EthernetWebServer STM32 Save Abandoned

This is simple yet complete WebServer library for STM32 boards running built-in Ethernet LAN8742A (Nucleo-144, Discovery), ENC28J60 or W5x00 Ethernet shields. The functions are similar and compatible to ESP8266/ESP32 WebServer libraries to make life much easier to port sketches from ESP8266/ESP32. Ethernet_Generic library is used as default for W5x00. Now W5x00 can use any custom hardware / software SPI

Project README

EthernetWebServer_STM32

arduino-library-badge GitHub release GitHub contributions welcome GitHub issues

Donate to my libraries using BuyMeACoffee

Table of Contents

Important Note for STM32F boards using built-in LAN8742A Ethernet

This EthernetWebServer_STM32 Library, by design, is working synchronously. The Client requests must be handled by continuously checking in loop() using :

void loop()
{
  server.handleClient();
}

The new AsyncWebServer_STM32 Library, in contrast, is designed to work asynchronously. The Client requests are handled on demand, without continuously checking in loop(). The loop() now can be as simple as :

void loop()
{
}

Important Note for STM32F boards using built-in LAN8720 Ethernet

The support to LAN8720 for STM32F4, F7 (ARDUINO_BLACK_F407VE, ARDUINO_NUCLEO_H743ZI, etc.), has been broken by new STM32 core v2.3.0.

You have to use STM32 core v2.2.0 or v2.1.0, if it's necessary to use LAN8720 Ethernet

Currently Supported Boards by AsyncWebServer_STM32

  1. Nucleo-144 (F429ZI, F746ZG, F756ZG, F767ZI)
  2. Discovery STM32F746G-DISCOVERY
  3. Any STM32 boards with enough flash/memory and already configured to run LAN8742A Ethernet.

Why do we need the new Async AsyncWebServer_STM32 library

  • Using asynchronous network means that you can handle more than one connection at the same time
  • You are called once the request is ready and parsed
  • When you send the response, you are immediately ready to handle other connections while the server is taking care of sending the response in the background
  • Speed is OMG
  • Easy to use API, HTTP Basic and Digest MD5 Authentication (default), ChunkedResponse
  • Easily extensible to handle any type of content
  • Supports Continue 100
  • Async WebSocket plugin offering different locations without extra servers or ports
  • Async EventSource (Server-Sent Events) plugin to send events to the browser
  • URL Rewrite plugin for conditional and permanent url rewrites
  • ServeStatic plugin that supports cache, Last-Modified, default index and more
  • Simple template processing engine to handle templates

Why do we need this EthernetWebServer_STM32 library

Features

This EthernetWebServer_STM32 library is a simple yet complete WebServer library for STM32F/L/H/G/WB/MP1 boards using built-in Ethernet (Nucleo-144, Discovery), W5x00 or ENC28J60 Ethernet shields.

The functions are similar and compatible to those of ESP32 WebServer and ESP8266WebServer libraries to make life much easier to port sketches from ESP8266/ESP32.

This EthernetWebServer_STM32 library, from v1.1.0, also provides high-level HTTP and WebSocket Client with the functions are similar and compatible to those of ArduinoHttpClient Library

The EthernetWebServer_STM32 library supports:

  1. TCP Server and Client
  2. UDP Server and Client
  3. HTTP Server and Client
  4. HTTP GET and POST requests, provides argument parsing, handles one client at a time.
  5. High-level HTTP (GET, POST, PUT, PATCH, DELETE) and WebSocket Client. From v1.1.0.

Library is based on and modified from:

  1. Ivan Grokhotkov's ESP8266WebServer
  2. Ivan Grokhotkov's ESP32 WebServer
  3. ArduinoHttpClient Library

The EthernetWebServer class found in EthernetWebServer_STM32.h header, is a simple web server that knows how to handle HTTP requests such as GET and POST and can only support one simultaneous client.

Check EthernetWebServer Library Issue: Support for STM32F Series for reason to create this separate library from EthernetWebServer library

Currently supported Boards

  1. STM32 boards with built-in Ethernet LAN8742A such as :
  1. STM32F/L/H/G/WB/MP1 boards (with 32+K Flash) running W5x00 or ENC28J60 shields)
  • Nucleo-144
  • Nucleo-64
  • Discovery
  • Generic STM32F0, STM32F1, STM32F2, STM32F3, STM32F4, STM32F7 (with 64+K Flash): x8 and up
  • STM32L0, STM32L1, STM32L4, STM32L5
  • STM32G0, STM32G4
  • STM32H7
  • STM32WB
  • STM32MP1
  • LoRa boards
  • 3-D printer boards
  • Generic Flight Controllers
  • Midatronics boards
  1. STM32 boards using Ethernet LAN8720 such as :
  • Nucleo-144 (F429ZI, NUCLEO_F746NG, NUCLEO_F746ZG, NUCLEO_F756ZG)
  • Discovery (DISCO_F746NG)
  • STM32F4 boards (BLACK_F407VE, BLACK_F407VG, BLACK_F407ZE, BLACK_F407ZG, BLACK_F407VE_Mini, DIYMORE_F407VGT, FK407M1)

