This is outdated, not tested and not supported in any case.
The opstools-ansible <https://github.com/larsks/opstools-ansible/>
__
project is a collection of Ansible roles and playbooks that will
configure an environment that provides centralized logging and analysis,
availability monitoring, and performance monitoring.
Before you begin ++++++++++++++++
Before using the opstools-ansible playbook, you will need to deploy one or more servers on which you will install the opstools services. These servers will need to be running either CentOS 7 or RHEL 7 (or a compatible distribution).
These playbooks will install packages from a number of third-party repositories. The opstools-ansible developers are unable to address problems with the third party packaging (other than via working around problems in our playbooks).
Creating an inventory file ++++++++++++++++++++++++++
Create an Ansible inventory file inventory/hosts
that defines your
hosts and maps them to host groups declared in inventory/structure
.
For example:
::
server1 ansible_host=192.0.2.7 ansible_user=centos ansible_become=true
server2 ansible_host=192.0.2.15 ansible_user=centos ansible_become=true
[am_hosts]
server1
[pm_hosts]
server2
[logging_hosts]
server2
There are three high-level groups that can be used to control service placement:
am_hosts
: The playbooks will install availability monitoring
software (Sensu, Uchiwa, and support services) on these hosts.
pm_hosts
: The playbooks will install performance monitoring
software (Gnocchi or graphite)
logging_hosts
: The playbooks will install the centralized logging
stack (Elasticsearch, Kibana, Fluentd) on these hosts.
While there are more groups defined in the inventory/structure
file,
use of those for more granular service placement is neither tested nor
supported at this time.
You can also run post-install playbook after overcloud deployment to finish server side configuration dependent on the information about the overcloud. For that you will need to add undercloud host to the inventory. So for example, after deploying overcloud via tripleo-quickstart tool, you should add something like following to the inventory file before running the playbook:
undercloud_host ansible_user=stack ansible_host=undercloud ansible_ssh_extra_args='-F "/root/.quickstart/ssh.config.ansible"'
Create a configuration file +++++++++++++++++++++++++++
Put any necessary configuration into an Ansible variables file (which is just a YAML document). For example, if you wanted to enable logging via SSL, you would need a configuration file that looked like this:
::
fluentd_use_ssl: true
fluentd_shared_key: secret
fluentd_ca_cert: |
-----BEGIN CERTIFICATE-----
...
-----END CERTIFICATE-----
fluentd_private_key: |
-----BEGIN RSA PRIVATE KEY-----
...
-----END RSA PRIVATE KEY-----
You can also influence the data storage being used for performance metrics. It can be either gnocchi or graphite, which should work in most cases. For more details, please visit group_vars/all.yml.
You don't need a configuration file if you wish to use default options.
Run the playbook ++++++++++++++++
Once you have your inventory and configuration in place, you can run the playbook like this:
::
ansible-playbook playbook.yml -e @config.yml
The following documentation is automatically extracted from the
roles
directory in this distribution.
.. raw:: html
Uchiwa <https://uchiwa.io/>
__ is a web interface to
Sensu <http://sensuapp.org/>
__. This role installs and configures the
Uchiwa service.
Configuration +++++++++++++
uchiwa_package_name
(default: "uchiwa"
)
Uchiwa package name.
uchiwa_service_name
(default: "uchiwa"
)
Uchiwa service name.
uchiwa_bind
(default: "127.0.0.1"
)
Address on which Uchiwa should listen for connections.
uchiwa_server_address
(default: "localhost"
)
Address to which clients should connect to Uchiwa.
uchiwa_port
(default: 3000
)
Port on which Uchiwa should listen.
uchiwa_refresh
(default: 5
)
How often Uchiwa should refresh results.
uchiwa_file_path
(default: "/etc/sensu/uchiwa.json"
)
Path to Uchiwa configuration file.
sensu_datacenters
(default: [{"host": "{{ sensu_api_server }}", "name": "{{ uchiwa_sensu_api_server_name }}", "port": "{{ sensu_api_port }}"}]
)
List of Sensu datacenters to which Uchiwa should connect.
Actions defined on the role +++++++++++++++++++++++++++
This role configures the Apache proxy for Uchiwa.
