Staxrip Versions Save

[!TIP] If you want to support StaxRip and keep it alive:

Join our community on Discord for help, talks, polls, information about oncoming releases, etc.

[!NOTE] This is "just" an extension for StaxRip v2.38.0. If you have already downloaded or running v2.38.x, you just need to download and replace the (extracted) StaxRip.exe file from the EXE-ONLY archive.. Please check out the Changelog for more information, especially in case you have skipped a version.

[!IMPORTANT] Starting with v2.38.1 macros for directory names or paths are not including a \ at the end anymore.. This means you might have to adjust your scripts when coming from v2.38.0! You can also check out #1329 for more information. Also replacing v2.38.0's StaxRip.exe only lets StaxRip ask you for the Settings folder like on a clean start. This is okay when updating from v2.38.0 and just happens once. Just select the folder you already use and you're fine.

Changelog:

v2.38.7 (2024-05-02)

• UI: Fix import and setting of encoder parameters
• VapourSynth: Fix potential wrong loading order of Python scripts
• Internal: Small fixes, improvements, changes
• Internal: Fix crash using Auto Crop on extremely short videos with Dolby Vision (#1327)
• Internal: Fix ignoring of existing Dolby Vision metadata in temp folder
• Internal: Fix Linux compatibility a bit more (#1331)

v2.38.6 (2024-04-26)

• Log: Extend logging for Dolby Vision metadata files
• UI: Show TaskDialog timeout when set
• UI: Fix AutoCrop not working properly on videos with multiple aspect ratios (#1324)
• Internal: Fix Linux compatibility a bit more (#1326, #1329)

v2.38.5 (2024-04-25)

• UI: Adjust StaxRip Update Check to perform cascade-like
  • More frequent checks on new versions, less frequent checks the older the version gets
• Internal: Fix Linux compatibility with macros and path handling

v2.38.4 (2024-04-25)

• UI: Extend max number of frames used for auto-crop (#1324)
• Internal: Fix Linux compatibility that caused issues with macros

v2.38.3 (2024-04-24)

• Internal: Fix Linux compatibility that caused Blu-ray folders not being found anymore

v2.38.2 (2024-04-24)

• UI: Load new Startup Template when changed in Settings (#1229)
• UI: Improve Error Messages
• UI: Make Frame Mismatch more robust towards wrong script information (#1315, #1322)
• UI: Fix not or delayed updating target parameters (#1315, #1322, #1323)
• FFmpeg: Fix output file extensions when using some codecs
• NVEncC: Fix "--vmaf" parameter usage
• NVEncC: Fix "--tune" parameter
• NVEncC: Bring back "--lossless" and "--lowlatency" parameters as they are not covered by new "--tune" modes
• SvtAv1EncApp: Extend SVT-AV1-PSY-Support

v2.38.1 (not published)

• Internal: Bring "Improve Linux compatibility" into master (thanks to @Valdiralita (#852))

$~$

[!TIP] If you want to support StaxRip and keep it alive:

Join our community on Discord for help, talks, polls, information about oncoming releases, etc.

[!NOTE] This is "just" an extension for StaxRip v2.38.0. If you have already downloaded or running v2.38.x, you just need to download and replace the (extracted) StaxRip.exe file from the EXE-ONLY archive.. Please check out the Changelog for more information, especially in case you have skipped a version.

[!IMPORTANT] As some of you might found out already, when updating from v2.38.0 to a later version, macros for directory names or paths are not including a \ anymore. This means you have to adjust your scripts! You can also check out #1329 for more information. Also replacing v2.38.0's StaxRip.exe only lets StaxRip ask you for the Settings folder like on a clean start. This is okay when updating from v2.38.0 and won't happen anymore. Just select the folder you already use and you're fine. Sorry for not mentioning that before.