Currently supported Ethernet shields/modules

  1. W5x00 using Ethernet_Generic library

  2. W5x00 using Ethernet, EthernetLarge, Ethernet2 or Ethernet3 library

  3. ENC28J60 using new EthernetENC or UIPEthernet library

  4. LAN8720 using new STM32Ethernet and LwIP libraries.

Prerequisites

  1. Arduino IDE 1.8.19+ for Arduino. GitHub release
  2. Arduino Core for STM32 v2.3.0+ for STM32 boards. GitHub release. Check Important Note for STM32F boards using built-in LAN8720 Ethernet
  3. Functional-Vlpp library v1.0.2+ to use server's lambda function. To install. check arduino-library-badge
  4. For built-in LAN8742A or LAN8720 Ethernet:
  1. For W5x00 Ethernet:
  1. For ENC28J60 Ethernet:

Installation

Use Arduino Library Manager

The best way is to use Arduino Library Manager. Search for EthernetWebServer_STM32, then select / install the latest version. You can also use this link arduino-library-badge for more detailed instructions.

Manual Install

  1. Navigate to EthernetWebServer_STM32 page.
  2. Download the latest release EthernetWebServer_STM32-master.zip.
  3. Extract the zip file to EthernetWebServer_STM32-master directory
  4. Copy whole
  • EthernetWebServer_STM32-master folder to Arduino libraries' directory such as ~/Arduino/libraries/.

VS Code & PlatformIO:

  1. Install VS Code
  2. Install PlatformIO
  3. Install EthernetWebServer_STM32 library by using Library Manager. Search for EthernetWebServer_STM32 in Platform.io Author's Libraries
  4. Use included platformio.ini file from examples to ensure that all dependent libraries will installed automatically. Please visit documentation for the other options and examples at Project Configuration File

Packages' Patches

1. For STM32 boards to use LAN8720

To use LAN8720 on some STM32 boards

  • Nucleo-144 (F429ZI, NUCLEO_F746NG, NUCLEO_F746ZG, NUCLEO_F756ZG)
  • Discovery (DISCO_F746NG)
  • STM32F4 boards (BLACK_F407VE, BLACK_F407VG, BLACK_F407ZE, BLACK_F407ZG, BLACK_F407VE_Mini, DIYMORE_F407VGT, FK407M1)

you have to copy the files stm32f4xx_hal_conf_default.h and stm32f7xx_hal_conf_default.h into STM32 stm32 directory (~/.arduino15/packages/STM32/hardware/stm32/2.3.0/system) to overwrite the old files.

Supposing the STM32 stm32 core version is 2.3.0. These files must be copied into the directory:

  • ~/.arduino15/packages/STM32/hardware/stm32/2.3.0/system/STM32F4xx/stm32f4xx_hal_conf_default.h for STM32F4.
  • ~/.arduino15/packages/STM32/hardware/stm32/2.3.0/system/STM32F7xx/stm32f7xx_hal_conf_default.h for Nucleo-144 STM32F7.

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz, these files must be copied into the corresponding directory:

  • ~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/system/STM32F4xx/stm32f4xx_hal_conf_default.h
  • `~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/system/STM32F7xx/stm32f7xx_hal_conf_default.h

2. For STM32 boards to use Serial1

To use Serial1 on some STM32 boards without Serial1 definition (Nucleo-144 NUCLEO_F767ZI, Nucleo-64 NUCLEO_L053R8, etc.) boards, you have to copy the files STM32 variant.h into STM32 stm32 directory (~/.arduino15/packages/STM32/hardware/stm32/2.3.0). You have to modify the files corresponding to your boards, this is just an illustration how to do.

Supposing the STM32 stm32 core version is 2.3.0. These files must be copied into the directory:

  • ~/.arduino15/packages/STM32/hardware/stm32/2.3.0/variants/STM32F7xx/F765Z(G-I)T_F767Z(G-I)T_F777ZIT/NUCLEO_F767ZI/variant.h for Nucleo-144 NUCLEO_F767ZI.
  • ~/.arduino15/packages/STM32/hardware/stm32/2.3.0/variants/STM32L0xx/L052R(6-8)T_L053R(6-8)T_L063R8T/NUCLEO_L053R8/variant.h for Nucleo-64 NUCLEO_L053R8.

