n8n-pi

Tools and Images to Build a Raspberry Pi n8n server

Introduction

The purpose of this project is to create a Raspberry Pi image preconfigured with n8n so that it runs out of the box.

What is n8n?

n8n is a no-code/low code environment used to connect and automate different systems and services. It is programmed using a series of connected nodes that receive, transform, and then transmit date from and to other nodes. Each node represents a service or system allowing these different entities to interact. All of this is done using a WebUI.

Why n8n-pi?

Whevever a new technology is released, two common barriers often prevent potential users from trying out the technology:

1. System costs
2. Installation & configuration challenges

The n8n-pi project eliminates these two roadblocks by preconfiguring a working system that runs on easily available, low cost hardware. For as little as $40 and a few minutes, they can have a full n8n system up and running.

Thanks!

This project would not be possible if it was not for the help of the following:

• n8n Project
  • GitHub
  • Community
• Raspberry Pi
  • Documentation
  • Raspberry Pi OS
• GitHub
• Docsify

Documentation

All documentation for this project can be found at http://n8n-pi.tephlon.xyz.

Alternate Installation

If you are interested in installing and then running n8n using systemd, check out this gist by Sclafus.