Lightning Network Daemon ⚡️
This is a minor hot fix release that resolves an issue that arises (sendrawtransaction calls rejected) when lnd is run with bitcoind 27. This hot fix release bumps a dependency to ensure that lnd is compatible with the latest version of bitcoind.
In order to verify the release, you'll need to have gpg or gpg2 installed on your system. Once you've obtained a copy (and hopefully verified that as well), you'll first need to import the keys that have signed this release if you haven't done so already:
curl https://raw.githubusercontent.com/lightningnetwork/lnd/master/scripts/keys/roasbeef.asc | gpg --import
Once you have the required PGP keys, you can verify the release (assuming manifest-roasbeef-v0.17.5-beta.sig and manifest-v0.17.5-beta.txt are in the current directory) with:
gpg --verify manifest-roasbeef-v0.17.5-beta.sig manifest-v0.17.5-beta.txt
You should see the following if the verification was successful:
gpg: Signature made Mon Apr 22 16:43:45 2024 PDT
gpg: using RSA key 60A1FA7DA5BFF08BDCBBE7903BBD59E99B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>" [ultimate]
That will verify the signature of the manifest file, which ensures integrity and authenticity of the archive you've downloaded locally containing the binaries. Next, depending on your operating system, you should then re-compute the sha256 hash of the archive with shasum -a 256 <filename>, compare it with the corresponding one in the manifest file, and ensure they match exactly.
From this new version onwards, in addition time-stamping the git tag with OpenTimestamps, we'll also now timestamp the manifest file along with its signature. Two new files are now included along with the rest of our release artifacts: manifest-roasbeef-v0.17.5-beta.txt.asc.ots.
Assuming you have the opentimestamps client installed locally, the timestamps can be verified with the following commands:
ots verify manifest-roasbeef-v0.17.5-beta.sig.ots -f manifest-roasbeef-v0.17.5-beta.sig
Alternatively, the OpenTimestamps website can be used to verify timestamps if one doesn't have a bitcoind instance accessible locally.
These timestamps should give users confidence in the integrity of this release even after the key that signed the release expires.
Our release binaries are fully reproducible. Third parties are able to verify that the release binaries were produced properly without having to trust the release manager(s). See our reproducible builds guide for how this can be achieved.
The release binaries are compiled with go1.21.0, which is required by verifiers to arrive at the same ones.
They include the following build tags: autopilotrpc, signrpc, walletrpc, chainrpc, invoicesrpc, neutrinorpc, routerrpc, watchtowerrpc, monitoring, peersrpc, kvdb_postrgres, kvdb_etcd and kvdb_sqlite. Note that these are already included in the release script, so they do not need to be provided.
The make release command can be used to ensure one rebuilds with all the same flags used for the release. If one wishes to build for only a single platform, then make release sys=<OS-ARCH> tag=<tag> can be used.
Finally, you can also verify the tag itself with the following command:
$ git verify-tag v0.17.5-beta
gpg: Signature made Mon 22 Apr 2024 06:59:27 PM UTC using RSA key ID 9B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>"
To verify the lnd and lncli binaries inside the docker images against the signed, reproducible release binaries, there is a verification script in the image that can be called (before starting the container for example):
$ docker run --rm --entrypoint="" lightninglabs/lnd:v0.17.5-beta /verify-install.sh v0.17.5-beta
$ OK=$?
$ if [ "$OK" -ne "0" ]; then echo "Verification failed!"; exit 1; done
$ docker run lightninglabs/lnd [command-line options]
Users are able to rebuild the target release themselves without having to fetch any of the dependencies. In order to do so, assuming
that vendor.tar.gz and lnd-source-v0.17.5-beta.tar.gz are in the current directory, follow these steps:
tar -xvzf vendor.tar.gz
tar -xvzf lnd-source-v0.17.5-beta.tar.gz
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.5-beta" ./cmd/lnd
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.5-beta" ./cmd/lncli
The -mod=vendor flag tells the go build command that it doesn't need to fetch the dependencies, and instead, they're all enclosed in the local vendor directory.
Additionally, it's now possible to use the enclosed release.sh script to bundle a release for a specific system like so:
make release sys="linux-arm64 darwin-amd64"
⚡️⚡️⚡️ OK, now to the rest of the release notes! ⚡️⚡️⚡️
This is a hot fix release that fixes multiple bugs: Channel open hanging until restart, a memory leak when using polling mode for bitcoind, sync getting lost for pruned nodes and the REST proxy not working when TLS certificate encryption is turned on.
In order to verify the release, you'll need to have gpg or gpg2 installed on your system. Once you've obtained a copy (and hopefully verified that as well), you'll first need to import the keys that have signed this release if you haven't done so already:
curl https://raw.githubusercontent.com/lightningnetwork/lnd/master/scripts/keys/roasbeef.asc | gpg --import
Once you have the required PGP keys, you can verify the release (assuming manifest-roasbeef-v0.17.4-beta.sig and manifest-v0.17.4-beta.txt are in the current directory) with:
gpg --verify manifest-roasbeef-v0.17.4-beta.sig manifest-v0.17.4-beta.txt
You should see the following if the verification was successful:
gpg: Signature made Wed Sep 30 17:35:20 2020 PDT
gpg: using RSA key 60A1FA7DA5BFF08BDCBBE7903BBD59E99B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>" [ultimate]
That will verify the signature of the manifest file, which ensures integrity and authenticity of the archive you've downloaded locally containing the binaries. Next, depending on your operating system, you should then re-compute the sha256 hash of the archive with shasum -a 256 <filename>, compare it with the corresponding one in the manifest file, and ensure they match exactly.