Changelog:

v2.38.6 (2024-04-26)

• Log: Extend logging for Dolby Vision metadata files
• UI: Show TaskDialog timeout when set
• UI: Fix AutoCrop not working properly on videos with multiple aspect ratios (#1324)
• Internal: Fix Linux compatibility a bit more (#1326, #1329)

v2.38.5 (2024-04-25)

• UI: Adjust StaxRip Update Check to perform cascade-like
  • More frequent checks on new versions, less frequent checks the older the version gets
• Internal: Fix Linux compatibility with macros and path handling

v2.38.4 (2024-04-25)

• UI: Extend max number of frames used for auto-crop (#1324)
• Internal: Fix Linux compatibility that caused issues with macros

v2.38.3 (2024-04-24)

• Internal: Fix Linux compatibility that caused Blu-ray folders not being found anymore

v2.38.2 (2024-04-24)

• UI: Load new Startup Template when changed in Settings (#1229)
• UI: Improve Error Messages
• UI: Make Frame Mismatch more robust towards wrong script information (#1315, #1322)
• UI: Fix not or delayed updating target parameters (#1315, #1322, #1323)
• FFmpeg: Fix output file extensions when using some codecs
• NVEncC: Fix "--vmaf" parameter usage
• NVEncC: Fix "--tune" parameter
• NVEncC: Bring back "--lossless" and "--lowlatency" parameters as they are not covered by new "--tune" modes
• SvtAv1EncApp: Extend SVT-AV1-PSY-Support

v2.38.1 (not published)

• Internal: Bring "Improve Linux compatibility" into master (thanks to @Valdiralita (#852))

$~$

[!TIP] If you want to support StaxRip and keep it alive:

Join our community on Discord for help, talks, polls, information about oncoming releases, etc.

[!NOTE] This is "just" an extension for StaxRip v2.38.0. If you have already downloaded or running v2.38.x, you just need to download and replace the (extracted) StaxRip.exe file from the EXE-ONLY archive.. Please check out the Changelog for more information, especially in case you have skipped a version.

Changelog:

v2.38.5 (2024-04-25)

• UI: Adjust StaxRip Update Check to perform cascade-like
  • More frequent checks on new versions, less frequent checks the older the version gets
• Internal: Fix Linux compatibility with macros and path handling

v2.38.4 (2024-04-25)

• UI: Extend max number of frames used for auto-crop (#1324)
• Internal: Fix Linux compatibility that caused issues with macros

v2.38.3 (2024-04-24)

• Internal: Fix Linux compatibility that caused Blu-ray folders not being found anymore

v2.38.2 (2024-04-24)

• UI: Load new Startup Template when changed in Settings (#1229)
• UI: Improve Error Messages
• UI: Make Frame Mismatch more robust towards wrong script information (#1315, #1322)
• UI: Fix not or delayed updating target parameters (#1315, #1322, #1323)
• FFmpeg: Fix output file extensions when using some codecs
• NVEncC: Fix "--vmaf" parameter usage
• NVEncC: Fix "--tune" parameter
• NVEncC: Bring back "--lossless" and "--lowlatency" parameters as they are not covered by new "--tune" modes
• SvtAv1EncApp: Extend SVT-AV1-PSY-Support

v2.38.1 (not published)

• Internal: Bring "Improve Linux compatibility" into master (thanks to @Valdiralita (#852))

$~$

[!TIP] If you want to support StaxRip and keep it alive:

Join our community on Discord for help, talks, polls, information about oncoming releases, etc.

[!NOTE] This is "just" an extension for StaxRip v2.38.0. If you have already downloaded or running v2.38.x, you just need to download and replace the (extracted) StaxRip.exe file from the EXE-ONLY archive.. Please check out the Changelog for more information, especially in case you have skipped a version.