Actions defined on the role +++++++++++++++++++++++++++
Configuration +++++++++++++
uchiwa_proxy_dest
(default: "http://{{ uchiwa_bind }}:{{ uchiwa_port }}"
)
URL for backend Uchiwa service.
uchiwa_proxy_htpasswd
(default: "/etc/httpd/conf/htpasswd-uchiwa"
)
Path to htpasswd file for controlling access to Uchiwa.
uchiwa_httpd_conf
(default: "{{ opstools_apache_config_dir }}/uchiwa.conf"
)
Path to the Apache configuration snippet for the Uchiwa proxy.
uchiwa_path
(default: "/uchiwa"
)
URL path at which to host Uchiwa.
uchiwa_credentials
(default: ["username": "operator", "password": "changeme"
])
List of Users and Passwords to create in htpasswd file
This role is responsible for installing and configuring the Sensu.
Configuration +++++++++++++
sensu_package_name
(default: "sensu"
)
Sensu package name.
sensu_server_service_name
(default: "sensu-server"
)
Sensu server service name.
sensu_api_service_name
(default: "sensu-api"
)
Sensu API service name.
sensu_client_service_name
(default: "sensu-client"
)
Sensu client service name.
sensu_config_path
(default: "/etc/sensu/conf.d"
)
Path to Sensu configuration directory.
sensu_log_path
(default: "/var/log/sensu"
)
Path to Sensu log directory.
sensu_runtime_path
(default: "/var/run/sensu"
)
Path to Sensu runtime directory.
sensu_owner
(default: "sensu"
)
Owner of Sensu configuration files.
sensu_group
(default: "sensu"
)
Group of Sensu configuration files.
sensu_rabbitmq_server
(default: "localhost"
)
Address of RabbitMQ server to which Sensu should connect.
sensu_rabbitmq_port
(default: 5672
)
Port of the RabbitMQ server.
sensu_rabbitmq_ssl_port
(default: 5671
)
Port of the RabbitMQ server for SSL communication.
sensu_rabbitmq_user
(default: "sensu"
)
Authenticate to RabbitMQ server as this user.
sensu_rabbitmq_password
(default: "sensu"
)
Authenticate to RabbitMQ server with this password.
sensu_rabbitmq_vhost
(default: "/sensu"
)
RabbitMQ vhost for use by Sensu.
sensu_api_bind
(default: "0.0.0.0"
)
Address on which Sensu should listen for connections.
sensu_api_port
(default: 4567
)
Port on which Sensu API should listen.
sensu_api_server
(default: "localhost"
)
Address to which clients should connect to contact the Sensu API.
sensu_redis_server
(default: "127.0.0.1"
)
Address of the Redis server to which Sensu should connect.
sensu_redis_port
(default: "{{ redis_listen_port }}"
)
Port on which the Redis server listens.
sensu_redis_password
(default: "{{ redis_password }}"
)
Password for authenticating to Redis.
sensu_client_subscription
(default: "monitoring-node"
)
Subscription string for monitoring host
sensu_client_bind
(default: "127.0.0.1"
)
Address on which Sensu client should listen on monitoring host.
sensu_client_port
(default: 3030
)
Port on which Sensu client should listen on monitoring host.
sensu_client_name
(default: "{{ ansible_fqdn }}"
)
Name for client service displayed in Uchiwa
sensu_client_address
(default: "{{ ansible_default_ipv4.address }}"
)
Address for client service displayed in Uchiwa
sensu_manage_checks
(default: true
)
Whether oschecks and default checks should be installed
sensu_overcloud_checks
(default: [{"name": "aodh-evaluator", "subscribers": ["overcloud-ceilometer-aodh-evaluator"]}, {"name": "aodh-listener", "subscribers": ["overcloud-ceilometer-aodh-listener"]}, {"name": "aodh-notifier", "subscribers": ["overcloud-ceilometer-aodh-notifier"]}, {"name": "ceilometer-central", "subscribers": ["overcloud-ceilometer-agent-central"]}, {"name": "ceilometer-collector"}, {"name": "ceilometer-compute"}, {"name": "ceilometer-compute", "subscribers": ["overcloud-ceilometer-agent-compute"]}, {"name": "ceilometer-notification", "subscribers": ["overcloud-ceilometer-agent-notification"]}, {"name": "ceilometer-polling"}, {"name": "ceph-df"}, {"name": "ceph-health"}, {"name": "cinder-api"}, {"name": "cinder-scheduler"}, {"name": "cinder-volume"}, {"name": "glance-api"}, {"name": "glance-registry"}, {"name": "haproxy", "service": "haproxy"}, {"name": "heat-api"}, {"name": "heat-api-cfn"}, {"name": "heat-api-cloudwatch"}, {"name": "heat-engine"}, {"name": "memcached", "service": "memcached"}, {"name": "neutron-api", "service": "neutron-server"}, {"name": "neutron-l3-agent", "service": "neutron-l3-agent"}, {"service": "neutron-metadata-agent", "name": "neutron-metadata-agent", "subscribers": ["overcloud-neutron-metadata"]}, {"name": "neutron-ovs-agent", "service": "neutron-openvswitch-agent"}, {"name": "nova-api"}, {"name": "nova-compute"}, {"name": "nova-conductor"}, {"name": "nova-consoleauth"}, {"name": "nova-libvirt", "service": "libvirtd"}, {"name": "nova-novncproxy", "subscribers": ["overcloud-nova-vncproxy"]}, {"name": "nova-scheduler"}, {"name": "pacemaker", "service": "pacemaker"}, {"name": "swift-proxy"}]
)
A list of Sensu checks that will run on the overcloud hosts. The
only required key for each item is name
. The systemd service
used in systemctl
checks defaults to openstack-<name>
, and the
subscribers
key defaults to [ "overcloud-<name>" ]
.