From this new version onwards, in addition time-stamping the git tag with OpenTimestamps, we'll also now timestamp the manifest file along with its signature. Two new files are now included along with the rest of our release artifacts: manifest-roasbeef-v0.17.4-beta.txt.asc.ots.
Assuming you have the opentimestamps client installed locally, the timestamps can be verified with the following commands:
ots verify manifest-roasbeef-v0.17.4-beta.sig.ots -f manifest-roasbeef-v0.17.4-beta.sig
Alternatively, the OpenTimestamps website can be used to verify timestamps if one doesn't have a bitcoind instance accessible locally.
These timestamps should give users confidence in the integrity of this release even after the key that signed the release expires.
Our release binaries are fully reproducible. Third parties are able to verify that the release binaries were produced properly without having to trust the release manager(s). See our reproducible builds guide for how this can be achieved.
The release binaries are compiled with go1.21.0, which is required by verifiers to arrive at the same ones.
They include the following build tags: autopilotrpc, signrpc, walletrpc, chainrpc, invoicesrpc, neutrinorpc, routerrpc, watchtowerrpc, monitoring, peersrpc, kvdb_postrgres, kvdb_etcd and kvdb_sqlite. Note that these are already included in the release script, so they do not need to be provided.
The make release command can be used to ensure one rebuilds with all the same flags used for the release. If one wishes to build for only a single platform, then make release sys=<OS-ARCH> tag=<tag> can be used.
Finally, you can also verify the tag itself with the following command:
$ git verify-tag v0.17.4-beta
gpg: Signature made Tue Sep 15 18:55:00 2020 PDT
gpg: using RSA key 60A1FA7DA5BFF08BDCBBE7903BBD59E99B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>" [ultimate]
To verify the lnd and lncli binaries inside the docker images against the signed, reproducible release binaries, there is a verification script in the image that can be called (before starting the container for example):
$ docker run --rm --entrypoint="" lightninglabs/lnd:v0.17.4-beta /verify-install.sh v0.17.4-beta
$ OK=$?
$ if [ "$OK" -ne "0" ]; then echo "Verification failed!"; exit 1; done
$ docker run lightninglabs/lnd [command-line options]
Users are able to rebuild the target release themselves without having to fetch any of the dependencies. In order to do so, assuming
that vendor.tar.gz and lnd-source-v0.17.4-beta.tar.gz are in the current directory, follow these steps:
tar -xvzf vendor.tar.gz
tar -xvzf lnd-source-v0.17.4-beta.tar.gz
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.4-beta" ./cmd/lnd
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.4-beta" ./cmd/lncli
The -mod=vendor flag tells the go build command that it doesn't need to fetch the dependencies, and instead, they're all enclosed in the local vendor directory.
Additionally, it's now possible to use the enclosed release.sh script to bundle a release for a specific system like so:
make release sys="linux-arm64 darwin-amd64"
⚡️⚡️⚡️ OK, now to the rest of the release notes! ⚡️⚡️⚡️
https://github.com/lightningnetwork/lnd/blob/v0.17.4-beta/docs/release-notes/release-notes-0.17.4.md
This is a hot fix release that fixes multiple bugs: Channel open hanging until restart, a memory leak when using polling mode for bitcoind, sync getting lost for pruned nodes and the REST proxy not working when TLS certificate encryption is turned on.
In order to verify the release, you'll need to have gpg or gpg2 installed on your system. Once you've obtained a copy (and hopefully verified that as well), you'll first need to import the keys that have signed this release if you haven't done so already:
curl https://raw.githubusercontent.com/lightningnetwork/lnd/master/scripts/keys/roasbeef.asc | gpg --import
Once you have the required PGP keys, you can verify the release (assuming manifest-roasbeef-v0.17.4-beta.rc1.sig and manifest-v0.17.4-beta.rc1.txt are in the current directory) with:
gpg --verify manifest-roasbeef-v0.17.4-beta.rc1.sig manifest-v0.17.4-beta.rc1.txt
You should see the following if the verification was successful:
gpg: Signature made Wed Sep 30 17:35:20 2020 PDT
gpg: using RSA key 60A1FA7DA5BFF08BDCBBE7903BBD59E99B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>" [ultimate]
That will verify the signature of the manifest file, which ensures integrity and authenticity of the archive you've downloaded locally containing the binaries. Next, depending on your operating system, you should then re-compute the sha256 hash of the archive with shasum -a 256 <filename>, compare it with the corresponding one in the manifest file, and ensure they match exactly.
From this new version onwards, in addition time-stamping the git tag with OpenTimestamps, we'll also now timestamp the manifest file along with its signature. Two new files are now included along with the rest of our release artifacts: manifest-roasbeef-v0.17.4-beta.rc1.txt.asc.ots.
Assuming you have the opentimestamps client installed locally, the timestamps can be verified with the following commands:
ots verify manifest-roasbeef-v0.17.4-beta.rc1.sig.ots -f manifest-roasbeef-v0.17.4-beta.rc1.sig
Alternatively, the OpenTimestamps website can be used to verify timestamps if one doesn't have a bitcoind instance accessible locally.
These timestamps should give users confidence in the integrity of this release even after the key that signed the release expires.
Our release binaries are fully reproducible. Third parties are able to verify that the release binaries were produced properly without having to trust the release manager(s). See our reproducible builds guide for how this can be achieved.
