Home Assistant Electrolux Care Integration (Not Official)
This is an integration to Home Assistant to communicate with the Electrolux Connectivity Platform (ECP), Electrolux owned brands, like: Electrolux, AEG, Frigidaire, Husqvarna.
Tested with Electrolux and AEG washer-dryer, but probably could be used with some internet connected ovens, diswashers, fridges, airconditioners.
Supported and tested devices
- ELECTROLUX EDH803BEWA - UltimateCare 800
- ELECTROLUX EW9H283BY - PerfectCare 900
- ELECTROLUX EWF1041ZDWA - UltimateCare 900 AutoDose
- ELECTROLUX EEM69410W - MaxiFlex 700
- ELECTROLUX EOD6P77WZ - SteamBake 600
- ELECTROLUX KODDP77WX - SteamBake 600
- ELECTROLUX EHE6799SA - 609L UltimateTaste 900
- ELECTROLUX EW9H869E9 - PerfectCare 900 Dryer
- ELECTROLUX EW9H188SPC - PerfectCare 900 Dryer
- ELECTROLUX EW8F8669Q8 - PerfectCare 800 Washer
- ELECTROLUX EW9F149SP - PerfectCare 900 Washer
- ELECTROLUX KEGB9300W - Dishwasher
- ELECTROLUX EEG69410W - Dishwasher
- AEG L6FBG841CA - 6000 Series Autodose
- AEG L7FENQ96 - 7000 Series ProSteam Autodose
- AEG L7FBE941Q - 7000 Series Prosense Autodose
- AEG L8FEC96QS - 8000 Series Ökomix Autodose
- AEG L9WBA61BC - 9000 Series ÖKOKombi DualSense SensiDry
- AEG BPE558370M - SteamBake 6000
- AEG FSE76738P - 7000 GlassCare
Prerequisites
All devices need configured and Alias set (otherwise the home assistant integration raises the authentication error) into following applications (depends on device type and region):
- My Electrolux Care/My AEG Care (EMEA region)
- Electrolux Kitchen/AEG Kitchen (EMEA region)
- Electrolux Life (APAC region)
- Electrolux Home+ (LATAM region)
- Electrolux Oven/Frigidaire 2.0 (NA region)
Installation
- Click install.
- In the HA UI go to "Configuration" -> "Integrations" click "+" and search for "Electrolux status".
- Insert the Electrolux Care Application credentials
Thanks
This integration uses the following Python Library:
Disclaimer
This Home Assistant integration was not made by Electrolux. It is not official, not developed, and not supported by Electrolux.
Support the project with a donation
This project is open source and free, but if you want to support us and help us continue to maintain and improve it, you can make a donation through PayPal.
Any contribution, no matter how small, is greatly appreciated and will help us keep the project active and healthy. Thank you for your support!