The following checks are disabled because the corresponding services are run as WSGI applications under Apache. This means that we don't have a good client-side healthcheck until we make changes either to sensu packaging or our tripleo integration.
.. code-block:: yaml
- name: ceilometer-api
- name: keystone-api
subscribers:
- overcloud-keystone
- overcloud-kestone
- name: aodh-api
subscribers:
- overcloud-ceilometer-aodh-api
sensu_overcloud_checks_pcs
A list of Sensu checks that will run on the overcloud hosts. Used for pcs resources.
sensu_remote_checks
(default: []
)
A list of sensu checks that will run on an opstools server
oscheck_default_username
(default: "admin"
)
Username for openstack checks.
oscheck_default_password
(default: "pass"
)
Password for openstack checks.
oscheck_default_project_name
(default: "admin"
)
Project name (aka tenant) for openstack checks.
oscheck_default_auth_url
(default: "http://controller:5000/v2.0"
)
Authentication URL (Keystone server) for openstack checks.
oscheck_default_region_name
(default: "RegionOne"
)
Region name for openstack checks.
This role is responsible for installing and configuring the Sensu server.
Actions defined on the role +++++++++++++++++++++++++++
Actions defined on the role +++++++++++++++++++++++++++
Sensu <http://sensuapp.org/>
__ is a distributed monitoring solution.
This role installs the Sensu package and performs some basic
configuration tasks.
Actions defined on the role +++++++++++++++++++++++++++
Configuration +++++++++++++
sensu_rabbitmq_with_ssl
(default: false
)
Enable SSL connections
sensu_rabbitmq_ssl_cert
(default: null
)
Content of SSL certificate to be created on Sensu client node.
sensu_rabbitmq_ssl_key
(default: null
)
Content of SSL key to be created on Sensu client node.
sensu_rabbitmq_ssl_certs_path
(default: "/etc/sensu/ssl"
)
Path to where certificates/key should be created on Sensu client node.
This role is responsible for installing and configuring the Sensu client.
Actions defined on the role +++++++++++++++++++++++++++
This is a utility role for use by other roles that wish to install rsyslog configuration snippets. It provides a handler that can be used to install rsyslogd. This role will not install or enable the rsyslog service.
Configuration +++++++++++++
rsyslog_config_dir
(default: "/etc/rsyslog.d"
)
Path to the directory containing rsyslog configuration snippets.
This role is a collection of roles for configuring additional package repositories.
This role configures access to the RDO package repository. This role is only used on CentOS hosts; it will not configure RDO repositories on RHEL systems.
Actions defined on the role +++++++++++++++++++++++++++
Configuration +++++++++++++
rdo_release
(default: "queens"
)
Specify which RDO release to use.
This role enables the CentOS OpsTools SIG package repository.
Actions defined on the role +++++++++++++++++++++++++++
Configuration +++++++++++++
opstools_repo_config
(default: "https://raw.githubusercontent.com/centos-opstools/centos-release-opstools/master/CentOS-OpsTools.repo"
)
URL to the CentOS OpsTools SIG repository configuration file. yamllint disable-line rule:line-length
Redis <http://redis.io/>
__ is an in-memory key/value store.
Sensu <http://sensuapp.org/>
__ uses Redis as a data-store for storing
monitoring data (e.g. a client registry, current check results, current
monitoring events, etc).
