Mpark Patterns Save

This is an experimental library that has evolved to P1371, proposed for C++23.

Project README

MPark.Patterns

This is an experimental library that has evolved to P1371, being proposed for C++23.

Introduction

MPark.Patterns is an experimental pattern matching library for C++17.

It determines whether a given value matches a pattern and, if it does, binds the desired portions of the value to a handler.

Pattern matching has been introduced to many programming languages outside of the functional world, and this library draws inspiration from languages such as Haskell, OCaml, Rust, Scala, and Swift.

#include <cstdio>

#include <mpark/patterns.hpp>

void fizzbuzz() {
  using namespace mpark::patterns;
  for (int i = 1; i <= 100; ++i) {
    match(i % 3, i % 5)(
        pattern(0, 0) = [] { std::printf("fizzbuzz\n"); },
        pattern(0, _) = [] { std::printf("fizz\n"); },
        pattern(_, 0) = [] { std::printf("buzz\n"); },
        pattern(_, _) = [i] { std::printf("%d\n", i); });
  }
}

int main() {
  fizzbuzz();
}

Basic Syntax

using namespace mpark::patterns;
IDENTIFIERS(<identifier>...);  // optional
match(<expr>...)(
    pattern(<pattern>...) = [](<binding>...) { /* ... */ },
    pattern(<pattern>...) = [](<binding>...) { /* ... */ },
    // ...
);

Types of Patterns

Expression Pattern

An expression pattern matches if the value compares equal to the given expression.

Requirements

Given an expression e and a value x, e == x must be a valid expression.

Syntax

<expr>

Examples

int factorial(int n) {
  using namespace mpark::patterns;
  return match(n)(pattern(0) = [] { return 1; },
                  //      ^ expression
                  pattern(_) = [n] { return n * factorial(n - 1); });
}

Arg Pattern

An arg pattern matches any value, and binds the value by passing it to the corresponding handler. This pattern can be repeated in a single pattern, and they match independent of each other.

Requirements

None.

Syntax

arg
arg(<pattern>)

Examples

int factorial(int n) {
  using namespace mpark::patterns;
  return match(n)(pattern(0) = [] { return 1; },
                  pattern(arg) = [](auto n) { return n * factorial(n - 1); });
                  //      ^^^ arg
}

using P = std::pair<int, int>;
P p = {101, 202};

using namespace mpark::patterns;
match(p)(pattern(arg(ds(101, _))) = [](P &p) { std::cout << "pair!\n"; },
         //      ^^^ pass the pair!
         pattern(_) = [] { std::cout << "not a pair\n"; });
// prints: "pair!"

Wildcard Pattern

A wildcard pattern matches any value and discards the value by not passing it to the corresponding handler. This pattern can be repeated within a single pattern, and they match independent of each other.

Requirements

None.

Syntax

_ (underscore)

Examples

int factorial(int n) {
  using namespace mpark::patterns;
  return match(n)(pattern(0) = [] { return 1; },
                  pattern(_) = [n] { return n * factorial(n - 1); });
                  //      ^ wildcard
}

Identifier Pattern

An identifier pattern is similar to arg and _ in that it matches any value.

Two major differences are:

Ability to operate on names rather than just arg or _.
When an identifier is repeated within a single pattern, the values bound to the repeated identifiers must compare equal for the pattern to match.

There are two types of identifier patterns: binding and discarding.

Requirements

If no identifiers are repeated, none.

Otherwise, let x be a repeated identifer and v, vs... be the group of values matched by the repeated instances of x. Then (... && (v == vs)) must be a valid expression. The same requirement applies to any other repeated identifiers in a single pattern.

Syntax

IDENTIFIERS(<identifier>...);
<identifier>
<identifier>(<pattern>)

If <identifier> has a leading _ (underscore), it is a discarding identifier. Otherwise, it is a binding identifier.

Examples

void is_same(int lhs, int rhs) {
  using namespace mpark::patterns;
  IDENTIFIERS(x, y);
  match(lhs, rhs)(
      pattern(x, x) = [](auto) { std::cout << "same\n"; },
      //      ^  ^ binding identifier (repeated)
      pattern(x, y) = [](auto, auto) { std::cout << "diff\n"; }
      //      ^  ^ binding identifier
  );
}

is_same(101, 101);  // prints: "same"
is_same(101, 202);  // prints: "diff"

void is_same(int lhs, rhs) {
  using namespace mpark::patterns;
  IDENTIFIERS(_x, _y);
  match(42, 42)(
      pattern(_x, _x) = [] { std::cout << "same\n"; },
      //      ^   ^ discarding identifier (repeated)
      pattern(_x, _y) = [] { std::cout << "diff\n"; }
      //      ^   ^ discarding identifier
  );
}