Whenever a new version is installed, remember to copy this file into the new version directory. For example, new version is x.yy.zz, these files must be copied into the corresponding directory:

  • ~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/variants/STM32F7xx/F765Z(G-I)T_F767Z(G-I)T_F777ZIT/NUCLEO_F767ZI/variant.h
  • ~/.arduino15/packages/STM32/hardware/stm32/x.yy.zz/variants/STM32L0xx/L052R(6-8)T_L053R(6-8)T_L063R8T/NUCLEO_L053R8/variant.h

Libraries' Patches

1. For application requiring 2K+ HTML page

If your application requires 2K+ HTML page, the current Ethernet library must be modified if you are using W5200/W5500 Ethernet shields. W5100 is not supported for 2K+ buffer. If you use boards requiring different CS/SS pin for W5x00 Ethernet shield, for example ESP32, ESP8266, nRF52, etc., you also have to modify the following libraries to be able to specify the CS/SS pin correctly.

2. For Ethernet library

To fix Ethernet library, just copy these following files into the Ethernet library directory to overwrite the old files:

You can also use the forked and modified library at Patched Ethernet

3. For EthernetLarge library

To fix EthernetLarge library, just copy these following files into the EthernetLarge library directory to overwrite the old files:

You can also use the forked and modified library at Patched EthernetLarge

4. For Ethernet2 library

To fix Ethernet2 library, just copy these following files into the Ethernet2 library directory to overwrite the old files:

To add UDP Multicast support, necessary for the UPnP_Generic library:

You can also use the forked and modified library at Patched Ethernet2

5. For Ethernet3 library

  1. To fix Ethernet3 library, just copy these following files into the Ethernet3 library directory to overwrite the old files:

You can also use the forked and modified library at Patched Ethernet3

6. For UIPEthernet library

To be able to compile and run on nRF52 boards with ENC28J60 using UIPEthernet library, you have to copy these following files into the UIPEthernet utility directory to overwrite the old files:

7. Optional UIPthernet patch

Check if you need to install the UIPthernet patch new STM32 core F3/F4 compatibility to avoid errors #include HardwareSPI.h on some STM32 boards (Nucleo-32 F303K8, etc.)

Configuration Notes

1. How to select which built-in Ethernet or shield to use

Select one and only one Ethernet library to use as follows:

  • Standard W5x00 Ethernet_Generic library

Standard W5x00 is using Ethernet_Generic library by default, in the sketch, just be sure to comment out or leave these #defines to be false :

#define USE_BUILTIN_ETHERNET    false
#define USE_UIP_ETHERNET        false

#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
  // Only one of the following to be true
  #define USE_ETHERNET_GENERIC  true
  #define USE_ETHERNET_ESP8266  false
  #define USE_ETHERNET_ENC      false
  #define USE_CUSTOM_ETHERNET   false
#endif

To use built-in LAN8742A

#define USE_BUILTIN_ETHERNET    true
#define USE_UIP_ETHERNET        false

#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
  // Only one of the following to be true
  #define USE_ETHERNET_GENERIC  false
  #define USE_ETHERNET_ESP8266  false
  #define USE_ETHERNET_ENC      false
  #define USE_CUSTOM_ETHERNET   false
#endif

To use LAN8720

#define USING_LAN8720           true
#define USE_BUILTIN_ETHERNET    true
#define USE_UIP_ETHERNET        false

#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
  // Only one of the following to be true
  #define USE_ETHERNET_GENERIC  false
  #define USE_ETHERNET_ESP8266  false
  #define USE_ETHERNET_ENC      false
  #define USE_CUSTOM_ETHERNET   false
#endif

To use W5x00 Ethernet, for example using Ethernet_Generic library

#define USE_BUILTIN_ETHERNET    false
#define USE_UIP_ETHERNET        false

#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
  // Only one of the following to be true
  #define USE_ETHERNET_GENERIC  true
  #define USE_ETHERNET_ESP8266  false
  #define USE_ETHERNET_ENC      false
  #define USE_CUSTOM_ETHERNET   false
#endif

To use ENC28J60 Ethernet, using EthernetENC library (NEW and Better)

#define USE_BUILTIN_ETHERNET    false
#define USE_UIP_ETHERNET        false

#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
  // Only one of the following to be true
  #define USE_ETHERNET_GENERIC  false
  #define USE_ETHERNET_ESP8266  false
  #define USE_ETHERNET_ENC      true
  #define USE_CUSTOM_ETHERNET   false
#endif

To use ENC28J60 Ethernet, using UIPEthernet library

#define USE_BUILTIN_ETHERNET    false
#define USE_UIP_ETHERNET        true

#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
  // Only one of the following to be true
  #define USE_ETHERNET_GENERIC  false
  #define USE_ETHERNET_ESP8266  false
  #define USE_ETHERNET_ENC      false
  #define USE_CUSTOM_ETHERNET   false
#endif
  • To use another Ethernet library For example, EthernetLarge library
#define USE_BUILTIN_ETHERNET    false
#define USE_UIP_ETHERNET        false

#if !(USE_BUILTIN_ETHERNET || USE_UIP_ETHERNET)
  // Only one of the following to be true
  #define USE_ETHERNET_GENERIC  false
  #define USE_ETHERNET_ESP8266  false
  #define USE_ETHERNET_ENC      false
  #define USE_CUSTOM_ETHERNET   true
#endif

....

