FOC SOURCE CODE - Xilinx Vitis design flow Update

Date: 03.16.2020
The IIoT-EDDP Repository has been update to include new hardware support as well as Xilinx's latest design flow
Hardware support added: Ultra96 v1 and v2
Software support added: Xilinx Vitis https://www.xilinx.com/products/design-tools/vitis.html

SUPPORT

See the EDDP-EDPS Support Forum at http://trenz.org/EDDPsupport , please.

HARDWARE

ARTY Z7 7010 Based EDDP Kit

1. EDDP Motor Control Kit with Motor & Power Supplies - https://shop.trenz-electronic.de/en/TEC0053-04-K1-EDDP-Motor-Control-Kit-with-Motor-Power-Supplies

Ultra96 Version 1 or Ultra96 Version 2 Based EDDP Kit

1. PMOD adapter - https://shop.trenz-electronic.de/en/TEP0006-01-Ultra96-Pmod-Adapter
2. Power stage board - https://shop.trenz-electronic.de/en/TEC0053-04-EDPS-Power-Stage
3. BLDC Motor with mounted encoder - https://shop.trenz-electronic.de/en/28170-BLDC-Motor-with-mounted-Encoder-1000SI
4. Ultra96 V2 - https://www.avnet.com/shop/us/products/avnet-engineering-services/aes-ultra96-v2-g-3074457345638646173/
   Note: Ultra96 V1 has been discoutinued by Avnet but Vitis project for the same has been included in this repo to benefit user who own the version 1 hardware

QUICKSTART

Requirements:

1. TEC0053 with a motor, connected to desired board.
   (Pmod Adapter is needed if using Ultra96v1 or Ultra96v2)
2. Network connectivity, preferrably DHCP server.
3. Micro-USB cable and serial terminal program.
4. Web browser.

USB serial console parameters: baud rate 115200, 8 bits, no parity.

Steps to start motor:

1. Copy files from Vitis/app_arty_7z_10/preBuilt_sd_card to the SD card
2. Modify init.sh and focserver.conf to suit your needs.
3. Power up the board and note the IP address (either DHCP logs or serial console). If there are no DHCP server answering, default of 192.168.42.123 will be used after 10 second timeout.
4. Point a web browser to the IP address of the board. A FOC control panel appears.
5. Click button "Motor" to start the motor.
6. To enable live charts, enable checkbox "Live charts"

DIRECTORY LISTING

Directories are listed in alphabetical order.

IMPORTANT NOTES

• Some parameters can be changed only by changing the source code for the FOC Sample Application, most notably the encoder resolution and number of poles of the motor.
• The Petalinux project for the SDSoC version of the FOC implementation has to have the hardware definition file re-imported from the completed SDSoC Application Project when the hardware address for the FOC IP core changes.
• The embedded linux program "focserver" has to be modified accordingly and the Petalinux project has to be rebuilt after changing register layout in the FOC implementation.