is_same(101, 101);  // prints: "same"
is_same(101, 202);  // prints: "diff"

std::tuple<int, int> t = {101, 202};
std::optional<int> o = 101;

using namespace mpark::patterns;
IDENTIFIERS(x, y);
match(t, o)(
    pattern(ds(x, x), some(x)) = [](auto x) {
      std::cout << "They're all " << x << "!\n";
    },
    pattern(ds(x, y), some(x)) = [](auto x, auto y) {
      std::cout << "I recognize x-y-x!\n";
    },
    pattern(_) = [] { std::cout << "I don't know.\n"; });
// prints: "I recognize x-y-x!"

Destructure Pattern

A destructure pattern matches values that hold multiple values.

Requirements

Given a value x of type T, T must satisfy one of the following conditions:

std::is_array_v<T> == true, or
std::is_class_v<T> == true and std::tuple_size<T> is a complete type, or
std::is_aggregate_v<T> == true

If (2), the following conditions must also be satisfied.

std::tuple_size<T>::value must be a well-formed integer constant expression, and
x.get() or get(x) must be a valid expression for all I in [0, std::tuple_size<T>::value)

For aggregate types (3), the current implementation only supports types that contain upto 16 non-static data members.

NOTE: These requirements are very similar to the requirements for C++17 Structured Binding.

Syntax

ds(<pattern>...)

Examples

auto t = std::make_tuple(101, "hello", 1.1);

// C++17 Structured Binding:
const auto & [x, y, z] = t;
// ...

// MPark.Patterns:
using namespace mpark::patterns;
IDENTIFIERS(x, y, z);
match(t)(
    pattern(ds(x, y, z)) = [](auto &&x, auto &&y, auto &&z) { /* ... */ });
    //      ^^^^^^^^^^^ destructure

NOTE: The top-level is wrapped by a tuple, allowing us to write:

void fizzbuzz() {
  for (int i = 1; i <= 100; ++i) {
    using namespace mpark::patterns;
    match(i % 3, i % 5)(
        pattern(0, 0) = [] { std::cout << "fizzbuzz\n"; },
        pattern(0, _) = [] { std::cout << "fizz\n"; },
        pattern(_, 0) = [] { std::cout << "buzz\n"; },
        pattern(_, _) = [i] { std::cout << i << '\n'; });
  }
}

Optional Pattern

An optional pattern matches values that can be dereferenced, and tested as a bool.

Requirements

Given a value x of type T, T must satisfy all of the following conditions:

*x is a valid expression, and
x is contextually convertible to bool

Syntax

some(<pattern>)
none

Examples

int *p = nullptr;

using namespace mpark::patterns;
match(p)(pattern(some(_)) = [] { std::cout << "some\n"; },
         pattern(none) = [] { std::cout << "none\n"; });
// prints: "none"

std::optional<int> o = 42;

using namespace mpark::patterns;
match(o)(
    pattern(some(arg)) = [](auto x) { std::cout << "some(" << x << ")\n"; },
    pattern(none) = [] { std::cout << "none\n"; });
// prints: "some(42)"

As Pattern

An as pattern matches values that is capable of holding a value of multiple types.

Requirements

Given a value x of type T, and a pattern as(<pattern>), T must satisfy one of the following conditions:

std::is_polymorphic_v<T> == true, or
std::is_class_v<T> == true and std::variant_size<T> is a complete type, or
x.any_cast() or any_cast(&x) is a valid expression

If (1), dynamic_cast<U'>(&x) must be a valid expression, where U' is pointer to U with the same cv-qualifiers as decltype(x)
If (2), x.get_if() or get_if(&x) must be a valid expression

Syntax

as(<pattern>)

Examples

struct Shape { virtual ~Shape() = default; };
struct Circle : Shape {};
struct Square : Shape {};

std::unique_ptr<Shape> shape = std::make_unique<Square>();

using namespace mpark::patterns;
match(shape)(pattern(some(as<Circle>(_))) = [] { std::cout << "Circle\n"; },
             pattern(some(as<Square>(_))) = [] { std::cout << "Square\n"; });
// prints: "Square"

using str = std::string;
std::variant<int, str> v = 42;

using namespace mpark::patterns;
match(v)(pattern(as<int>(_)) = [] { std::cout << "int\n"; },
         pattern(as<str>(_)) = [] { std::cout << "str\n"; });
// prints: "int"

using str = std::string;
std::any a = str("hello");

using namespace mpark::patterns;
match(a)(pattern(as<int>(_)) = [] { std::cout << "int\n"; },
         pattern(as<str>(_)) = [] { std::cout << "str\n"; });
// prints: "str"

Visit Pattern

A visit pattern matches values that is capable of holding a value of closed set of types, and can be visited.