#elif USE_CUSTOM_ETHERNET
  //#include "Ethernet_XYZ.h"
  #include "EthernetLarge.h"
  #warning Using Custom Ethernet library. You must include a library and initialize.
  #define SHIELD_TYPE           "Custom Ethernet & Ethernet_XYZ Library"
#else
  #define USE_ETHERNET_GENERIC   true
  #include "Ethernet_Generic.h"
  #warning Using default Ethernet_Generic lib
  #define SHIELD_TYPE           "W5x00 using default Ethernet_Generic Library"
#endif  
...

#include <EthernetWebServer.h>

2. How to select which SPI to use

To use standard SPI, check if

#define USING_CUSTOM_SPI        false
#define USING_SPI2              false

To use SPI2 or any custom SPI

// Be sure to use true only if necessary for your board, or compile error
#define USING_CUSTOM_SPI            true

#if ( USING_CUSTOM_SPI )
  // Currently test OK for F767ZI and L552ZE_Q
  #define USING_SPI2                  true

  #if (USING_SPI2)
    //#include <SPI.h>
    // For L552ZE-Q, F767ZI, but you can change the pins for any other boards
    // SCK: 23,  MOSI: 22, MISO: 25, SS/CS: 24 for SPI1
    #define CUR_PIN_MISO              25
    #define CUR_PIN_MOSI              22
    #define CUR_PIN_SCK               23
    #define CUR_PIN_SS                24

    #define SPI_NEW_INITIALIZED       true

    // Don't create the instance with CUR_PIN_SS, or Ethernet not working
    // To change for other boards' SPI libraries
    SPIClass SPI_New(CUR_PIN_MOSI, CUR_PIN_MISO, CUR_PIN_SCK);
    
    //#warning Using USE_THIS_SS_PIN = CUR_PIN_SS = 24

    #if defined(USE_THIS_SS_PIN)
      #undef USE_THIS_SS_PIN
    #endif   
    #define USE_THIS_SS_PIN       CUR_PIN_SS    //24
    
  #endif
  
#endif

Important:

  • The Ethernet_Shield_W5200, EtherCard, EtherSia libraries are not supported. Don't use unless you know how to modify those libraries.
  • Requests to support for any future custom Ethernet library will be ignored. Use at your own risk.

3. How to connect or select another CS/SS pin to use

The default CS/SS pin is 10 for all boards, and is configurable in code.

If the default pin is not correct, select another CS/SS pin (e.e. D22) to use as follows:

// To override the default CS/SS pin. Don't use unless you know exactly which pin to use
// You can define here or customize for each board at same place with BOARD_TYPE
#define USE_THIS_SS_PIN   22  //21  //5 //4 //2 //15
// Default pin 10 to SS/CS. To change according to your board, if necessary
//#define USE_THIS_SS_PIN       10

The current SPI pin usage can be displayed by turn on the debug option. For example:

Increase debug level to 2 in defines.h of any example:

#define DEBUG_ETHERNET_WEBSERVER_PORT       Serial

// Debug Level from 0 to 4
#define _ETHERNET_WEBSERVER_LOGLEVEL_       2

The Debug Terminal will then show that the current SPI pin usage of NUCLEO_F767ZI ==> SS/CS: D10, MOSI: D11, MISO: D12 and SCK: D13 when using W5x00

Start AdvancedWebServer on NUCLEO_F767ZI, using W5x00 using Ethernet_Generic Library
EthernetWebServer_STM32 v1.5.0
[EWS] Board : NUCLEO_F767ZI , setCsPin: 10
[EWS] Default SPI pinout:
[EWS] MOSI: 11
[EWS] MISO: 12
[EWS] SCK: 13
[EWS] SS: 10
[EWS] =========================
Connected! IP address: 192.168.2.89

Connect the wires according to the displayed information.

4. How to increase W5x00 TX/RX buffer

  • For Ethernet_Generic library only, simply use as follows to have large buffer similar to EthernetLarge library
#define ETHERNET_LARGE_BUFFERS
  • For Ethernet3 library only, use as follows
  // Use  MAX_SOCK_NUM = 4 for 4K, 2 for 8K, 1 for 16K RX/TX buffer
  #ifndef ETHERNET3_MAX_SOCK_NUM
    #define ETHERNET3_MAX_SOCK_NUM      4
  #endif
  
  Ethernet.setCsPin (USE_THIS_SS_PIN);
  Ethernet.init (ETHERNET3_MAX_SOCK_NUM);

5. How to adjust sendContent_P() and send_P() buffer size

sendContent_P() and send_P() buffer size is set default at 4 Kbytes, and minimum is 512 bytes. If you need to change, just add a definition, e.g.:

#define SENDCONTENT_P_BUFFER_SZ     2048

Note that the buffer size must be larger than 512 bytes. See Sending GZIP HTML ~ 120kb+ (suggested enhancement).