The release binaries are compiled with go1.21.0, which is required by verifiers to arrive at the same ones.
They include the following build tags: autopilotrpc, signrpc, walletrpc, chainrpc, invoicesrpc, neutrinorpc, routerrpc, watchtowerrpc, monitoring, peersrpc, kvdb_postrgres, kvdb_etcd and kvdb_sqlite. Note that these are already included in the release script, so they do not need to be provided.
The make release command can be used to ensure one rebuilds with all the same flags used for the release. If one wishes to build for only a single platform, then make release sys=<OS-ARCH> tag=<tag> can be used.
Finally, you can also verify the tag itself with the following command:
$ git verify-tag v0.17.4-beta.rc1
gpg: Signature made Tue Sep 15 18:55:00 2020 PDT
gpg: using RSA key 60A1FA7DA5BFF08BDCBBE7903BBD59E99B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>" [ultimate]
To verify the lnd and lncli binaries inside the docker images against the signed, reproducible release binaries, there is a verification script in the image that can be called (before starting the container for example):
$ docker run --rm --entrypoint="" lightninglabs/lnd:v0.17.4-beta.rc1 /verify-install.sh v0.17.4-beta.rc1
$ OK=$?
$ if [ "$OK" -ne "0" ]; then echo "Verification failed!"; exit 1; done
$ docker run lightninglabs/lnd [command-line options]
Users are able to rebuild the target release themselves without having to fetch any of the dependencies. In order to do so, assuming
that vendor.tar.gz and lnd-source-v0.17.4-beta.rc1.tar.gz are in the current directory, follow these steps:
tar -xvzf vendor.tar.gz
tar -xvzf lnd-source-v0.17.4-beta.rc1.tar.gz
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.4-beta.rc1" ./cmd/lnd
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.4-beta.rc1" ./cmd/lncli
The -mod=vendor flag tells the go build command that it doesn't need to fetch the dependencies, and instead, they're all enclosed in the local vendor directory.
Additionally, it's now possible to use the enclosed release.sh script to bundle a release for a specific system like so:
make release sys="linux-arm64 darwin-amd64"
⚡️⚡️⚡️ OK, now to the rest of the release notes! ⚡️⚡️⚡️
This is a hot fix release that fixes multiple concurrency and memory related bugs. Memory consumption for lnd nodes running with bitcoind using the rpcpolling has been significantly reduced (previously scaled with total mempool size).
In order to verify the release, you'll need to have gpg or gpg2 installed on your system. Once you've obtained a copy (and hopefully verified that as well), you'll first need to import the keys that have signed this release if you haven't done so already:
curl https://raw.githubusercontent.com/lightningnetwork/lnd/master/scripts/keys/roasbeef.asc | gpg --import
Once you have the required PGP keys, you can verify the release (assuming manifest-roasbeef-v0.17.3-beta.sig and manifest-v0.17.3-beta.txt are in the current directory) with:
gpg --verify manifest-roasbeef-v0.17.3-beta.sig manifest-v0.17.3-beta.txt
You should see the following if the verification was successful:
gpg: Signature made Wed Dec 6 13:24:12 2023 PST
gpg: using RSA key 60A1FA7DA5BFF08BDCBBE7903BBD59E99B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>" [ultimate]
That will verify the signature of the manifest file, which ensures integrity and authenticity of the archive you've downloaded locally containing the binaries. Next, depending on your operating system, you should then re-compute the sha256 hash of the archive with shasum -a 256 <filename>, compare it with the corresponding one in the manifest file, and ensure they match exactly.
From this new version onwards, in addition time-stamping the git tag with OpenTimestamps, we'll also now timestamp the manifest file along with its signature. Two new files are now included along with the rest of our release artifacts: manifest-roasbeef-v0.17.3-beta.txt.asc.ots.
Assuming you have the opentimestamps client installed locally, the timestamps can be verified with the following commands:
ots verify manifest-roasbeef-v0.17.3-beta.sig.ots -f manifest-roasbeef-v0.17.3-beta.sig
Alternatively, the OpenTimestamps website can be used to verify timestamps if one doesn't have a bitcoind instance accessible locally.
These timestamps should give users confidence in the integrity of this release even after the key that signed the release expires.
Our release binaries are fully reproducible. Third parties are able to verify that the release binaries were produced properly without having to trust the release manager(s). See our reproducible builds guide for how this can be achieved.
The release binaries are compiled with go1.21.0, which is required by verifiers to arrive at the same ones.
They include the following build tags: autopilotrpc, signrpc, walletrpc, chainrpc, invoicesrpc, neutrinorpc, routerrpc, watchtowerrpc, monitoring, peersrpc, kvdb_postrgres, kvdb_etcd and kvdb_sqlite. Note that these are already included in the release script, so they do not need to be provided.
The make release command can be used to ensure one rebuilds with all the same flags used for the release. If one wishes to build for only a single platform, then make release sys=<OS-ARCH> tag=<tag> can be used.
Finally, you can also verify the tag itself with the following command:
$ git verify-tag v0.17.3-beta
gpg: Signature made Tue 05 Dec 2023 04:38:50 PM PST
gpg: using RSA key 60A1FA7DA5BFF08BDCBBE7903BBD59E99B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>" [ultimate]
To verify the lnd and lncli binaries inside the docker images against the signed, reproducible release binaries, there is a verification script in the image that can be called (before starting the container for example):
$ docker run --rm --entrypoint="" lightninglabs/lnd:v0.17.3-beta /verify-install.sh v0.17.3-beta
$ OK=$?