Changelog:

v2.38.4 (2024-04-25)

• UI: Extend max number of frames used for auto-crop (#1324)
• Internal: Fix Linux compatibility that caused issues with macros

v2.38.3 (2024-04-24)

• Internal: Fix Linux compatibility that caused Blu-ray folders not being found anymore

v2.38.2 (2024-04-24)

• UI: Load new Startup Template when changed in Settings (#1229)
• UI: Improve Error Messages
• UI: Make Frame Mismatch more robust towards wrong script information (#1315, #1322)
• UI: Fix not or delayed updating target parameters (#1315, #1322, #1323)
• FFmpeg: Fix output file extensions when using some codecs
• NVEncC: Fix "--vmaf" parameter usage
• NVEncC: Fix "--tune" parameter
• NVEncC: Bring back "--lossless" and "--lowlatency" parameters as they are not covered by new "--tune" modes
• SvtAv1EncApp: Extend SVT-AV1-PSY-Support

v2.38.1 (not published)

• Internal: Bring "Improve Linux compatibility" into master (thanks to @Valdiralita (#852))

$~$

[!TIP] If you want to support StaxRip and keep it alive:

Join our community on Discord for help, talks, polls, information about oncoming releases, etc.

[!NOTE] This is "just" an extension for StaxRip v2.38.0. If you have already downloaded or running v2.38.x, you just need to download and replace the (extracted) StaxRip.exe file from the EXE-ONLY archive.. Please check out the Changelog for more information, especially in case you have skipped a version.

Changelog:

v2.38.3 (2024-04-24)

• Internal: Fix Linux compatibility that caused Blu-ray folders not being found anymore

v2.38.2 (2024-04-24)

• UI: Load new Startup Template when changed in Settings (#1229)
• UI: Improve Error Messages
• UI: Make Frame Mismatch more robust towards wrong script information (#1315, #1322)
• UI: Fix not or delayed updating target parameters (#1315, #1322, #1323)
• FFmpeg: Fix output file extensions when using some codecs
• NVEncC: Fix "--vmaf" parameter usage
• NVEncC: Fix "--tune" parameter
• NVEncC: Bring back "--lossless" and "--lowlatency" parameters as they are not covered by new "--tune" modes
• SvtAv1EncApp: Extend SVT-AV1-PSY-Support

v2.38.1 (not published)

• Internal: Bring "Improve Linux compatibility" into master (thanks to @Valdiralita (#852))

$~$

[!TIP] If you want to support StaxRip and keep it alive:

Join our community on Discord for help, talks, polls, information about oncoming releases, etc.

[!NOTE] This is "just" an extension for StaxRip v2.38.0. If you have already downloaded or running v2.38.x, you just need to download and replace the (extracted) StaxRip.exe file from the EXE-ONLY archive.. Please check out the Changelog for more information, especially in case you have skipped a version.

Changelog:

• UI: Load new Startup Template when changed in Settings (#1229)
• UI: Improve Error Messages
• UI: Make Frame Mismatch more robust towards wrong script information (#1315, #1322)
• UI: Fix not or delayed updating target parameters (#1315, #1322, #1323)
• FFmpeg: Fix output file extensions when using some codecs
• NVEncC: Fix "--vmaf" parameter usage
• NVEncC: Fix "--tune" parameter
• NVEncC: Bring back "--lossless" and "--lowlatency" parameters as they are not covered by new "--tune" modes
• SvtAv1EncApp: Extend SVT-AV1-PSY-Support

$~$

[!TIP] If you want to support StaxRip and keep it alive:

Join our community on Discord for help, talks, information about oncoming releases, polls, etc.

[!IMPORTANT] I highly recommend starting off with fresh/new setting and not to use the ones from a previous version - you might miss some new features.

Special thanks to the Donators and Contributors who support this project and are also responsible for this release. I really appreciate you! ❤️

Changelog:

• UI: Add "Changelog" to Main Menu
• UI: Add "Discord Server" to Main Menu
• UI: Add "Exit" to Main Menu
• UI: Add "Launch new instance" to Main Menu
• UI: Add "Report an issue" to Main Menu
• UI: Add "Support" to Main Menu
• UI: Add "What's new" to Main Menu
• UI: Rearrange Project in Main Menu
• UI: Rearrange Encoder Profiles
• UI: Move temp file deletion from Settings to Options
• UI: Add options to separate temp file deletion based on file types (#1236)
• UI: Improve memory usage
• UI: Improve performance with script handling, Assistant, Preview, Code Editor and interface
• UI: Improve script update performance (thanks to @Valdiralita (#1262))
• UI: Show Preview Info by default
• UI: Make Preview a normal window by default
• UI: Add "Output Mod Direction" to allow decreasing when auto cropping or correcting is applied (#1285)
• UI: Fix Saving of jobs on network shares (#1308)
• UI: Fix Import Command Line for checkboxed parameters
• UI: Output Highlighting for Pipe symbol
• UI: Add Plugin fulfillment requirements
  • If a requirement is not fulfilled, the import will be commented out
• UI: Shorten "What's new" report if needed
• UI: Remove Update question at first start
  • Update Check is enabled by default and can be disabled in the Settings
  • According to the poll on Discord
• NVEncC: Add new --lookahead-level parameter
• NVEncC: Add new --tf-level parameter
• NVEncC: Add new --tune parameter
• SvtAv1EncApp: Add SVT-AV1-PSY Support
• Update tools
  • AOMEnc v3.8.2-397-ga4420e55a8-x64-msvc1937
  • DoVi_Tool v2.1.1
  • eac3to v3.51
  • MediaInfo v24.03
  • Mp4Box v2.3-DEV-rev1042-g7a3eca90b-x64-msvc1937
  • NVEncC v7.50
  • qaac v2.82
  • rav1e v0.7.0-(p20240409)-x64-gcc13.2.0
  • Subtitle Edit v4.0.5
  • SvtAv1EncApp v2.0.0-7+6-62325458-.Mod-by-Patman.-x64-msvc1937
  • x264 v0.164.3190+7-f54976d-.Mod-by-Patman.-x64-gcc13.2.0
  • x265 v3.6+2+13-9a3dac6e5-.Mod-by-Patman.-x64-avx2-msvc1937
• Update Dual plugins
  • BestSource R2-RC4
  • L-SMASH-Works v1194
• Update VapourSynth plugins
  • mvsfunc v11 [865c748 / 2023]
  • SubText R5

[!TIP] If you want to support StaxRip and keep it alive:

Join our community on Discord for help, talks, information about oncoming releases, polls, etc.

[!NOTE] This is "just" an extension for StaxRip v2.37.0. If you have already downloaded or running v2.37.x, you just need to download and replace the (extracted) StaxRip.exe file from the EXE-ONLY archive..

Changelog:

v2.37.6 (2024-04-12)

• UI: Add Progress for dovi_tool and hdr10plus_tool
• UI: Adjust Progress Reformatting for SvtAv1EncApp
• UI: Improve saving of Jobs List to avoid data loss on full disk
• VapourSynth: Fix missing loading of SubText for hardcoded subtitles (#1307)

v2.37.5 (2024-04-06)

• UI: Fix asking for Project saving on Templates
• UI: Optimize ignorable Output Mod warning (#1285)
• SvtAv1EncApp: Update settings and parameters to v2.0.0 (#1273)
• vvencFFapp: Fix display for Compression Check Run (#1284)

v2.37.4 (2024-03-28)

• UI: Trigger event "While Processing" more often, but also time limited
• UI: Make timeout for error messages on job processing optional
• UI: Convert tabs to spaces on Processing window for better looking output (#1243)
• UI: Fix not asking for Project saving when dropping file under some circumstances
• UI: Make Output Mod warning ignorable (#1285)

v2.37.3 (2024-03-23)

• UI: Fix tonemapping for HDR videos for Crop window not working under some circumstances
• UI: Set Process Priority from "Idle" to "Below Normal"
• NVEncC: Fix wrong parameter settings for "--vpp-nvvfx-denoise" and "--vpp-nvvfx-artifact-reduction" (#1283)

v2.37.2 (2024-03-22)

• UI: Extend Crop window with Time information (#1274)
• UI: Update and extend Show Changelog
• UI: Update and adjust Updater

v2.37.1 (2024-03-18)