Usage

Class Constructor

  EthernetWebServer server(80);

Creates the EthernetWebServer class object.

Parameters:

host port number: int port (default is the standard HTTP port 80)

Basic Operations

Starting the server

  void begin();

Handling incoming client requests

  void handleClient();

Disabling the server

  void close();
  void stop();

Both methods function the same

Client request handlers

  void on();
  void addHandler();
  void onNotFound();
  void onFileUpload();

Example:

  server.on("/", handlerFunction);
  server.onNotFound(handlerFunction);   // called when handler is not assigned
  server.onFileUpload(handlerFunction); // handle file uploads

Sending responses to the client

  void send();
  void send_P();
  void sendContent_P();

Parameters:

code - HTTP response code, can be 200 or 404, etc.

content_type - HTTP content type, like "text/plain" or "image/png", etc.

content - actual content body

Advanced Options

Getting information about request arguments

  const String & arg();
  const String & argName();
  int args();
  bool hasArg();

Function usage:

arg - get request argument value, use arg("plain") to get POST body

argName - get request argument name

args - get arguments count

hasArg - check if argument exist

Getting information about request headers

  const String & header();
  const String & headerName();
  const String & hostHeader();
  int headers();
  bool hasHeader();

Function usage:

header - get request header value

headerName - get request header name

hostHeader - get request host header if available, else empty string

headers - get header count

hasHeader - check if header exist

Authentication

  bool authenticate();
  void requestAuthentication();

Function usage:

authenticate - server authentication, returns true if client is authenticated else false

requestAuthentication - sends authentication failure response to the client

Example Usage:


  if(!server.authenticate(username, password))
  {
    server.requestAuthentication();
  }

Other Function Calls

  const String & uri(); // get the current uri
  HTTPMethod  method(); // get the current method 
  WiFiClient client(); // get the current client
  HTTPUpload & upload(); // get the current upload
  void setContentLength(); // set content length
  void sendHeader(); // send HTTP header
  void sendContent(); // send content
  void sendContent_P();  // send content in PROGMEM
  void collectHeaders(); // set the request headers to collect
  void serveStatic();
  size_t streamFile();

HOWTO use STM32F4 with LAN8720

1. Wiring

This is the Wiring for STM32F4 (BLACK_F407VE, etc.) using LAN8720

LAN8720 PHY <---> STM32F4
TX1 <---> PB_13
TX_EN <---> PB_11
TX0 <---> PB_12
RX0 <---> PC_4
RX1 <---> PC_5
nINT/RETCLK <---> PA_1
CRS <---> PA_7
MDIO <---> PA_2
MDC <---> PC_1
GND <---> GND
VCC <---> +3.3V

Connect as follows. To program, use STM32CubeProgrammer or Arduino IDE with

  • U(S)ART Support: "Enabled (generic Serial)"
  • Upload Method : "STM32CubeProgrammer (SWD)"
STLink <---> STM32F4
SWCLK <---> SWCLK
SWDIO <---> SWDIO
RST <---> NRST
GND <---> GND
5v <---> 5V

3. HOWTO use Serial Port for Debugging

Connect FDTI (USB to Serial) as follows:

FDTI <---> STM32F4
RX <---> TX=PA_9
TX <---> RX=PA_10
GND <---> GND

Examples:

Original Examples

  1. AdvancedWebServer
  2. HelloServer
  3. HelloServer2
  4. HttpBasicAuth
  5. MQTTClient_Auth
  6. MQTTClient_Basic
  7. MQTT_ThingStream
  8. PostServer
  9. SimpleAuthentication
  10. UdpNTPClient
  11. UdpSendReceive
  12. WebClient
  13. WebClientRepeating
  14. WebServer
  15. multiFileProject New

HTTP and WebSocket Client New Examples

  1. BasicAuthGet
  2. CustomHeader
  3. DweetGet
  4. DweetPost
  5. HueBlink
  6. node_test_server
  7. PostWithHeaders
  8. SimpleDelete
  9. SimpleGet
  10. SimpleHTTPExample
  11. SimplePost
  12. SimplePut
  13. SimpleWebSocket

LAN8720 Examples

  1. AdvancedWebServer_LAN8720
  2. HelloServer_LAN8720
  3. HelloServer2_LAN8720
  4. HttpBasicAuth_LAN8720
  5. MQTTClient_Auth_LAN8720
  6. MQTTClient_Basic_LAN8720
  7. MQTT_ThingStream_LAN8720
  8. PostServer_LAN8720
  9. SimpleAuthentication_LAN8720
  10. UdpNTPClient_LAN8720
  11. UdpSendReceive_LAN8720
  12. WebClient_LAN8720
  13. WebClientRepeating_LAN8720
  14. WebServer_LAN8720

