to committer
BuildKite -->> Committer: Response the pipeline result to committer
else No
GitHub_Actions -->> Committer: Break the pipeline
end
end
else No
BuildKite -->> Committer: Break the pipeline
end
end