Modular Open Sim Racing Buton Box
The Modular Open Button Box (MOBB) project is a complete open source solution to build your own button box. It provides complete plans on how to build your own
Teensy 3.2 shield, button box ideas, box designs for 3D printers, drill tempaltes for your face plates or just ideas for your own design.
The design is modular so you may pick and choose from various parts to design YOUR button box the way YOU imagine it.
Design idea with UV-LEDs to provide illumunation when it is dark
Side by side box design
Two of the boxes used for current development
Example of pit limiter switch on older development board
The PCB is a shield for the Teensy 3.2 micro controller board. You may use the provided schematic to build your own on a perfboard, use the provided gerber files to have one manfucatured or contact me to send you one.
Assembly requires minor soldering skills but assembly is quite easy if you follow the instruction videos.
The current version supports
Any documentation in the "Documentation" directory is not up to date anymore!
I will produce a series of videos explaining how to build the PCB and how to configure the software.
The build video is available here https://www.youtube.com/watch?v=iexbjr4jJTc
This is an open source project - contributions are welcome!