LAN8720 HTTP and WebSocket Client New Examples

  1. BasicAuthGet_LAN8720
  2. CustomHeader_LAN8720
  3. DweetGet_LAN8720
  4. DweetPost_LAN8720
  5. HueBlink_LAN8720
  6. node_test_server
  7. PostWithHeaders_LAN8720
  8. SimpleDelete_LAN8720
  9. SimpleGet_LAN8720
  10. SimpleHTTPExample_LAN8720
  11. SimplePost_LAN8720
  12. SimplePut_LAN8720
  13. SimpleWebSocket_LAN8720

Example AdvancedWebServer

1. File AdvancedWebServer.ino

https://github.com/khoih-prog/EthernetWebServer_STM32/blob/7b79d4dc38f194ba00d51de8cfb7389e68af4360/examples/AdvancedWebServer/AdvancedWebServer.ino#L40-L269

2. File defines.h

https://github.com/khoih-prog/EthernetWebServer_STM32/blob/7b79d4dc38f194ba00d51de8cfb7389e68af4360/examples/AdvancedWebServer/defines.h#L13-L224

Debug Terminal Output Samples

1. AdvancedWebServer on NUCLEO_F767ZI using Built-in LAN8742A Ethernet and STM32Ethernet Library

Following is debug terminal output and screen shot when running example AdvancedWebServer on STM32F7 Nucleo-144 NUCLEO_F767ZI using Built-in LAN8742A Ethernet and STM32Ethernet Library

Start AdvancedWebServer on NUCLEO_F767ZI, using LAN8742A Ethernet & STM32Ethernet Library
EthernetWebServer_STM32 v1.5.0
HTTP EthernetWebServer is @ IP : 192.168.2.117
EthernetWebServer::handleClient: New Client
method:  GET
url:  /
search:
headerName: Host
headerValue: 192.168.2.150
headerName: Connection
headerValue: keep-alive
headerName: Cache-Control
headerValue: max-age=0
headerName: DNT
headerValue: 1
headerName: Upgrade-Insecure-Requests
headerValue: 1
headerName: User-Agent
headerValue: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/84.0.4147.89 Safari/537.36
headerName: Accept
headerValue: text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.9
headerName: Accept-Encoding
headerValue: gzip, deflate
headerName: Accept-Language
headerValue: en-GB,en-US;q=0.9,en;q=0.8
args:
args count:  0
args:
args count:  0
Request: /
Arguments: 
Final list of key/value pairs:
EthernetWebServer::_handleRequest handle
EthernetWebServer::send1: len =  341
content =  <html><head><meta http-equiv='refresh' content='5'/><title>AdvancedWebServer NUCLEO_F767ZI</title><style>body { background-color: #cccccc; font-family: Arial, Helvetica, Sans-Serif; Color: #000088; }</style></head><body><h2>Hi from EthernetWebServer!</h2><h3>on NUCLEO_F767ZI</h3><p>Uptime: 0 d 00:00:31</p><img src="/test.svg" /></body></html>
EthernetWebServer::_prepareHeader sendHeader Conn close
EthernetWebServer::send1: write header =  HTTP/1.1 200 OK
Content-Type: text/html
Content-Length: 341
Connection: close

