Install-Flash-Chip-Mac

Unsupported on Mac OS 1.13+

Ready to use environment to Flash your C.H.I.P Single Board Computer on MacOS

Simplyfies the Flashing Process for the C.H.I.P and PocketC.H.I.P Computer.

Special Thanks to Nerten

https://github.com/Nerten

I dont know if i would finished this Work without him.

Instructions

1. Remove the C.H.I.P from its case (in case you have a Pocket C.H.I.P).
2. Connect the FEL and a GROUND pin of the C.H.I.P (for example, with a paperclip).
3. Connect the C.H.I.P its micro USB port to a USB port of your Linux machine.
4. On the Mac:
   • run git clone https://github.com/Thore-Krug/Install-Flash-Chip-Mac to clone this repository. ( Or use Github Desktop )
   • cd into the location where you stored this repository.
   • run sudo chmod +x Flasher.sh
   • ./Flasher.sh help will give out the help
   • ./Flasher.sh install-all install all the things you need to Flash your C.H.I.P
   • ./Flasher.sh flash Will Flash your C.H.I.P
   • Select the version you want to install.
   • Wait until the installation finishes.
   • Enjoy!

Troubleshooting

1. Kill the Script with ctrl + C
2. Read the output if something is not installed or Permissions are missing
3. Just restart the Script (fixes most of the Problem with FEL and Fastboot )
4. If this does not help reboot, retry
5. Open an Issue on this Git Repo.

Support my work by Donating

https://www.paypal.me/a13tech