Configuration +++++++++++++
redis_listen_port
(default: 6379
)
Port on which Redis should listen.
redis_password
(default: "kJadrW$s&5."
)
Password for accessing the Redis service.
This role is responsible for installing and configuring the Redis service.
Actions defined on the role +++++++++++++++++++++++++++
Configuration +++++++++++++
redis_config_file
(default: "/etc/redis.conf"
)
Path to the Redis configuration file.
redis_interface
(default: ["127.0.0.1"]
)
Addresses on which Redis should listen for connections.
redis_package_name
(default: "redis"
)
Redis package name.
redis_service_name
(default: "redis"
)
Redis service name.
redis_owner
(default: "redis"
)
Owner of Redis configuration files.
RabbitMQ <https://www.rabbitmq.com/>
__ is a reliable messaging
service. It is used by Sensu <https://sensuapp.org/>
__ agents to
communicate with the Sensu server.
Configuration +++++++++++++
rabbitmq_port
(default: 5672
)
Port on which RabbitMQ should listen.
rabbitmq_server
(default: "localhost"
)
Address to which clients should connect to the RabbitMQ service.
rabbitmq_interface
(default: ["::"]
)
Addresses on which RabbitMQ should listen for connections.
rabbitmq_package_name
(default: "rabbitmq-server"
)
RabbitMQ package name.
rabbitmq_service_name
(default: "rabbitmq-server"
)
RabbitMQ service name.
rabbitmq_default_user
(default: "guest"
)
Default RabbitMQ user.
rabbitmq_config_file
(default: "/etc/rabbitmq/rabbitmq.config"
)
Path to RabbitMQ configuration file.
rabbitmq_config_owner
(default: "rabbitmq"
)
Owner of RabbitMQ configuration files.
rabbitmq_config_group
(default: "rabbitmq"
)
Group of RabbitMQ configuration files.
rabbitmq_config_mode
(default: "0644"
)
Mode of RabbitMQ configuration files.
rabbitmq_use_ssl
(default: false
)
Enable SSL connections
rabbitmq_ssl_cacert
(default: null
)
Content of CA certificate to be created on RabbitMQ server node.
rabbitmq_ssl_cert
(default: null
)
Content of server certificate to be created on RabbitMQ server node.
rabbitmq_ssl_key
(default: null
)
Content of server key to be created on RabbitMQ server node.
rabbitmq_ssl_certs_path
(default: "/etc/rabbitmq/ssl"
)
Path to where certificates/key should be created on server node.
rabbitmq_ssl_port
(default: 5671
)
Port on which RabbitMQ should listen on for SSL connections.
rabbitmq_ssl_fail_no_cert
(default: "false"
)
Fail for clients without a certificate to send to the RabbitMQ server.
rabbitmq_ssl_verify
(default: "verify_peer"
)
Valid values are: verify_peer - ensure a chain of trust is established when the client sends a certificate verify_none - no certificate exchange takes place from the client to the server
This role is responsible for installing and starting the RabbitMQ messaging service.
Actions defined on the role +++++++++++++++++++++++++++
This role installs packages and configuration that are required for the successful operation of the opstools-ansible playbooks.
This role installs the python-netaddr package (required by Ansible).
Actions defined on the role +++++++++++++++++++++++++++
Configuration +++++++++++++
python_netaddr_package_name
(default: "python-netaddr"
)This role installs the libsemanage-python package (required by Ansible).
Actions defined on the role +++++++++++++++++++++++++++
Configuration +++++++++++++
libsemanage_python_package_name
(default: "libsemanage-python"
)
libsemanage-python package name
This role installs the libselinux-python package (required by Ansible).
Actions defined on the role +++++++++++++++++++++++++++
Configuration +++++++++++++
libselinux_python_package_name
(default: "libselinux-python"
)
libselinux-python package name
Configuration +++++++++++++
opstools_apache_config_file
(default: "{{ httpd_config_parts_dir }}/opstools.conf"
)
Path to the Apache configuration file for the Ops Tools virtual host.
opstools_apache_config_dir
(default: "{{ opstools_apache_config_file }}.d"
)
Path to the directory from which we will read additional configuration snipps inside the OpsTools virtual host context.
opstools_apache_sslprotocol
(default: "all -SSLv2"
)
Apache SSL protocol settings.
opstools_apache_sslciphersuite
(default: "HIGH:MEDIUM:!aNULL:!MD5:!SEED:!IDEA"
)
Apache SSL cipher suite settings.