$ if [ "$OK" -ne "0" ]; then echo "Verification failed!"; exit 1; done
$ docker run lightninglabs/lnd [command-line options]
Users are able to rebuild the target release themselves without having to fetch any of the dependencies. In order to do so, assuming
that vendor.tar.gz and lnd-source-v0.17.3-beta.tar.gz are in the current directory, follow these steps:
tar -xvzf vendor.tar.gz
tar -xvzf lnd-source-v0.17.3-beta.tar.gz
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.3-beta" ./cmd/lnd
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.3-beta" ./cmd/lncli
The -mod=vendor flag tells the go build command that it doesn't need to fetch the dependencies, and instead, they're all enclosed in the local vendor directory.
Additionally, it's now possible to use the enclosed release.sh script to bundle a release for a specific system like so:
make release sys="linux-arm64 darwin-amd64"
⚡️⚡️⚡️ OK, now to the rest of the release notes! ⚡️⚡️⚡️
https://github.com/lightningnetwork/lnd/blob/v0.17.3-beta/docs/release-notes/release-notes-0.17.3.md
This is a hot fix release that fixes multiple concurrency and memory related bugs.
In order to verify the release, you'll need to have gpg or gpg2 installed on your system. Once you've obtained a copy (and hopefully verified that as well), you'll first need to import the keys that have signed this release if you haven't done so already:
curl https://raw.githubusercontent.com/lightningnetwork/lnd/master/scripts/keys/roasbeef.asc | gpg --import
Once you have the required PGP keys, you can verify the release (assuming manifest-roasbeef-v0.17.3-beta.rc1.sig and manifest-v0.17.3-beta.rc1.txt are in the current directory) with:
gpg --verify manifest-roasbeef-v0.17.3-beta.rc1.sig manifest-v0.17.3-beta.rc1.txt
You should see the following if the verification was successful:
gpg: Signature made Wed Sep 30 17:35:20 2020 PDT
gpg: using RSA key 60A1FA7DA5BFF08BDCBBE7903BBD59E99B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>" [ultimate]
That will verify the signature of the manifest file, which ensures integrity and authenticity of the archive you've downloaded locally containing the binaries. Next, depending on your operating system, you should then re-compute the sha256 hash of the archive with shasum -a 256 <filename>, compare it with the corresponding one in the manifest file, and ensure they match exactly.
From this new version onwards, in addition time-stamping the git tag with OpenTimestamps, we'll also now timestamp the manifest file along with its signature. Two new files are now included along with the rest of our release artifacts: manifest-roasbeef-v0.17.3-beta.rc1.txt.asc.ots.
Assuming you have the opentimestamps client installed locally, the timestamps can be verified with the following commands:
ots verify manifest-roasbeef-v0.17.3-beta.rc1.sig.ots -f manifest-roasbeef-v0.17.3-beta.rc1.sig
Alternatively, the OpenTimestamps website can be used to verify timestamps if one doesn't have a bitcoind instance accessible locally.
These timestamps should give users confidence in the integrity of this release even after the key that signed the release expires.
Our release binaries are fully reproducible. Third parties are able to verify that the release binaries were produced properly without having to trust the release manager(s). See our reproducible builds guide for how this can be achieved.
The release binaries are compiled with go1.21.0, which is required by verifiers to arrive at the same ones.
They include the following build tags: autopilotrpc, signrpc, walletrpc, chainrpc, invoicesrpc, neutrinorpc, routerrpc, watchtowerrpc, monitoring, peersrpc, kvdb_postrgres, kvdb_etcd and kvdb_sqlite. Note that these are already included in the release script, so they do not need to be provided.
The make release command can be used to ensure one rebuilds with all the same flags used for the release. If one wishes to build for only a single platform, then make release sys=<OS-ARCH> tag=<tag> can be used.
Finally, you can also verify the tag itself with the following command:
$ git verify-tag v0.17.3-beta.rc1
gpg: Signature made Tue Sep 15 18:55:00 2020 PDT
gpg: using RSA key 60A1FA7DA5BFF08BDCBBE7903BBD59E99B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>" [ultimate]
To verify the lnd and lncli binaries inside the docker images against the signed, reproducible release binaries, there is a verification script in the image that can be called (before starting the container for example):
$ docker run --rm --entrypoint="" lightninglabs/lnd:v0.17.3-beta.rc1 /verify-install.sh v0.17.3-beta.rc1
$ OK=$?
$ if [ "$OK" -ne "0" ]; then echo "Verification failed!"; exit 1; done
$ docker run lightninglabs/lnd [command-line options]
Users are able to rebuild the target release themselves without having to fetch any of the dependencies. In order to do so, assuming
that vendor.tar.gz and lnd-source-v0.17.3-beta.rc1.tar.gz are in the current directory, follow these steps:
tar -xvzf vendor.tar.gz
tar -xvzf lnd-source-v0.17.3-beta.rc1.tar.gz
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.3-beta.rc1" ./cmd/lnd
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.3-beta.rc1" ./cmd/lncli
The -mod=vendor flag tells the go build command that it doesn't need to fetch the dependencies, and instead, they're all enclosed in the local vendor directory.
Additionally, it's now possible to use the enclosed release.sh script to bundle a release for a specific system like so:
make release sys="linux-arm64 darwin-amd64"
⚡️⚡️⚡️ OK, now to the rest of the release notes! ⚡️⚡️⚡️
This is a hot fix release to fix a concurrency related bug in the peer/server that could lead to a panic. The only change included in this release is: https://github.com/lightningnetwork/lnd/pull/8186.
