Antmicro Jetson Nano Baseboard Versions Save

Antmicro's open hardware baseboard for the NVIDIA Jetson Nano, TX2 NX and Xavier NX

v1.4.6

3 years ago
  • Changed the DC power jack
  • Changed the J7 CSI FFC connector into top-sided for better coverage of the matching accessories

v1.4.2

4 years ago
  • Introduced an 8-layer PCB stackup for a better separation of PCIe lanes
  • Rotated the M.2 connector by 180 degrees to keep it away from the on-board DC/DC
  • Changed the stacking height of the M.2 connector
  • Simplified the M.2 supporting circuitry
  • Exposed the CSI-G and PCIE1 interfaces on the Jetson Xavier NX
  • Updated FAN control circuitry
  • Changed GPIO assignment for camera-triggering signals
  • Optimized board cutout for the DisplayPort connector
  • Fine-tuned selected footprints to improve the reliability of the reflow soldering
  • Changed power sequencing of the on-board DC/DC converters
  • Fixed TPD8S009 footprint
  • Removed MicroSD card socket
  • Updated USBC_VBUS control circuitry
  • Added EEPROM for SN/ID storage

v1.2

4 years ago
  • Updated the on-board SO-DIMM pinout and associated circuitry to match the Jetson Nano production module

v1.3

4 years ago
  • Added M.2 (key M) interface connector
  • Added MicroSD card slot
  • Updated RC timing circuit in power sequencer
  • Updated DC/DC providing the 3V3_SYS on-board power supply
  • Added triggering signals to the camera interface connectors

v1.1

4 years ago
  • Updated hotplug circuitry for USB-C and DisplayPort interfaces
  • Updated bulk capacitances and pull-up resistors after bring-up of the initial prototype