• UI: Fix crash on AutoCrop selection in Options on Templates (#1276)

v2.37.0 (2024-03-17)

• UI: Enhance Auto Crop for Dolby Vision sources
• UI: Improve handling with Dolby Vision videos and manual cropping
• UI: Re-read modified Dolby Vision metadata automatically on window focus
• UI: Improve Dolby Vision metadata handling
• UI: Enhance "Frame Mismatch" error message
• UI: Let "Frame Mismatch" ignore cutted "Copy/Mux" runs (#1234)
• UI: Write "Media Info Source File" only if it has changed (#1221)
• UI: Take given HDR10+/DolbyVision metadata into account when calculate target size/bitrate (#1254)
• UI: Fix rounding issue with number edits when using mouse wheel (#1253)
• UI: Fix rare crash on Audio and Muxer window opening
• FFmpeg: Add "-hwaccel cuda" to command line when NVIDIA decoder is selected (#1260)
• NVEncC: Rearrange some parameters (#1240)
• NVEncC: Enable Dolby Vision only when H265 is selected (#1261)
• NVEncC: Add "--vpp-nvvfx-artifact-reduction" parameter (#1240)
• NVEncC: Add "--vpp-nvvfx-denoise" parameter (#1240)
• NVEncC: Fix "--vpp-resize" parameter setting for "nvvfx-superres"
• QSVEncC: Enable Dolby Vision only when H265 is selected
• SvtAv1EncApp: Fix Passes could also affect Quality mode (#1267)
• VCEEncC: Add "--vpp-denoise-dct" parameter
• VCEEncC: Fix problem with missing space before parameter call
• VCEEncC: Remove Dolby Vision support
• x265: Add "--auto-aq" parameter (#1241)
• Update tools
  • DeeZy v0.1.8
  • eac3to v3.50
  • MKVToolNix v83.0
  • MP4Box v2.3-DEV-rev975-ge50da0656-x64-msvc1937
  • NVEncC v7.46
  • Python v3.12.2
  • QSVEncC v7.62
  • rav1e v0.7.0-(p20240312)-x64-gcc13.2.0
  • Subtitle Edit v4.0.4
  • SvtAv1EncApp v2.0.0-1+3-58b1b010-.Mod-by-Patman.-x64-msvc1937
  • VapourSynth R66
  • VCEEncC v8.22
  • vvencFFapp v1.11.1
  • x264 v0.164.3186+8-53164ba-.Mod-by-Patman.-x64-gcc13.2.0
  • x265 v3.5+156+14-df2e4c31e-.Mod-by-Patman.-x64-avx2-msvc1937
• Update AviSynth+ plugins
  • eedi3_resize16 v3.3.16
  • JPSDR v3.3.5 (W7 AVX2)
  • TIVTC v1.0.29
• Update Dual plugins
  • ffms2 v5.0 RC3
  • L-SMASH-Works v1183 [20240317]
• Update VapourSynth plugins
  • HQDN3D v1.00 mod

[!TIP] If you want to support StaxRip and keep it alive:

Join our community on Discord for help, talks, information about oncoming releases, polls, etc.

[!NOTE] This is "just" an extension for StaxRip v2.37.0. If you have already downloaded or running v2.37.x, you just need to download and replace the (extracted) StaxRip.exe file.

[!IMPORTANT] This update will destroy your existing SvtAv1EncApp profiles. You have to take care and re-set them! Be aware that this is also valid for existing jobs!