In order to verify the release, you'll need to have gpg or gpg2 installed on your system. Once you've obtained a copy (and hopefully verified that as well), you'll first need to import the keys that have signed this release if you haven't done so already:
curl https://raw.githubusercontent.com/lightningnetwork/lnd/master/scripts/keys/roasbeef.asc | gpg --import
Once you have the required PGP keys, you can verify the release (assuming manifest-roasbeef-v0.17.2-beta.sig and manifest-v0.17.2-beta.txt are in the current directory) with:
gpg --verify manifest-roasbeef-v0.17.2-beta.sig manifest-v0.17.2-beta.txt
You should see the following if the verification was successful:
gpg: Signature made Mon Nov 20 18:56:09 2023 CST
gpg: using RSA key 60A1FA7DA5BFF08BDCBBE7903BBD59E99B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>" [ultimate]
That will verify the signature of the manifest file, which ensures integrity and authenticity of the archive you've downloaded locally containing the binaries. Next, depending on your operating system, you should then re-compute the sha256 hash of the archive with shasum -a 256 <filename>, compare it with the corresponding one in the manifest file, and ensure they match exactly.
From this new version onwards, in addition time-stamping the git tag with OpenTimestamps, we'll also now timestamp the manifest file along with its signature. Two new files are now included along with the rest of our release artifacts: manifest-roasbeef-v0.17.2-beta.txt.asc.ots.
Assuming you have the opentimestamps client installed locally, the timestamps can be verified with the following commands:
ots verify manifest-roasbeef-v0.17.2-beta.sig.ots -f manifest-roasbeef-v0.17.2-beta.sig
Alternatively, the OpenTimestamps website can be used to verify timestamps if one doesn't have a bitcoind instance accessible locally.
These timestamps should give users confidence in the integrity of this release even after the key that signed the release expires.
Our release binaries are fully reproducible. Third parties are able to verify that the release binaries were produced properly without having to trust the release manager(s). See our reproducible builds guide for how this can be achieved.
The release binaries are compiled with go1.21.0, which is required by verifiers to arrive at the same ones.
They include the following build tags: autopilotrpc, signrpc, walletrpc, chainrpc, invoicesrpc, neutrinorpc, routerrpc, watchtowerrpc, monitoring, peersrpc, kvdb_postrgres, kvdb_etcd and kvdb_sqlite. Note that these are already included in the release script, so they do not need to be provided.
The make release command can be used to ensure one rebuilds with all the same flags used for the release. If one wishes to build for only a single platform, then make release sys=<OS-ARCH> tag=<tag> can be used.
Finally, you can also verify the tag itself with the following command:
$ git verify-tag v0.17.2-beta
gpg: Signature made Mon 20 Nov 2023 12:32:30 PM PST
gpg: using RSA key 60A1FA7DA5BFF08BDCBBE7903BBD59E99B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>" [ultimate]
To verify the lnd and lncli binaries inside the docker images against the signed, reproducible release binaries, there is a verification script in the image that can be called (before starting the container for example):
$ docker run --rm --entrypoint="" lightninglabs/lnd:v0.17.2-beta /verify-install.sh v0.17.2-beta
$ OK=$?
$ if [ "$OK" -ne "0" ]; then echo "Verification failed!"; exit 1; done
$ docker run lightninglabs/lnd [command-line options]
Users are able to rebuild the target release themselves without having to fetch any of the dependencies. In order to do so, assuming
that vendor.tar.gz and lnd-source-v0.17.2-beta.tar.gz are in the current directory, follow these steps:
tar -xvzf vendor.tar.gz
tar -xvzf lnd-source-v0.17.2-beta.tar.gz
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.2-beta" ./cmd/lnd
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.2-beta" ./cmd/lncli
The -mod=vendor flag tells the go build command that it doesn't need to fetch the dependencies, and instead, they're all enclosed in the local vendor directory.
Additionally, it's now possible to use the enclosed release.sh script to bundle a release for a specific system like so:
make release sys="linux-arm64 darwin-amd64"
⚡️⚡️⚡️ OK, now to the rest of the release notes! ⚡️⚡️⚡️
https://github.com/lightningnetwork/lnd/blob/v0.17.2-beta/docs/release-notes/release-notes-0.17.2.md
This marks the first minor release in the 0.17.x cycle. This release includes a number of bug fixes and optimizations, including: a reduction in CPU utilization due to the new mempool scanning safety logic, enchantments to the CPFP logic for anchor outputs, a fix to a peer/server deadlock, and a bug fix for the new taproot channel type that may have otherwise caused a channel to show as inactive until reconnection.
In order to verify the release, you'll need to have gpg or gpg2 installed on your system. Once you've obtained a copy (and hopefully verified that as well), you'll first need to import the keys that have signed this release if you haven't done so already:
curl https://raw.githubusercontent.com/lightningnetwork/lnd/master/scripts/keys/roasbeef.asc | gpg --import
Once you have the required PGP keys, you can verify the release (assuming manifest-roasbeef-v0.17.1-beta.sig and manifest-v0.17.1-beta.txt are in the current directory) with:
gpg --verify manifest-roasbeef-v0.17.1-beta.sig manifest-v0.17.1-beta.txt
You should see the following if the verification was successful:
gpg: Signature made Mon Nov 13 15:45:38 2023 PST
gpg: using RSA key 60A1FA7DA5BFF08BDCBBE7903BBD59E99B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>" [ultimate]
That will verify the signature of the manifest file, which ensures integrity and authenticity of the archive you've downloaded locally containing the binaries. Next, depending on your operating system, you should then re-compute the sha256 hash of the archive with shasum -a 256 <filename>, compare it with the corresponding one in the manifest file, and ensure they match exactly.
