Heads Up Display for use with Stratux. Designed for reflective HUD screens, intended for traffic call outs.
Initial release of Version 2!
This has been flight tested and stable.
Full Changelog: https://github.com/JohnMarzulli/StratuxHud/compare/V1.7.0...V2.0.0
Fixes a few issues with positional breadcrumbs.
https://www.dropbox.com/s/gzwbky9ytu60aip/stratuxhud_v2_pi4_alpha_2_shrunk.img.gz?dl=0
Preview release of V2!
Besides the many bug fixes and performance improvements, this also includes fully redesigned visuals.
There is a new view called "Top Down Scope".
This release is only for
Dynon 180 support is included.
Includes new ground speed tracking and tracing
Includes many bug fixes and perf improvements over the first Alpha.
https://www.dropbox.com/s/gzwbky9ytu60aip/stratuxhud_v2_pi4_alpha_2_shrunk.img.gz?dl=0
Addresses some issues with AHRS data becoming expired too soon during heavy loads.
This is the biggest release since first release in July 2018!
Included in this build:
With V1.6, the code that was handling communication with the Stratux has been moved into a separate service.
This new Traffic Manager service is written in TypeScript and runs on NodeJS
By doing this, the reliability of the connection between the HUD and the Stratux for traffic reports has been drastically improved.
This move also raises the HUD's framerate from 15FPS to near 30FPS when run as an "All-In-One" unit on the Stratux.
These are self-contained image files. Use Balena Etcher or another image tool to place them on an 8GB micro-SD card.
Then use the HudConfig tool while the StratuxHud is running to set your declination.
No further configuration is required.
NOTES:
File | Targets | Roles |
---|---|---|
StratuxHud_1.6_pi3series_HDMI_and_composite.zip | Pi 3, Pi 3B+ | HUD Software only. Requires a Stratux |
StratuxHud_1.6_AIO_pi3series_HDMI_and_composite.zip | Pi3 Only | HUD + Stratux on a single unit |
Initial release as an image.
Includes:
These are self-contained image files. Use Balena Etcher or another image tool to place them on an 8GB micro-SD card.
Then use the HudConfig tool while the StratuxHud is running to set your declination.
No further configuration is required.
NOTES:
File | Targets | Roles |
---|---|---|
StratuxHud_1.5_pi3series_HDMI_and_composite.zip | Pi 3, Pi 3B+ | HUD Software only. |
StratuxHud_1.5_pi4b_HDMI.zip | Pi 4B only | HUD Software only. |
StratuxHud_1.5_AIO_pi3series_HDMI_and_composite.zip | Pi3 Only | HUD + Stratux |