opstools_apache_sslcert
(default: "/etc/pki/tls/certs/localhost.crt"
)
Path to server SSL certificate.
opstools_apache_sslkey
(default: "/etc/pki/tls/private/localhost.key"
)
Path to SSL private key.
opstools_apache_http_port
(default: 80
)
Port on which to listen for HTTP connections.
opstools_apache_https_port
(default: 443
)
Port on which to listen for HTTPS connections.
opstools_default_redirect_file
(default: "\n{{ opstools_apache_config_dir }}/default_redirect.conf"
)
Path to configuration file that sets the default redirect for access
to the root URL (/
).
opstools_apache_force_https
(default: true
)
Force all http request to https
This role is responsible for configuring the Apache virtual host that will host Ops Tools services.
Actions defined on the role +++++++++++++++++++++++++++
Kibana <https://www.elastic.co/products/kibana>
__ is a web interface
for querying an
Elasticsearch <https://www.elastic.co/products/elasticsearch>
__ data
store.
Configuration +++++++++++++
kibana_path
(default: "/kibana"
)
This is the URL path at which clients can access Kibana.
kibana_package_name
(default: "kibana"
)
The Kibana package name.
kibana_service_name
(default: "kibana"
)
The Kibana service name.
kibana_config_dir
(default: "/opt/kibana/config"
)
Path to the Kibana configuration directory.
kibana_config_file
(default: "{{ kibana_config_dir }}/kibana.yml"
)
Path to the Kibana configuration file.
kibana_config_mode
(default: 420
)
Mode for the Kibana configuration file.
kibana_owner
(default: "kibana"
)
Owner for the Kibana configuration file.
kibana_group
(default: "kibana"
)
Group for the Kibana configuration file.
kibana_server_bind
(default: "localhost"
)
This is address to which Kibana should bind. Use "0.0.0.0" to listen on all interfaces; use "localhost" to allow access from the local system only.
kibana_server_address
(default: "{{ kibana_server_bind }}"
)
This is the address to which clients should connect to access Kibana (we can't always use kibana_server_bind for that because 0.0.0.0 is not an address to which we can connect).
kibana_server_port
(default: 5601
)
The port on which Kibana should listen.
kibana_elasticsearch_host
(default: "localhost"
)
Address of the Elasticsearch host.
kibana_elasticsearch_port
(default: 9200
)
Port on which Elasticsearch is listening.
kibana_server_elasticsearch_url
(default: "\nhttp://{{ kibana_elasticsearch_host }}:{{ kibana_elasticsearch_port }}"
)
URL for Kibana to contact Elasticsearch.
This role installs the Kibana web application. Configuration is taken
from the main kibana
role.
Actions defined on the role +++++++++++++++++++++++++++
This role configures the Apache proxy for Kibana.
Actions defined on the role +++++++++++++++++++++++++++
Configuration +++++++++++++
kibana_proxy_dest
(default: "http://{{ kibana_server_bind }}:{{ kibana_server_port }}"
)
The URL for the Kibana service.
kibana_proxy_htpasswd
(default: "/etc/httpd/conf/htpasswd-kibana"
)
Path to the htpasswd file for Kibana.
kibana_credentials
(default: "- username: 'operator' password: 'changeme'"
)
Hash with username and password for Kibana access to configure in the htpasswd file.
kibana_httpd_conf
(default: "{{ opstools_apache_config_dir }}/kibana.conf"
)
Path to the Apache configuration file for Kibana.
This role installs the Apache web server and associated modules.
Actions defined on the role +++++++++++++++++++++++++++
Configuration +++++++++++++
httpd_package_name
(default: "httpd"
)
Apache package name.
httpd_service_name
(default: "httpd"
)
Apache service name.
httpd_config_dir
(default: "/etc/httpd"
)
Path to Apache top-level configuration directory.
httpd_config_parts_dir
(default: "{{ httpd_config_dir }}/conf.d"
)
Path to directory containing Apache configuration snippets.
httpd_owner
(default: "root"
)
Owner of Apache configuration files.
httpd_group
(default: "root"
)
Group of Apache configuration files.
httpd_config_mode
(default: 420
)
Mode of Apache configuration files.
httpd_modules
(default: ["mod_ssl"]
)
Modules that will be installed along with Apache.
