Maccraft123 Cadmium Save Abandoned
Thanks @LoganMD for the logo
Cadmium, The state-of-the-art Linux distro for RISC laptops that I could get my hands on (atm only ARM Chromebooks)
It also doesn't suck!
Hardware support:
Note: (FW) entries are meant to indicate that firmware(that is included in Cadmium) is needed for piece of hardware to work correctly.
| Hardware support matrix | Duet | Kevin and Bob | Asus C100PA and C201PA | Acer Spin 513 | Duet 5 | HP X2 (2021) | Lenovo C or S 330 |
|---|---|---|---|---|---|---|---|
| Internal Display | Y | Y | Y | Y | Y | Y | Y |
| External Display | N | Y(FW) | Y | N | ? | N | N |
| Display autorotation | Y | Y | N | N | Y | Y | Y |
| Hardware video decoding | N | P | P | Y(FW) | ? | ? | ? |
| Touchscreen | Y | Y | Y | Y | Y | Y | Y |
| Pen Input | Y | Y | Y | ? | Y | ? | |
| WiFi | Y(FW) | Y(FW) | Y(FW) | Y(FW) | Y(FW) | Y (FW) | Y(FW) |
| 3D Acceleration | Y | Y | Y | Y(FW) | ? | Y (FW) | ? |
| GPU reclocking | Y | Y | ? | Y | ? | Y | ? |
| Audio | Y | Y | Y | P(only usb + bt) | Y | P(only usb + bt) | Y |
| Bluetooth | Y | ? | N | Y | Y | Y | N |
| Front Camera | N | Y | Y | Y | ? | N | Y |
| Back Camera | N | ? | N | ||||
| USB | Y | Y | Y | Y | Y | Y | Y |
| USB Gadget | ? | ? | N | ? | ? | Y | |
| Suspending and resuming | Y | Y | Y | Y | ? | N | Y |
| eMMC installation | Y | Y | Y | Y | Y | ? | Y |
| KVM Virtualtization | N | N | N | N | ? | Y | ? |
| Anbox | P | N | N | ? | ? | ? |
Official IRC channel is #cadmium on Libera.chat
Official discord server is at https://discord.gg/ZZbwyvKCmV
Installation
-
Make sure that you have developer mode unlocked
-
Enable booting from usb, by running
enable_dev_usb_bootin ChromeOS root shell accessible when you log in as root after pressing ctrl + alt + refresh. -
Reboot Once you have this out, continue with instructions:
-
Edit ./config to reflect your board
-
./build-all /dev/sdXOn a Linux machine(ChromeOS doesn't count(except in linux chroot)). For Debian rootfs, binfmt and debootstrap are needed to work correctly. -
When
build-allis ran like./build-all <file> <size>, it builds Cadmium towith size of (2G should be fine) -
Enable developer mode
-
Plug pendrive into your laptop.
-
Boot from USB
-
After running
./installafter connecting to internet, Cadmium will be installed on internal emmc memory -
To update kernel on eMMC memory run:
./install-kernelfrom pendrive
OR
- Enable developer mode(instructions are in the wiki for krane)
- Download and uncompress
cadmium-<device>.tar.gzto your pendrive - Boot from USB
- Run
./install
Binary drivers are unsupported in Cadmium and never will be
Dependencies on build machine
- Recent Linux distribution
- Binfmt when Debian rootfs is used
-
debootstrapwhen Debian rootfs is used -
qemu-user-staticwhen build machine can't run binaries for target machine -
vboot-utils u-boot-tools(vbutil_kernel, cgpt and mkimage) to pack kernel into format understandable by depthcharge -
gcc-aarch64-linux-gnufor compiling to ARM64 orgcc-arm-linux-gnueabihffor compiling to ARMv7 -
curlto download the kernel -
bsdtarfor writing the archive file (from thelibarchive-toolspackage) -
f2fs-toolsfor creating the filesystem used by Cadmium -
partedto prepare gpt table to be modified by cgpt - Build dependencies for kernel compilation
Open Source Agenda Badge