Changelog:

v2.37.5 (2024-04-06)

• UI: Fix asking for Project saving on Templates
• UI: Optimize ignorable Output Mod warning (#1285)
• SvtAv1EncApp: Update settings and parameters to v2.0.0 (#1273)
• vvencFFapp: Fix display for Compression Check Run (#1284)

v2.37.4 (2024-03-28)

• UI: Trigger event "While Processing" more often, but also time limited
• UI: Make timeout for error messages on job processing optional
• UI: Convert tabs to spaces on Processing window for better looking output (#1243)
• UI: Fix not asking for Project saving when dropping file under some circumstances
• UI: Make Output Mod warning ignorable (#1285)

v2.37.3 (2024-03-23)

• UI: Fix tonemapping for HDR videos for Crop window not working under some circumstances
• UI: Set Process Priority from "Idle" to "Below Normal"
• NVEncC: Fix wrong parameter settings for "--vpp-nvvfx-denoise" and "--vpp-nvvfx-artifact-reduction" (#1283)

v2.37.2 (2024-03-22)

• UI: Extend Crop window with Time information (#1274)
• UI: Update and extend Show Changelog
• UI: Update and adjust Updater

v2.37.1 (2024-03-18)

• UI: Fix crash on AutoCrop selection in Options on Templates (#1276)

v2.37.0 (2024-03-17)

• UI: Enhance Auto Crop for Dolby Vision sources
• UI: Improve handling with Dolby Vision videos and manual cropping
• UI: Re-read modified Dolby Vision metadata automatically on window focus
• UI: Improve Dolby Vision metadata handling
• UI: Enhance "Frame Mismatch" error message
• UI: Let "Frame Mismatch" ignore cutted "Copy/Mux" runs (#1234)
• UI: Write "Media Info Source File" only if it has changed (#1221)
• UI: Take given HDR10+/DolbyVision metadata into account when calculate target size/bitrate (#1254)
• UI: Fix rounding issue with number edits when using mouse wheel (#1253)
• UI: Fix rare crash on Audio and Muxer window opening
• FFmpeg: Add "-hwaccel cuda" to command line when NVIDIA decoder is selected (#1260)
• NVEncC: Rearrange some parameters (#1240)
• NVEncC: Enable Dolby Vision only when H265 is selected (#1261)
• NVEncC: Add "--vpp-nvvfx-artifact-reduction" parameter (#1240)
• NVEncC: Add "--vpp-nvvfx-denoise" parameter (#1240)
• NVEncC: Fix "--vpp-resize" parameter setting for "nvvfx-superres"
• QSVEncC: Enable Dolby Vision only when H265 is selected
• SvtAv1EncApp: Fix Passes could also affect Quality mode (#1267)
• VCEEncC: Add "--vpp-denoise-dct" parameter
• VCEEncC: Fix problem with missing space before parameter call
• VCEEncC: Remove Dolby Vision support
• x265: Add "--auto-aq" parameter (#1241)
• Update tools
  • DeeZy v0.1.8
  • eac3to v3.50
  • MKVToolNix v83.0
  • MP4Box v2.3-DEV-rev975-ge50da0656-x64-msvc1937
  • NVEncC v7.46
  • Python v3.12.2
  • QSVEncC v7.62
  • rav1e v0.7.0-(p20240312)-x64-gcc13.2.0
  • Subtitle Edit v4.0.4
  • SvtAv1EncApp v2.0.0-1+3-58b1b010-.Mod-by-Patman.-x64-msvc1937
  • VapourSynth R66
  • VCEEncC v8.22
  • vvencFFapp v1.11.1
  • x264 v0.164.3186+8-53164ba-.Mod-by-Patman.-x64-gcc13.2.0
  • x265 v3.5+156+14-df2e4c31e-.Mod-by-Patman.-x64-avx2-msvc1937
• Update AviSynth+ plugins
  • eedi3_resize16 v3.3.16
  • JPSDR v3.3.5 (W7 AVX2)
  • TIVTC v1.0.29
• Update Dual plugins
  • ffms2 v5.0 RC3
  • L-SMASH-Works v1183 [20240317]
• Update VapourSynth plugins
  • HQDN3D v1.00 mod

[!TIP] If you want to support StaxRip and keep it alive:

Join our community on Discord for help, talks, information about oncoming releases, polls, etc.

[!NOTE] This is "just" an extension for StaxRip v2.37.0. If you have already downloaded or running v2.37.x, you just need to download and replace the (extracted) StaxRip.exe file.