Configuration +++++++++++++
grafana_package_name
(default: "grafana"
)
grafana_server_bind
(default: "localhost"
)
This is address to which grafana should bind.
grafana_server_address
(default: "{{ grafana_server_bind }}"
)
This is the address to which clients should connect to access Grafana (we can't always use grafana_server_bind for that because 0.0.0.0 is not an address to which we can connect). Note: this needs to be reachable from the node running ansible-playbook
grafana_port
(default: 3001
)
The port on which Grafana should listen.
grafana_username
(default: "admin"
)
grafana admin username
grafana_password
(default: "admin"
)
grafana password
Actions defined on the role +++++++++++++++++++++++++++
Actions defined on the role +++++++++++++++++++++++++++
Configuration +++++++++++++
grafana_proxy_dest
(default: "http://{{ grafana_bind }}:{{ grafana_port }}"
)
URL for backend Grafana service.
grafana_httpd_conf
(default: "{{ opstools_apache_config_dir }}/grafana.conf"
)
Path to the Apache configuration snippet for the Grafana proxy.
grafana_path
(default: "/grafana"
)
URL path at which to host Grafana.
gauth
(default: "https://{{grafana_username}}:{{grafana_password}}@"
)
helper for API access
Actions defined on the role +++++++++++++++++++++++++++
Configuration +++++++++++++
fluentd_package_name
(default: "fluentd"
)
Fluentd package name.
fluentd_service_name
(default: "fluentd"
)
Fluentd service name.
fluentd_config_dir
(default: "/etc/fluentd"
)
Path to the Fluentd configuration directory.
fluentd_config_file
(default: "{{ fluentd_config_dir }}/fluent.conf"
)
Path to the main Fluentd configuration file.
fluentd_config_parts_dir
(default: "{{ fluentd_config_dir }}/config.d"
)
Path to the directory containing Fluentd configuration snippets.
fluentd_owner
(default: "root"
)
User that will own Fluentd config files.
fluentd_group
(default: "fluentd"
)
Group that will own Fluentd config files.
fluentd_config_mode
(default: 416
)
File mode for Fluentd configuration files.
fluentd_config_dir_mode
(default: 488
)
File mode for Fluentd configuration directories.
fluentd_plugins
(default: ["rubygem-fluent-plugin-secure-forward", "rubygem-fluent-plugin-add"]
)
A list of Fluentd plugins to install along with Fluentd.
fluentd_listen
(default: false
)
Set to true if Fluentd should listen for connections from remote Fluentd instances.
fluentd_use_ssl
(default: false
)
Set to true if Fluentd should use SSL.
fluentd_shared_key
(default: null
)
Shared secret key for SSL connections.
fluentd_ca_cert_path
(default: "{{ fluentd_config_dir }}/ca_cert.pem"
)
Where to find the Fluentd server certificate authority certificate.
fluentd_ca_cert
(default: null
)
Content of an x509 certificate that will be used to identify the server to clients.
fluentd_private_key
(default: null
)
The key corresponding to the certificate in fluentd_ca_cert
.
This roles installs the necessary configuration to send logs from the local syslog server to a Fluentd instance.
Actions defined on the role +++++++++++++++++++++++++++
Configuration +++++++++++++
fluentd_syslog_bind_address
(default: "127.0.0.1"
)
Address on which to listen for syslog messages.
fluentd_syslog_port
(default: 5140
)
Port on which to listen for syslog messages.
fluentd_syslog_tag
(default: "system.messages"
)
Fluentd tag to apply to syslog messages.
Fluentd <http://www.fluentd.org/>
__ is a log collection tool. It can
collect logs from a variety of sources, filter them, and send them to a
variety of destinations, including remote Fluentd instances.
We use Fluentd to receive logs from remote Fluentd clients and deliver
them to
Elasticsearch <https://www.elastic.co/products/elasticsearch>
__.
Actions defined on the role +++++++++++++++++++++++++++
This role configures a Fluentd listener that will listen for remote connections from other Fluentd clients.
Actions defined on the role +++++++++++++++++++++++++++
Configuration +++++++++++++
fluentd_server_plugins
(default: ["rubygem-fluent-plugin-elasticsearch"]
)
A list of plugins that will be installed on the fluentd server.
fluentd_private_key_path
(default: "{{ fluentd_config_dir }}/ca_key.pem"
)
Path to the SSL certificate private key.
fluentd_server_extraconfig
(default: {}
)
Additional fluentd configuration.
This role contains contains configuration to send logs from Fluentd to an Elasticsearch instance.