Requirements

Given a value x, The following code must be valid.

using std::visit;
visit([](auto &&) {}, x);`

Syntax

vis(<pattern>)

Examples

using str = std::string;
std::variant<int, str> v = "hello world!";

struct Visitor {
  void operator()(int n) const { std::cout << "int: " << n << '\n'; }
  void operator()(const str &s) const { std::cout << "str: " << s << '\n'; }
};

using namespace mpark::patterns;
match(v)(pattern(vis(arg)) = Visitor{});
// prints: "str: hello world!".

Alternation Pattern

An alternation pattern matches values that match any of the given patterns.

Requirements

None.

Syntax

anyof(<pattern>...)

Examples

std::string s = "large";

using namespace mpark::patterns;
match(s)(
    pattern(anyof("big", "large", "huge")) = [] { std::cout << "big!\n"; },
    pattern(anyof("little", "small", "tiny")) = [] { std::cout << "small.\n"; },
    pattern(_) = [] { std::cout << "unknown size.\n"; });

Variadic Pattern

A variadic pattern matches 0 or more values that match a given pattern.

Requirements

A variadic pattern can only appear within a destructure pattern.
A variadic pattern can only appear once.

Syntax

variadic(<pattern>)

Examples

auto x = std::make_tuple(101, "hello", 1.1);

using namespace mpark::patterns;
match(x)(
    pattern(ds(variadic(arg))) = [](const auto &... xs) {
      int dummy[] = { (std::cout << xs << ' ', 0)... };
      (void)dummy;
    });
// prints: "101 hello 1.1 "

This could also be used to implement C++17 std::apply:

template <typename F, typename Tuple>
decltype(auto) apply(F &&f, Tuple &&t) {
  using namespace mpark::patterns;
  return match(std::forward<T>(t))(
      pattern(ds(variadic(arg))) = std::forward<F>(f));
}

and even C++17 std::visit:

template <typename F, typename... Vs>
decltype(auto) visit(F &&f, Vs &&... vs) {
  using namespace mpark::patterns;
  return match(std::forward<Vs>(vs)...)(
      pattern(variadic(vis(arg))) = std::forward<F>(f));
}

We can even get a little fancier:

int x = 42;
auto y = std::make_tuple(101, "hello", 1.1);

using namespace mpark::patterns;
match(x, y)(
    pattern(arg, ds(variadic(arg))) = [](const auto &... xs) {
      int dummy[] = { (std::cout << xs << ' ', 0)... };
      (void)dummy;
    });
// prints: "42 101 hello 1.1 "

Pattern Guards

While pattern matching is very useful to match values against patterns, it mainly focuses on equality comparisons. Pattern guards are used to test whether the bound values satisfy some predicate.

`WHEN`

A WHEN clause appears inside the handler as the only expression. A WHEN clause differs from an if statement in that if the conditional expression evaluates to false, the WHEN clause falls through to the next case, whereas the if statement would stay in the handler.

Requirements

The WHEN clause may only appear once inside the handler as the only expression, and the conditional expression must be contextually convertible to bool.

Syntax

WHEN(<condition>) { /* ... */ };

Examples

using namespace mpark::patterns;
IDENTIFIERS(x, y);
match(101, 202)(
    pattern(x, x) = [](int) { std::cout << "EQ\n"; },
    pattern(x, y) = [](int x, int y) { WHEN(x > y) { std::cout << "GT\n"; }; },
    pattern(x, y) = [](int x, int y) { WHEN(x < y) { std::cout << "LT\n"; }; });
// prints: "LT"

Pattern Statements

`if_let`

This construct is simply syntactic sugar for the following situation:

std::optional<int> o = 42;

using namespace mpark::patterns;
match(o)(
    pattern(some(arg)) = [](auto x) { ... },
    pattern(_) = [] {});

For this situation, if_let provides a cleaner interface:

std::optional<int> o = 42;

using namespace mpark::patterns;
if_let (pattern(some(arg)) = o) = [](auto x) {
  // ...
};

`for_let`

Suppose we want to match each element in a range-based for loop with pattern. We could imagine being able to write something like:

std::vector<std::pair<int, int>> pairs = {{0, 1}, {1, 1}, {0, 0}, {0, 2}};

for ((0, x) : pairs) {
  std::cout << x << ' ';
}
// prints: "1 0 2 "