Changelog:

v2.37.4 (2024-03-28)

• UI: Trigger event "While Processing" more often, but also time limited
• UI: Make timeout for error messages on job processing optional
• UI: Convert tabs to spaces on Processing window for better looking output (#1243)
• UI: Fix not asking for Project saving when dropping file under some circumstances
• UI: Make Output Mod warning ignorable (#1285)

v2.37.3 (2024-03-23)

• UI: Fix tonemapping for HDR videos for Crop window not working under some circumstances
• UI: Set Process Priority from "Idle" to "Below Normal"
• NVEncC: Fix wrong parameter settings for "--vpp-nvvfx-denoise" and "--vpp-nvvfx-artifact-reduction" (#1283)

v2.37.2 (2024-03-22)

• UI: Extend Crop window with Time information (#1274)
• UI: Update and extend Show Changelog
• UI: Update and adjust Updater

v2.37.1 (2024-03-18)

• UI: Fix crash on AutoCrop selection in Options on Templates (#1276)

v2.37.0 (2024-03-17)

• UI: Enhance Auto Crop for Dolby Vision sources
• UI: Improve handling with Dolby Vision videos and manual cropping
• UI: Re-read modified Dolby Vision metadata automatically on window focus
• UI: Improve Dolby Vision metadata handling
• UI: Enhance "Frame Mismatch" error message
• UI: Let "Frame Mismatch" ignore cutted "Copy/Mux" runs (#1234)
• UI: Write "Media Info Source File" only if it has changed (#1221)
• UI: Take given HDR10+/DolbyVision metadata into account when calculate target size/bitrate (#1254)
• UI: Fix rounding issue with number edits when using mouse wheel (#1253)
• UI: Fix rare crash on Audio and Muxer window opening
• FFmpeg: Add "-hwaccel cuda" to command line when NVIDIA decoder is selected (#1260)
• NVEncC: Rearrange some parameters (#1240)
• NVEncC: Enable Dolby Vision only when H265 is selected (#1261)
• NVEncC: Add "--vpp-nvvfx-artifact-reduction" parameter (#1240)
• NVEncC: Add "--vpp-nvvfx-denoise" parameter (#1240)
• NVEncC: Fix "--vpp-resize" parameter setting for "nvvfx-superres"
• QSVEncC: Enable Dolby Vision only when H265 is selected
• SvtAv1EncApp: Fix Passes could also affect Quality mode (#1267)
• VCEEncC: Add "--vpp-denoise-dct" parameter
• VCEEncC: Fix problem with missing space before parameter call
• VCEEncC: Remove Dolby Vision support
• x265: Add "--auto-aq" parameter (#1241)
• Update tools
  • DeeZy v0.1.8
  • eac3to v3.50
  • MKVToolNix v83.0
  • MP4Box v2.3-DEV-rev975-ge50da0656-x64-msvc1937
  • NVEncC v7.46
  • Python v3.12.2
  • QSVEncC v7.62
  • rav1e v0.7.0-(p20240312)-x64-gcc13.2.0
  • Subtitle Edit v4.0.4
  • SvtAv1EncApp v2.0.0-1+3-58b1b010-.Mod-by-Patman.-x64-msvc1937
  • VapourSynth R66
  • VCEEncC v8.22
  • vvencFFapp v1.11.1
  • x264 v0.164.3186+8-53164ba-.Mod-by-Patman.-x64-gcc13.2.0
  • x265 v3.5+156+14-df2e4c31e-.Mod-by-Patman.-x64-avx2-msvc1937
• Update AviSynth+ plugins
  • eedi3_resize16 v3.3.16
  • JPSDR v3.3.5 (W7 AVX2)
  • TIVTC v1.0.29
• Update Dual plugins
  • ffms2 v5.0 RC3
  • L-SMASH-Works v1183 [20240317]
• Update VapourSynth plugins
  • HQDN3D v1.00 mod