A TS100 USB-PD replacement PCB.
This release is especially thanks to tuna-f1sh, see this commit for more information..
The Iron will now choose one of the following PD profiles, preferring the highest voltage.
The Display should initiate more reliable.
This release adds current readout and displays the measured current.
It seems that on some OtterIrons this release adds some noise to the measured temperature (+-30°C), if that happens please use v0.3.
Please use v0.5 https://github.com/Jan--Henrik/Otter-Iron/releases/tag/v0.5
This release adds serial communication to the Otter-Iron via USB CDC :3
v0.41 update: added watchdog due to critical overheating bug when USB fails
With this release your TS100 will remember it's set-point, won't overshoot anymore, shows a better DFU-screen and get a nice power-showing-bar! Temperature control is now much more advanced... Much less crappy at least. :3
This release adds a dfu-bootloader (to enter press both buttons while plugging in, display will show "dfu") and a cascade controller (Two-step controller + PID, faster heating and less overshoot). Firmware is still shitty af ^^
dfu-utils usage:
dfu-util -a 0 -s 0x08000000:leave -D firmware.bin
This release adds basic functionality, the firmware however is far from ready. If you flash this release you will be able to set a temperature and solder. Setpoint, current temperature, heating status and input voltage are shown on the display.