M19O2

DiY Oxygen Concentrator based on / inspired by the OpenOx, Marut, RepRap and Project Apollo platforms.

About

Read about the project on Hackaday. Also check out the project on the hackaday.io project page.

The M19O2 Oxygen Concentrator is "Open Source Hardware" as certified by the OSHWA. OSHWA UID for the M19O2 is IN000029

Contribute

You can contribute on the Ketto fundraiser page

Coordination lists

• Notion workspace for the M19 collective.
• M19O2 Master sheet tracks the city-wise coordinators, tools, FAQs etc.
• BOM M19O2 sheet lists the master Bill of Materials (BOM) along with city-wise BOM
• Starting a community lab document and Build List for Labs sheet for lab onboarding information and coordination.

Engineering

• Labview testbench is a testbench executable developed by Fracktal Works, useful for tuning the performance of your concentrator prototypes.
• Computer-aided Design/Engineering for design, version control and simulation data related to the M19O2 and its iterations. Committed to open-source and open-innovation.
• Electronics for all things electronics, including comprehensive design and development data of DIY Oxygen Analyzers and other subprojects.

How to use this repo

Open a terminal on your computer. Run

git clone https://github.com/MakersAsylumIndia/M19O2 && cd M19O2
git submodule update --init --recursive

The repository shall be available on your computer. To periodically update the contents,

cd M19O2
git pull
git submodule update --init --recursive

How to contribute to this repository

Fork this repository. You can find the command for this on the top-right of the webpage. This shall create a personal, updateable copy of this repository on your github account.

On your computer terminal, run

git clone https://github.com/<your-username>/M19O2 && cd M19O2
git submodule update --init --recursive

Add your contributions to this repository and save on github.

cd M19O2
git add .
git commit -m "<your-commit-message>"
git push origin

To contribute your work to the M19 Collective, open your repository in a browser and issue a pull request from your repository to the one at Makers' Asylum.

License

Licenses

Hardware

CERN Open Hardware License Version 2 - Strongly Reciprocal (CERN-OHL-S-2.0).

Software

MIT open source license.

Documentation:

This work is licensed under a Creative Commons Attribution 4.0 International License.