Srcery Terminal Save

Terminal configurations

Pregenerated configurations using the Srcery palette. Pick and choose for your favorite terminal emulator, or let us know if yours is missing.

Palette

IMG	TERMCOL	NR	VAR	HEX	RGB	HSL
	black	0	g:srcery_black	#1C1B19	28, 27, 25	40, 6%, 10%
	red	1	g:srcery_red	#EF2F27	239, 47, 39	2, 86%, 55%
	green	2	g:srcery_green	#519F50	81, 159, 80	119, 33%, 47%
	yellow	3	g:srcery_yellow	#FBB829	251, 184, 41	41, 96%, 57%
	blue	4	g:srcery_blue	#2C78BF	44, 120, 191	209, 63%, 46%
	magenta	5	g:srcery_magenta	#E02C6D	224, 44, 109	338, 74%, 53%
	cyan	6	g:srcery_cyan	#0AAEB3	10, 174, 179	182, 89%, 37%
	white	7	g:srcery_white	#BAA67F	186, 166, 127	40, 30%, 61%
	brightblack	8	g:srcery_bright_black	#918175	145, 129, 117	26, 11%, 51%
	brightred	9	g:srcery_bright_red	#F75341	247, 83, 65	6, 92%, 61%
	brightgreen	10	g:srcery_bright_green	#98BC37	152, 188, 55	76, 55%, 48%
	brightyellow	11	g:srcery_bright_yellow	#FED06E	254, 208, 110	41, 99%, 71%
	brightblue	12	g:srcery_bright_blue	#68A8E4	104, 168, 228	209, 70%, 65%
	brightmagenta	13	g:srcery_bright_magenta	#FF5C8F	255, 92, 143	341, 100%, 68%
	brightcyan	14	g:srcery_bright_cyan	#2BE4D0	43, 228, 208	174, 77%, 53%
	brightwhite	15	g:srcery_bright_white	#FCE8C3	252, 232, 195	39, 90%, 88%

Additionally Srcery uses some xterm 256 colors to pad out the color selection, no extra configuration needed.

IMG	NAME	NR	HEX	RGB	HSL
	orange	202	#FF5F00	255, 95, 0	22, 100%, 50%
	bright_orange	208	#FF8700	255, 135, 0	32, 100%, 50%
	hard_black	233	#121212	18, 18, 18	0, 0%, 7%
	teal	30	#008080	0, 128, 128	180, 100%, 25%
	xgray1	235	#262626	38, 38, 38	0, 0%, 15%
	xgray2	236	#303030	48, 48, 48	0, 0%, 19%
	xgray3	237	#3A3A3A	58, 58, 58	0, 0%, 23%
	xgray4	238	#444444	68, 68, 68	0, 0%, 27%
	xgray5	239	#4E4E4E	78, 78, 78	0, 0%, 31%
	xgray6	240	#585858	88, 88, 88	0, 0%, 35%
	xgray7	241	#626262	98, 98, 98	0, 0%, 38%
	xgray8	242	#6C6C6C	108, 108, 108	0, 0%, 42%
	xgray9	243	#767676	118, 118, 118	0, 0%, 46%
	xgray10	244	#808080	128, 128, 128	0, 0%, 50%
	xgray11	245	#8A8A8A	138, 138, 138	0, 0%, 54%
	xgray12	246	#949494	148, 148, 148	0, 0%, 58%

Development

Requirements

Node and npm is required to build the terminal configurations.

Changing readme

README.md along with the configs are generated, edit templates/README.hbs and run make README.md to update docs.

Generating configurations

To get a list of available configurations call make list. By editing the relevant template for any given configuration (located in ./templates) and calling make will generate a new configuration.

To make a single config, say xresources call make like this:

make xresources/srcery.xresources