EthernetWebServer::sendContent: Client.write content:  <html><head><meta http-equiv='refresh' content='5'/><title>AdvancedWebServer NUCLEO_F767ZI</title><style>body { background-color: #cccccc; font-family: Arial, Helvetica, Sans-Serif; Color: #000088; }</style></head><body><h2>Hi from EthernetWebServer!</h2><h3>on NUCLEO_F767ZI</h3><p>Uptime: 0 d 00:00:31</p><img src="/test.svg" /></body></html>
EthernetWebServer::_handleRequest OK
EthernetWebServer::handleClient: Don't keepCurrentClient
EthernetWebServer::handleClient: Client disconnected
EthernetWebServer::handleClient: New Client
method:  GET
url:  /test.svg
search:
headerName: Host
headerValue: 192.168.2.150
headerName: Connection
headerValue: keep-alive
headerName: User-Agent
headerValue: Mozilla/5.0 (X11; Linux x86_64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/84.0.4147.89 Safari/537.36
headerName: DNT
headerValue: 1
headerName: Accept
headerValue: image/webp,image/apng,image/*,*/*;q=0.8
headerName: Referer
headerValue: http://192.168.2.150/
headerName: Accept-Encoding
headerValue: gzip, deflate
headerName: Accept-Language
headerValue: en-GB,en-US;q=0.9,en;q=0.8
args:
args count:  0
args:
args count:  0
Request: /test.svg
Arguments: 
Final list of key/value pairs:
EthernetWebServer::_handleRequest handle
EthernetWebServer::send1: len =  1949
content =  <svg xmlns="http://www.w3.org/2000/svg" version="1.1" width="310" height="150">
<rect width="310" height="150" fill="rgb(250, 230, 210)" stroke-width="1" stroke="rgb(0, 0, 0)" />
<g stroke="black">
<line x1="10" y1="90" x2="20" y2="22" stroke-width="1" />
<line x1="20" y1="22" x2="30" y2="98" stroke-width="1" />
<line x1="30" y1="98" x2="40" y2="64" stroke-width="1" />
<line x1="40" y1="64" x2="50" y2="104" stroke-width="1" />
<line x1="50" y1="104" x2="60" y2="31" stroke-width="1" />
<line x1="60" y1="31" x2="70" y2="59" stroke-width="1" />
<line x1="70" y1="59" x2="80" y2="139" stroke-width="1" />
<line x1="80" y1="139" x2="90" y2="117" stroke-width="1" />
<line x1="90" y1="117" x2="100" y2="75" stroke-width="1" />
<line x1="100" y1="75" x2="110" y2="72" stroke-width="1" />
<line x1="110" y1="72" x2="120" y2="137" stroke-width="1" />
<line x1="120" y1="137" x2="130" y2="20" stroke-width="1" />
<line x1="130" y1="20" x2="140" y2="94" stroke-width="1" />
<line x1="140" y1="94" x2="150" y2="81" stroke-width="1" />
<line x1="150" y1="81" x2="160" y2="38" stroke-width="1" />
<line x1="160" y1="38" x2="170" y2="33" stroke-width="1" />
<line x1="170" y1="33" x2="180" y2="53" stroke-width="1" />
<line x1="180" y1="53" x2="190" y2="88" stroke-width="1" />
<line x1="190" y1="88" x2="200" y2="32" stroke-width="1" />
<line x1="200" y1="32" x2="210" y2="110" stroke-width="1" />
<line x1="210" y1="110" x2="220" y2="87" stroke-width="1" />
<line x1="220" y1="87" x2="230" y2="11" stroke-width="1" />
<line x1="230" y1="11" x2="240" y2="98" stroke-width="1" />
<line x1="240" y1="98" x2="250" y2="76" stroke-width="1" />
<line x1="250" y1="76" x2="260" y2="121" stroke-width="1" />
<line x1="260" y1="121" x2="270" y2="139" stroke-width="1" />
<line x1="270" y1="139" x2="280" y2="103" stroke-width="1" />
<line x1="280" y1="103" x2="290" y2="60" stroke-width="1" />
<line x1="290" y1="60" x2="300" y2="36" stroke-width="1" />
</g>
</svg>

EthernetWebServer::_prepareHeader sendHeader Conn close
EthernetWebServer::send1: write header =  HTTP/1.1 200 OK
Content-Type: image/svg+xml
Content-Length: 1949
Connection: close

2. WebClientRepeating on NUCLEO_F767ZI using ENC28J60 and new EthernetENC Library

The following is debug terminal output when running example WebClientRepeating on STM32F7 Nucleo-144 NUCLEO_F767ZI using ENC28J60 and new EthernetENC Library

Start WebClientRepeating on NUCLEO_F767ZI, using ENC28J60 & EthernetENC Library
EthernetWebServer_STM32 v1.5.0
[EWS] Board : NUCLEO_F767ZI , setCsPin: 10
[EWS] Default SPI pinout:
[EWS] MOSI: 11
[EWS] MISO: 12
[EWS] SCK: 13
[EWS] SS: 10
[EWS] =========================
You're connected to the network, IP = 192.168.2.123

Connecting...
HTTP/1.1 200 OK
Date: Wed, 27 Apr 2022 17:12:43 GMT
Content-Type: text/plain
Content-Length: 2263
Connection: close
x-amz-id-2: Y0KDwqmE5CUvFMSLnxWUV4XoqEDCUL1h9GN+vWHRz7vpjDK77h8fqAbuEqBXVEZRm3Ybv7bCZtE=
x-amz-request-id: EFJSRB21CQFZQDRX
Last-Modified: Wed, 23 Feb 2022 14:56:42 GMT
ETag: "667cf48afcc12c38c8c1637947a04224"
CF-Cache-Status: DYNAMIC
Report-To: {"endpoints":[{"url":"https:\/\/a.nel.cloudflare.com\/report\/v3?s=T2F7koaxDm8y3draFWHzKSKtqF3brIseyVbvIpy%2FDp4RGAh7d6Lc%2F7rw%2B96w7hYckhvRgN1l9sMJJuNuQCxG8JZeCIelNLNXDBKH5BJajxjC7kMiQ3PwdUm8jFr%2B0aA%3D"}],"group":"cf-nel","max_age":604800}
NEL: {"success_fraction":0,"report_to":"cf-nel","max_age":604800}
Server: cloudflare
CF-RAY: 70292f44ceb3a253-YYZ
alt-svc: h3=":443"; ma=86400, h3-29=":443"; ma=86400


