Mikepitagno Asa Cleanup Save

ASA Cleanup

Introduction

A Python command line script to identify unused access-lists, object-groups and objects within a Cisco ASA firewall configuration file. The script will also dynamically modify the config file during execution to prevent having to run it multiple times. For example, if an ACL marked for removal renders an object-group no longer necessary, the script will also mark that object-group for removal on the same run.

Update (2016-10-12): Added support to cleanup unused group policies; Output now printed to file.

Update (2018-10-28): Added support for different object and object_group types (e.g. network, service, protocol, icmp-type); Previously script would only parse network types; Script now outputs updated configuration file (.cfg) in addition to file with recommended changes (.txt).

Installation Notes / Prerequisites

Python2 Version - asa_cleanup.py
Python3 Version - asa_cleanup_v3.py

CiscoConfParse Required Debian/Ubuntu based install:

sudo apt-get install python-pip
sudo pip install ciscoconfparse

Usage

asa_cleanup.py 'CONFIG_FILE'

Sample Output

Group Policy Removal Lines:
clear configure group-policy GRP1
clear configure group-policy GRP2

ACL Removal Lines:
clear configure access-list ACL1
clear configure access-list ACL2

Object-Group Removal Lines:
no object-group network NETOBJECTGRP1
no object-group network NETOBJECTGRP2
no object-group service SERVOBJECTGRP1
no object-group service SERVOBJECTGRP2
no object-group icmp-type ICMPOBJECTGRP1
no object-group protocol PROTOCOLGRP1

Object Removal Lines:
no object network NETOBJECT1
no object network NETOBJECT2
no object service SERVOBJECT1
no object service SERVOBJECT2