From this new version onwards, in addition time-stamping the git tag with OpenTimestamps, we'll also now timestamp the manifest file along with its signature. Two new files are now included along with the rest of our release artifacts: manifest-roasbeef-v0.17.1-beta.txt.asc.ots.
Assuming you have the opentimestamps client installed locally, the timestamps can be verified with the following commands:
ots verify manifest-roasbeef-v0.17.1-beta.sig.ots -f manifest-roasbeef-v0.17.1-beta.sig
Alternatively, the OpenTimestamps website can be used to verify timestamps if one doesn't have a bitcoind instance accessible locally.
These timestamps should give users confidence in the integrity of this release even after the key that signed the release expires.
Our release binaries are fully reproducible. Third parties are able to verify that the release binaries were produced properly without having to trust the release manager(s). See our reproducible builds guide for how this can be achieved.
The release binaries are compiled with go1.21.0, which is required by verifiers to arrive at the same ones.
They include the following build tags: autopilotrpc, signrpc, walletrpc, chainrpc, invoicesrpc, neutrinorpc, routerrpc, watchtowerrpc, monitoring, peersrpc, kvdb_postrgres, kvdb_etcd and kvdb_sqlite. Note that these are already included in the release script, so they do not need to be provided.
The make release command can be used to ensure one rebuilds with all the same flags used for the release. If one wishes to build for only a single platform, then make release sys=<OS-ARCH> tag=<tag> can be used.
Finally, you can also verify the tag itself with the following command:
$ git verify-tag v0.17.1-beta
gpg: Signature made Mon 13 Nov 2023 11:13:31 AM PST
gpg: using RSA key 60A1FA7DA5BFF08BDCBBE7903BBD59E99B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>" [ultimate]
To verify the lnd and lncli binaries inside the docker images against the signed, reproducible release binaries, there is a verification script in the image that can be called (before starting the container for example):
$ docker run --rm --entrypoint="" lightninglabs/lnd:v0.17.1-beta /verify-install.sh v0.17.1-beta
$ OK=$?
$ if [ "$OK" -ne "0" ]; then echo "Verification failed!"; exit 1; done
$ docker run lightninglabs/lnd [command-line options]
Users are able to rebuild the target release themselves without having to fetch any of the dependencies. In order to do so, assuming
that vendor.tar.gz and lnd-source-v0.17.1-beta.tar.gz are in the current directory, follow these steps:
tar -xvzf vendor.tar.gz
tar -xvzf lnd-source-v0.17.1-beta.tar.gz
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.1-beta" ./cmd/lnd
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.1-beta" ./cmd/lncli
The -mod=vendor flag tells the go build command that it doesn't need to fetch the dependencies, and instead, they're all enclosed in the local vendor directory.
Additionally, it's now possible to use the enclosed release.sh script to bundle a release for a specific system like so:
make release sys="linux-arm64 darwin-amd64"
⚡️⚡️⚡️ OK, now to the rest of the release notes! ⚡️⚡️⚡️
This marks the first minor release in the 0.17.x cycle. This release includes a number of bug fixes and optimizations, including: a reduction in CPU utilization due to the new mempool scanning safety logic, enchantments to the CPFP logic for anchor outputs, and a bug fix for the new taproot channel type that may have otherwise caused a channel to show as inactive until reconnection.
There are no database migrations in this release.
In order to verify the release, you'll need to have gpg or gpg2 installed on your system. Once you've obtained a copy (and hopefully verified that as well), you'll first need to import the keys that have signed this release if you haven't done so already:
curl https://raw.githubusercontent.com/lightningnetwork/lnd/master/scripts/keys/roasbeef.asc | gpg --import
Once you have the required PGP keys, you can verify the release (assuming manifest-roasbeef-v0.17.1-beta.rc1.sig and manifest-v0.17.1-beta.rc1.txt are in the current directory) with:
gpg --verify manifest-roasbeef-v0.17.1-beta.rc1.sig manifest-v0.17.1-beta.rc1.txt
You should see the following if the verification was successful:
gpg: Signature made Thu Nov 2 11:00:40 2023 PDT
gpg: using RSA key 60A1FA7DA5BFF08BDCBBE7903BBD59E99B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>" [ultimate]
That will verify the signature of the manifest file, which ensures integrity and authenticity of the archive you've downloaded locally containing the binaries. Next, depending on your operating system, you should then re-compute the sha256 hash of the archive with shasum -a 256 <filename>, compare it with the corresponding one in the manifest file, and ensure they match exactly.
From this new version onwards, in addition time-stamping the git tag with OpenTimestamps, we'll also now timestamp the manifest file along with its signature. Two new files are now included along with the rest of our release artifacts: manifest-roasbeef-v0.17.1-beta.rc1.txt.asc.ots.
Assuming you have the opentimestamps client installed locally, the timestamps can be verified with the following commands:
ots verify manifest-roasbeef-v0.17.1-beta.rc1.sig.ots -f manifest-roasbeef-v0.17.1-beta.rc1.sig
Alternatively, the OpenTimestamps website can be used to verify timestamps if one doesn't have a bitcoind instance accessible locally.
These timestamps should give users confidence in the integrity of this release even after the key that signed the release expires.
Our release binaries are fully reproducible. Third parties are able to verify that the release binaries were produced properly without having to trust the release manager(s). See our reproducible builds guide for how this can be achieved.
