A LoRa based APRS tracker for ESP32 boards.
The LoRa APRS Tracker will work with very cheep hardware which you can buy from amazon, ebay or aliexpress. Try it out and be part of the APRS network.
You can use one of the Lora32 boards:
This boards cost around 30 Euros, they are very cheap but perfect for an LoRa iGate. Keep in minde: you need a 433MHz version!
There is a german quick start page! Take a look ;)
There is a french quick start page! Take a look ;)
The best success is to use PlatformIO (and it is the only platform where I can support you).
button_tx
setting enables manual triggering of the beacon using the middle button on the T-Beam.You may not need to use PlatformIO because compilation and configuration can be done via console.
# switch to virtual env, for example using pipenv
pipenv shell
# install platformio
pipenv install platformio
# upload to board
pio run -t upload
Look at my other project: a LoRa iGate