With if_let we can say something close-ish:

std::vector<std::pair<int, int>> pairs = {{0, 1}, {1, 1}, {0, 0}, {0, 2}};

for (const auto &p : pairs) {
  using namespace mpark::patterns;
  if_let (pattern(ds(0, arg)) = p) = [](auto x) {
    std::cout << x << ' ';
  };
}
// prints: "1 0 2 "

for_let allows the above example to be written more concisely:

std::vector<std::pair<int, int>> pairs = {{0, 1}, {1, 1}, {0, 0}, {0, 2}};

using namespace mpark::patterns;
for_let (pattern(ds(0, arg)) = pairs) = [](auto x) {
  std::cout << x << ' ';
};
// prints: "1 0 2 "

for_let also provides the break and continue statements with return Break; and return Continue; respectively.

std::vector<std::pair<int, int>> pairs = {{0, 1}, {1, 1}, {0, 0}, {0, 2}};

using namespace mpark::patterns;
for_let (pattern(ds(0, arg)) = pairs) = [](auto x) {
  if (x == 1) return Break;
  std::cout << x << ' ';
  return Continue;
};
// prints: "0 "

std::vector<std::pair<int, int>> pairs = {{0, 1}, {1, 1}, {0, 0}, {0, 2}};

using namespace mpark::patterns;
for_let (pattern(ds(0, arg)) = pairs) = [](auto x) {
  if (x == 0) return Continue;
  std::cout << x << ' ';
  return Continue;
};
// prints: "1 2 "

Requirements

This library requires a standard conformant C++17 compiler. The following compilers are continously tested:

Compiler	Operating System	Version String
GCC 7.4.0	Ubuntu 16.04.6 LTS	g++-7 (Ubuntu 7.4.0-1ubuntu1~16.04~ppa1) 7.4.0
GCC 8.1.0	Ubuntu 16.04.6 LTS	g++-8 (Ubuntu 8.1.0-5ubuntu1~16.04) 8.1.0
Clang 5.0.0	Ubuntu 16.04.6 LTS	clang version 5.0.0-3~16.04.1 (tags/RELEASE_500/final)
Clang 6.0.0	Ubuntu 16.04.6 LTS	clang version 6.0.0-1ubuntu2~16.04.1 (tags/RELEASE_600/final)
Clang 7.1.0	Ubuntu 16.04.6 LTS	clang version 7.1.0-svn353565-1~exp1~20190408084827.60 (branches/release_70)

CMake Variables

MPARK_PATTERNS_INCLUDE_TESTS:BOOL (default: OFF)

Build tests.

Unit Tests

Refer to test/README.md.

License

Distributed under the Boost Software License, Version 1.0.

Open Source Agenda is not affiliated with "Mpark Patterns" Project. README Source: mpark/patterns

Stars

645

Open Issues

Last Commit

4 years ago

Repository

mpark/patterns

Homepage

https://wg21.link/p1371

Open Source Agenda Badge

<a href="https://www.opensourceagenda.com/projects/mpark-patterns"><img src="https://www.opensourceagenda.com/projects/mpark-patterns/reviews/badge.svg" alt="Open Source Agenda"></a>

Submit Review Review Your Favorite Project

Submit Resource Articles, Courses, Videos

Submit Article Submit a post to our blog

From the blog

Dec 11, 2022

How to Choose Which Programming Language to Learn First?

From the blog

Dec 11, 2022

Mpark Patterns Save

MPark.Patterns

Introduction

Basic Syntax

Types of Patterns

Expression Pattern

Requirements

Syntax

Examples

Arg Pattern

Requirements

Syntax

Examples

Wildcard Pattern

Requirements

Syntax

Examples

Identifier Pattern

Requirements

Syntax

Examples

Destructure Pattern

Requirements

Syntax

Examples

Optional Pattern

Requirements

Syntax

Examples

As Pattern

Requirements

Syntax

Examples

Visit Pattern

Requirements

Syntax

Examples

Alternation Pattern

Requirements

Syntax

Examples

Variadic Pattern

Requirements

Syntax

Examples

Pattern Guards

WHEN

Requirements

Syntax

Examples

Pattern Statements

if_let

for_let

Requirements

CMake Variables

Unit Tests

License

Related Work

Open Source Agenda Badge

From the blog

How to Choose Which Programming Language to Learn First?

From the blog

How to Choose Which Programming Language to Learn First?

`WHEN`

`if_let`

`for_let`