RPi3 Versions Save

Raspberry Pi 3 UEFI Firmware Images

v1.39

1 year ago

Raspberry Pi 3 UEFI Firmware v1.39

  • This release should fix the rainbow screen issues on reboot when using some SD cards (#17, #24)

v1.38

1 year ago

Raspberry Pi 3 UEFI Firmware v1.38

v1.37

2 years ago

Raspberry Pi 3 UEFI Firmware v1.37

  • Always use non translating DMA in DT mode [tianocore/edk2-platforms@efff29cdcdb77031d8fbbfcee099af388fe1ecf4]
  • Make sure normal memory is not be marked uncached [tianocore/edk2-platforms@af649f800e4dae35beac23a150c50239e526806d]
  • Make sure all drivers are disconnected before reboot [tianocore/edk2-platforms@63d520f9431a6aa4ce1df4387dd0a9831f8a13b8]
  • Fix ACPI MMIO host bridge window attribute [tianocore/edk2-platforms@ab6fcc28fd99ea449d33e47cec7b41c1fbd51351]

v1.36

2 years ago

Raspberry Pi 3 UEFI Firmware v1.36

v1.35

3 years ago

Raspberry Pi 3 UEFI Firmware v1.35

  • Update TF-A binaries to version 2.5 [tianocore/edk2-non-osi@e1bb27fb825bc322df7c91afa57b6336c419ff12]
  • Ensure that ACPI reflects the UART setup from config.txt [tianocore/edk2-platforms@ea709f165df7899d0a9602fc9f65b824baeac490]
  • Enable Bluetooth and UART in Windows OS [tianocore/edk2-platforms@086a3a3ce6c42c859ee5943eb2c4b6edcefdc241]

v1.34

3 years ago

Raspberry Pi 3 UEFI Firmware v1.34

  • Update Cypress WiFi firmware binaries to latest
  • Revert to full device discovery during init by default, and add new "Fast Boot" feature for partial discovery [tianocore/edk2-platforms@efdc159ef7c9f15581a0f63d755a1530ff475156]

v1.33

3 years ago

Raspberry Pi 3 UEFI Firmware v1.33

v1.32

3 years ago

Raspberry Pi 3 UEFI Firmware v1.32

  • Switch back to the old coloured logo [tianocore/edk2-non-osi@3d1bb660664bcacb07bbfaa690e7b2cc35c412f3]
  • Fix cursor appearing on top of logo [tianocore/edk2@b585238d33855fa1ad2ddf83d3fd38d7d48824a1]

v1.31

3 years ago

Raspberry Pi 3 UEFI Firmware v1.31

  • Add CM3 Device Tree binary
  • Add IORT ACPI table [tianocore/edk2-platforms@dac891da5cf326d2b4e9aa5adab1d9320b2dd443]
  • Fix incorrectly mapped 640x480 and 800x600 display resolutions [tianocore/edk2-platforms@38c387d2dac61d64bcf6dd2b9eb416fffa329de4]
  • Update JTAG pinout [tianocore/edk2-platforms@8ef23e848b761b63c719f444e8541ad49ce310d5]

v1.30

3 years ago

Raspberry Pi 3 UEFI Firmware v1.30

  • Internal improvements

NOTE: This firmware archive was altered from the AppVeyor produced version in order to use an older version of start.elf/fixup.dat on account of another regression introduced with raspberrypi/firmware#1445