Actions defined on the role +++++++++++++++++++++++++++
Configuration +++++++++++++
fluentd_elasticsearch_host
(default: "localhost"
)
Address of the Elasticsearch host.
fluentd_elasticsearch_port
(default: 9200
)
Port on which Elasticsearch is accepting connections.
fluentd_elasticsearch_index
(default: "fluentd"
)
Elasticsearch index name.
fluentd_elasticsearch_type
(default: "fluentd"
)
Elasticsearch index type.
fluentd_elasticsearch_extraconfig
(default: {}
)
Additional Fluentd configuration to apply to the Elasticsearch output snippet.
This role manage the way of managing firewall rules. Using either iptables or firewalld tool. It also has the rules to be applied.
Configuration +++++++++++++
firewall_manage_rules
(default: true
)
Set this to False if you do not want the playbooks to make changes to the system firewall.
force_ipv6
(default: false
)
Force the use of ipv6
firewall_data
(default: {"redis_hosts": [{"protocol": "tcp", "port": "{{ redis_listen_port }}"}], "elastic_hosts": [{"protocol": "tcp", "port": "{{ elasticsearch_port }}"}], "uchiwa_hosts": [{"source": "{{ uchiwa_bind }}", "protocol": "tcp", "port": "{{ uchiwa_port }}"}, {"protocol": "tcp", "port": "{{ opstools_apache_http_port }}"}, {"protocol": "tcp", "port": "{{ opstools_apache_https_port }}"}], "fluent_hosts": [{"protocol": "tcp", "port": "{{ fluentd_port|default(24224) }}"}, {"protocol": "udp", "port": "{{ fluentd_port|default(24224) }}"}], "kibana_hosts": [{"source": "{{ kibana_server_bind }}", "protocol": "tcp", "port": "{{ kibana_server_port }}"}, {"protocol": "tcp", "port": "{{ opstools_apache_http_port }}"}, {"protocol": "tcp", "port": "{{ opstools_apache_https_port }}"}], "grafana_hosts": [{"protocol": "tcp", "port": "{{ opstools_apache_http_port }}"}, {"protocol": "tcp", "port": "{{ opstools_apache_https_port }}"}], "graphite_hosts": [{"protocol": "tcp", "port": "{{ graphite_port }}"}], "rabbit_hosts": [{"protocol": "tcp", "port": "{{ rabbitmq_port }}"}, {"protocol": "tcp", "port": "{{ rabbitmq_ssl_port }}"}], "collectd_hosts": [{"protocol": "tcp", "port": "{{ collectd_listen_port }}"}], "sensu_hosts": [{"protocol": "tcp", "port": "{{ sensu_api_port }}"}]}
)
A lists of hashes containing data for configuration firewall rules to be created on each host groups .. code-block:: json
{ host_group: [{port: PORT, source: SOURCE, protocol:PROTOCOL},
{port: PORT, protocol:PROTOCOL}]}
This role gathers facts from host regarding firewall resources
Actions defined on the role +++++++++++++++++++++++++++
This role instantiates the firewall rules that were setup in firewall_data
Actions defined on the role +++++++++++++++++++++++++++
Elasticsearch <https://www.elastic.co/products/elasticsearch>
__ is a
search and analytics engine used by Ops Tools to collect, index, search,
and analyze logs.
Configuration +++++++++++++
elasticsearch_package_name
(default: "elasticsearch"
)
Name of the Elasticsearch pacakge
elasticsearch_service_name
(default: "elasticsearch"
)
Name of the Elasticsearch service.
elasticsearch_config_dir
(default: "/etc/elasticsearch"
)
Path to the Elasticsearch configuration directory.
elasticsearch_config_yml
(default: "{{ elasticsearch_config_dir }}/elasticsearch.yml"
)
Path to the main Elasticsearch configuration file.
elasticsearch_sysconfig
(default: {}
)
Values that will be set in /etc/sysconfig/elasticsearch.
elasticsearch_sysconfig_path
(default: "/etc/sysconfig/elasticsearch"
)
Path to Elasticsearch sysconfig file.
elasticsearch_cluster_name
(default: "elasticsearch"
)
Elasticsearch cluster name.
elasticsearch_port
(default: 9200
)
Port on which Elasticsearch should listen.
elasticsearch_interface
(default: ["127.0.0.1", "::1"]
)
Addresses on which Elasticsearch should listten.
elasticsearch_config
(default: {"cluster.name": "{{ elasticsearch_cluster_name }}", "network.host": "{{ elasticsearch_interface }}", "http.cors.enabled": true, "http.port": "{{ elasticsearch_port }}", "http.cors.allow-origin": "/.*/"}
)
Configuration data for Elasticsearch. The contents of this variable
will be rendered as YAML in the file referenced by
elasticsearch_config_yml
.
elasticsearch_extraconfig
(default: {}
)
Additional configuration data for Elasticsearch. Use this if you
want to add options to elasticsearch.yml
without replacing the
defaults in elasticsearch_config
.
java_package_name
(default: "java"
)
Name of the package that provides a Java runtime environment.