The release binaries are compiled with go1.21.0, which is required by verifiers to arrive at the same ones.
They include the following build tags: autopilotrpc, signrpc, walletrpc, chainrpc, invoicesrpc, neutrinorpc, routerrpc, watchtowerrpc, monitoring, peersrpc, kvdb_postrgres, kvdb_etcd and kvdb_sqlite. Note that these are already included in the release script, so they do not need to be provided.
The make release command can be used to ensure one rebuilds with all the same flags used for the release. If one wishes to build for only a single platform, then make release sys=<OS-ARCH> tag=<tag> can be used.
Finally, you can also verify the tag itself with the following command:
$ git verify-tag v0.17.1-beta.rc1
gpg: Signature made Wed 01 Nov 2023 03:28:32 PM PDT
gpg: using RSA key 60A1FA7DA5BFF08BDCBBE7903BBD59E99B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>" [ultimate]
To verify the lnd and lncli binaries inside the docker images against the signed, reproducible release binaries, there is a verification script in the image that can be called (before starting the container for example):
$ docker run --rm --entrypoint="" lightninglabs/lnd:v0.17.1-beta.rc1 /verify-install.sh v0.17.1-beta.rc1
$ OK=$?
$ if [ "$OK" -ne "0" ]; then echo "Verification failed!"; exit 1; done
$ docker run lightninglabs/lnd [command-line options]
Users are able to rebuild the target release themselves without having to fetch any of the dependencies. In order to do so, assuming
that vendor.tar.gz and lnd-source-v0.17.1-beta.rc1.tar.gz are in the current directory, follow these steps:
tar -xvzf vendor.tar.gz
tar -xvzf lnd-source-v0.17.1-beta.rc1.tar.gz
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.1-beta.rc1" ./cmd/lnd
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.1-beta.rc1" ./cmd/lncli
The -mod=vendor flag tells the go build command that it doesn't need to fetch the dependencies, and instead, they're all enclosed in the local vendor directory.
Additionally, it's now possible to use the enclosed release.sh script to bundle a release for a specific system like so:
make release sys="linux-arm64 darwin-amd64"
⚡️⚡️⚡️ OK, now to the rest of the release notes! ⚡️⚡️⚡️
There is a single database migration in this release. This migration deletes some space on disk that previously stored the last sweep transaction in the sweeper.
In order to verify the release, you'll need to have gpg or gpg2 installed on your system. Once you've obtained a copy (and hopefully verified that as well), you'll first need to import the keys that have signed this release if you haven't done so already:
curl https://raw.githubusercontent.com/lightningnetwork/lnd/master/scripts/keys/roasbeef.asc | gpg --import
Once you have the required PGP keys, you can verify the release (assuming manifest-roasbeef-v0.17.0-beta.sig and manifest-v0.17.0-beta.txt are in the current directory) with:
gpg --verify manifest-roasbeef-v0.17.0-beta.sig manifest-v0.17.0-beta.txt
You should see the following if the verification was successful:
gpg: Signature made Tue Oct 3 11:03:53 2023 PDT
gpg: using RSA key 60A1FA7DA5BFF08BDCBBE7903BBD59E99B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>" [ultimate]
That will verify the signature of the manifest file, which ensures integrity and authenticity of the archive you've downloaded locally containing the binaries. Next, depending on your operating system, you should then re-compute the sha256 hash of the archive with shasum -a 256 <filename>, compare it with the corresponding one in the manifest file, and ensure they match exactly.
From this new version onwards, in addition time-stamping the git tag with OpenTimestamps, we'll also now timestamp the manifest file along with its signature. Two new files are now included along with the rest of our release artifacts: manifest-roasbeef-v0.17.0-beta.txt.asc.ots.
Assuming you have the opentimestamps client installed locally, the timestamps can be verified with the following commands:
ots verify manifest-roasbeef-v0.17.0-beta.sig.ots -f manifest-roasbeef-v0.17.0-beta.sig
Alternatively, the OpenTimestamps website can be used to verify timestamps if one doesn't have a bitcoind instance accessible locally.
These timestamps should give users confidence in the integrity of this release even after the key that signed the release expires.
Our release binaries are fully reproducible. Third parties are able to verify that the release binaries were produced properly without having to trust the release manager(s). See our reproducible builds guide for how this can be achieved.
The release binaries are compiled with go1.21.0, which is required by verifiers to arrive at the same ones.
They include the following build tags: autopilotrpc, signrpc, walletrpc, chainrpc, invoicesrpc, neutrinorpc, routerrpc, watchtowerrpc, monitoring, peersrpc, kvdb_postrgres, kvdb_etcd and kvdb_sqlite. Note that these are already included in the release script, so they do not need to be provided.
The make release command can be used to ensure one rebuilds with all the same flags used for the release. If one wishes to build for only a single platform, then make release sys=<OS-ARCH> tag=<tag> can be used.
Finally, you can also verify the tag itself with the following command:
$ git verify-tag v0.17.0-beta
gpg: Signature made Tue 03 Oct 2023 05:22:22 PM UTC using RSA key ID 9B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>"
To verify the lnd and lncli binaries inside the docker images against the signed, reproducible release binaries, there is a verification script in the image that can be called (before starting the container for example):
$ docker run --rm --entrypoint="" lightninglabs/lnd:v0.17.0-beta /verify-install.sh v0.17.0-beta
$ OK=$?
$ if [ "$OK" -ne "0" ]; then echo "Verification failed!"; exit 1; done
$ docker run lightninglabs/lnd [command-line options]
Users are able to rebuild the target release themselves without having to fetch any of the dependencies. In order to do so, assuming
that vendor.tar.gz and lnd-source-v0.17.0-beta.tar.gz are in the current directory, follow these steps:
tar -xvzf vendor.tar.gz
tar -xvzf lnd-source-v0.17.0-beta.tar.gz
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.0-beta" ./cmd/lnd
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.0-beta" ./cmd/lncli
The -mod=vendor flag tells the go build command that it doesn't need to fetch the dependencies, and instead, they're all enclosed in the local vendor directory.
Additionally, it's now possible to use the enclosed release.sh script to bundle a release for a specific system like so:
make release sys="linux-arm64 darwin-amd64"
⚡️⚡️⚡️ OK, now to the rest of the release notes! ⚡️⚡️⚡️
https://github.com/lightningnetwork/lnd/blob/master/docs/release-notes/release-notes-0.17.0.md
There is a single database migration in this release. This migration deletes some space on disk that previously stored the last sweep transaction in the sweeper.
In order to verify the release, you'll need to have gpg or gpg2 installed on your system. Once you've obtained a copy (and hopefully verified that as well), you'll first need to import the keys that have signed this release if you haven't done so already:
curl https://raw.githubusercontent.com/lightningnetwork/lnd/master/scripts/keys/roasbeef.asc | gpg --import
Once you have the required PGP keys, you can verify the release (assuming manifest-roasbeef-v0.17.0-beta.rc6.sig and manifest-v0.17.0-beta.rc6.txt are in the current directory) with:
gpg --verify manifest-roasbeef-v0.17.0-beta.rc6.sig manifest-v0.17.0-beta.rc6.txt
You should see the following if the verification was successful:
gpg: Signature made Thu Sep 28 17:17:54 2023 CDT
gpg: using RSA key 60A1FA7DA5BFF08BDCBBE7903BBD59E99B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>" [ultimate]
That will verify the signature of the manifest file, which ensures integrity and authenticity of the archive you've downloaded locally containing the binaries. Next, depending on your operating system, you should then re-compute the sha256 hash of the archive with shasum -a 256 <filename>, compare it with the corresponding one in the manifest file, and ensure they match exactly.
From this new version onwards, in addition time-stamping the git tag with OpenTimestamps, we'll also now timestamp the manifest file along with its signature. Two new files are now included along with the rest of our release artifacts: manifest-roasbeef-v0.17.0-beta.rc6.txt.asc.ots.
Assuming you have the opentimestamps client installed locally, the timestamps can be verified with the following commands:
ots verify manifest-roasbeef-v0.17.0-beta.rc6.sig.ots -f manifest-roasbeef-v0.17.0-beta.rc6.sig
Alternatively, the OpenTimestamps website can be used to verify timestamps if one doesn't have a bitcoind instance accessible locally.
These timestamps should give users confidence in the integrity of this release even after the key that signed the release expires.
Our release binaries are fully reproducible. Third parties are able to verify that the release binaries were produced properly without having to trust the release manager(s). See our reproducible builds guide for how this can be achieved.
The release binaries are compiled with go1.21.0, which is required by verifiers to arrive at the same ones.
They include the following build tags: autopilotrpc, signrpc, walletrpc, chainrpc, invoicesrpc, neutrinorpc, routerrpc, watchtowerrpc, monitoring, peersrpc, kvdb_postrgres, kvdb_etcd and kvdb_sqlite. Note that these are already included in the release script, so they do not need to be provided.
The make release command can be used to ensure one rebuilds with all the same flags used for the release. If one wishes to build for only a single platform, then make release sys=<OS-ARCH> tag=<tag> can be used.
Finally, you can also verify the tag itself with the following command:
$ git verify-tag v0.17.0-beta.rc6
gpg: Signature made Thu 28 Sep 2023 06:46:11 PM UTC using RSA key ID 9B280306
gpg: Good signature from "Olaoluwa Osuntokun <[email protected]>"
To verify the lnd and lncli binaries inside the docker images against the signed, reproducible release binaries, there is a verification script in the image that can be called (before starting the container for example):
$ docker run --rm --entrypoint="" lightninglabs/lnd:v0.17.0-beta.rc6 /verify-install.sh v0.17.0-beta.rc6
$ OK=$?
$ if [ "$OK" -ne "0" ]; then echo "Verification failed!"; exit 1; done
$ docker run lightninglabs/lnd [command-line options]
Users are able to rebuild the target release themselves without having to fetch any of the dependencies. In order to do so, assuming
that vendor.tar.gz and lnd-source-v0.17.0-beta.rc6.tar.gz are in the current directory, follow these steps:
tar -xvzf vendor.tar.gz
tar -xvzf lnd-source-v0.17.0-beta.rc6.tar.gz
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.0-beta.rc6" ./cmd/lnd
GO111MODULE=on go install -v -mod=vendor -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.17.0-beta.rc6" ./cmd/lncli
The -mod=vendor flag tells the go build command that it doesn't need to fetch the dependencies, and instead, they're all enclosed in the local vendor directory.
Additionally, it's now possible to use the enclosed release.sh script to bundle a release for a specific system like so:
make release sys="linux-arm64 darwin-amd64"
⚡️⚡️⚡️ OK, now to the rest of the release notes! ⚡️⚡️⚡️
https://github.com/lightningnetwork/lnd/blob/master/docs/release-notes/release-notes-0.17.0.md