Install the
Elasticsearch <https://www.elastic.co/products/elasticsearch>
__ engine
and all its dependencies.
Elasticsearch <https://www.elastic.co/products/elasticsearch>
__ is a
search and analytics engine used by Ops Tools to collect, index, search,
and analyze logs.
Actions defined on the role +++++++++++++++++++++++++++
Configuration +++++++++++++
collectd_package_name
(default: "collectd"
)
name of the collectd package.
collectd_service_name
(default: "collectd"
)
name of the collectd service.
collectd_plugin_packages
(default: ["collectd-disk", "collectd-ipmi", "collectd-iptables", "collectd-sensors"]
)
a list of additional packages to install (presumably ones that provide collectd plugins).
collectd_plugin_config
(default: {}
)
additional plugin configuration for collectd. each key in this dictionary will be used as the base of a filename, and the contents of that file will be the corresponding value.
collectd_config_dir
(default: "/etc/collectd.d"
)
where collectd configuration snippets are located.
collectd_config_file
(default: "/etc/collectd.conf"
)
path to the main collectd configuration file
collectd_auth_file
(default: "/etc/collectd.auth"
)
path to the file that will contain collectd network authentication credentials.
collectd_config_owner
(default: "root"
)
owner of collectd config files and directories
collectd_auth_file_mode
(default: "0600"
)
mode for collectd credentials file
collectd_config_file_mode
(default: "0600"
)
mode for collectd config files
collectd_config_dir_mode
(default: "0700"
)
mode for collect config directory
graphite_host
(default: "localhost"
)
target address for write_graphite plugin
graphite_port
(default: 2003
)
target port for write_graphite plugin
collectd_listen_address
(default: "0.0.0.0"
)
address on which collectd should listen for network connections
collectd_listen_port
(default: 25826
)
port on which collectd should listen for network connections
collectd_securitylevel
(default: "None"
)
This can be one of None, Sign, or Encrypt.
collectd_users
(default: {}
)
a dictionary of user: password pairs that will be written to the collectd credentials file when using Sign or Encrypt securitylevel.
collectd_purge
(default: true
)
if true, remove all configuration snippets from collectd_config_dir
collectd_purge_config
(default: true
)
if true, replace main collectd.conf with generated config
Actions defined on the role +++++++++++++++++++++++++++
Installs and configures an NTP client
(Chrony <https://chrony.tuxfamily.org/>
__) to ensure that the server
keeps correct time. Clock skew between the server and clients can cause
unexpected behaviors.
Actions defined on the role +++++++++++++++++++++++++++
Configuration +++++++++++++
chrony_package_name
(default: "chrony"
)
The name of the Chrony package.
chrony_service_name
(default: "chronyd"
)
The name of the Chrony service.
chrony_config_file
(default: "/etc/chrony.conf"
)
Path to the Chrony configuration file.
chrony_driftfile
(default: "/var/lib/chrony/drift"
)
Path to the Chrony driftfile.
chrony_logdir
(default: "/var/log/chrony"
)
Path to the Chrony log directory.
chrony_pools
(default: ["pool.ntp.org iburst"]
)
A list of pools to use for synchronziation. Each item is provided'
directly to the pool
command.
chrony_default_config
(default: ["makestep 1.0 3", "rtcsync"]
)
A list of configuration items that will be included verbatim in the Chrony configuration.
The TripleO <http://tripleo.org/>
__ installer for OpenStack includes support for Fluentd and
Sensu clients. See :doc:../tripleo_integration
.
If you encounter problems with or have suggestions about
opstools-ansible, open an issue on our Github issue tracker <https://github.com/centos-opstools/opstools-ansible/issues>
__.
If you would like to contribute code, documentation, or other changes to
the project, please read the :doc:../developers
.
Copyright 2016 Red Hat, Inc. <http://www.redhat.com/>
__
Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.