           `:;;;,`                      .:;;:.           
        .;;;;;;;;;;;`                :;;;;;;;;;;:     TM 
      `;;;;;;;;;;;;;;;`            :;;;;;;;;;;;;;;;      
     :;;;;;;;;;;;;;;;;;;         `;;;;;;;;;;;;;;;;;;     
    ;;;;;;;;;;;;;;;;;;;;;       .;;;;;;;;;;;;;;;;;;;;    
   ;;;;;;;;:`   `;;;;;;;;;     ,;;;;;;;;.`   .;;;;;;;;   
  .;;;;;;,         :;;;;;;;   .;;;;;;;          ;;;;;;;  
  ;;;;;;             ;;;;;;;  ;;;;;;,            ;;;;;;. 
 ,;;;;;               ;;;;;;.;;;;;;`              ;;;;;; 
 ;;;;;.                ;;;;;;;;;;;`      ```       ;;;;;`
 ;;;;;                  ;;;;;;;;;,       ;;;       .;;;;;
`;;;;:                  `;;;;;;;;        ;;;        ;;;;;
,;;;;`    `,,,,,,,,      ;;;;;;;      .,,;;;,,,     ;;;;;
:;;;;`    .;;;;;;;;       ;;;;;,      :;;;;;;;;     ;;;;;
:;;;;`    .;;;;;;;;      `;;;;;;      :;;;;;;;;     ;;;;;
.;;;;.                   ;;;;;;;.        ;;;        ;;;;;
 ;;;;;                  ;;;;;;;;;        ;;;        ;;;;;
 ;;;;;                 .;;;;;;;;;;       ;;;       ;;;;;,
 ;;;;;;               `;;;;;;;;;;;;                ;;;;; 
 `;;;;;,             .;;;;;; ;;;;;;;              ;;;;;; 
  ;;;;;;:           :;;;;;;.  ;;;;;;;            ;;;;;;  
   ;;;;;;;`       .;;;;;;;,    ;;;;;;;;        ;;;;;;;:  
    ;;;;;;;;;:,:;;;;;;;;;:      ;;;;;;;;;;:,;;;;;;;;;;   
    `;;;;;;;;;;;;;;;;;;;.        ;;;;;;;;;;;;;;;;;;;;    
      ;;;;;;;;;;;;;;;;;           :;;;;;;;;;;;;;;;;:     
       ,;;;;;;;;;;;;;,              ;;;;;;;;;;;;;;       
         .;;;;;;;;;`                  ,;;;;;;;;:         
                                                         
                                                         
                                                         
                                                         
    ;;;   ;;;;;`  ;;;;:  .;;  ;; ,;;;;;, ;;. `;,  ;;;;   
    ;;;   ;;:;;;  ;;;;;; .;;  ;; ,;;;;;: ;;; `;, ;;;:;;  
   ,;:;   ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;,`;, ;;  ;;  
   ;; ;:  ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;;`;, ;;  ;;. 
   ;: ;;  ;;;;;:  ;;  ;; .;;  ;;   ,;,   ;;`;;;, ;;  ;;` 
  ,;;;;;  ;;`;;   ;;  ;; .;;  ;;   ,;,   ;; ;;;, ;;  ;;  
  ;;  ,;, ;; .;;  ;;;;;:  ;;;;;: ,;;;;;: ;;  ;;, ;;;;;;  
  ;;   ;; ;;  ;;` ;;;;.   `;;;:  ,;;;;;, ;;  ;;,  ;;;; 

Disconnecting from server...

3. UdpNTPClient on NUCLEO_F767ZI using W5500 and Ethernet_Generic Library

The following is debug terminal output when running example UdpNTPClient on STM32F7 Nucleo-144 NUCLEO_F767ZI using W5500 and Ethernet_Generic Library

Start UdpNTPClient on NUCLEO_F767ZI, using W5x00 & Ethernet_Generic Library
Ethernet_Generic v2.7.1
EthernetWebServer_STM32 v1.5.0
[EWS] Board : NUCLEO_F767ZI , setCsPin: 10
[EWS] Default SPI pinout:
[EWS] MOSI: 11
[EWS] MISO: 12
[EWS] SCK: 13
[EWS] SS: 10
[EWS] =========================
You're connected to the network, IP = 192.168.2.123
UDP Packet received, size 48
From 132.163.97.1, port 123
Seconds since Jan 1 1900 = 3809283621
Unix time = 1600294821
The UTC time is 22:20:21

4. SimpleWebSocket on NUCLEO_F767ZI using Built-in LAN8742A Ethernet and STM32Ethernet Library

The terminal output of STM32F7 Nucleo-144 NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library running SimpleWebSocket example to demonstrate newly-added WebSocket Client feature.

Starting SimpleWebSocket on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
EthernetWebServer_STM32 v1.5.0
Using mac index = 10
Connected! IP address: 192.168.2.139
starting WebSocket client
Sending Hello 0
Sending Hello 1
Received a message:
0 => Hello from SimpleWebSocket on NUCLEO_F767ZI, millis = 7297
Sending Hello 2
Received a message:
1 => Hello from SimpleWebSocket on NUCLEO_F767ZI, millis = 12297
Sending Hello 3
Received a message:
2 => Hello from SimpleWebSocket on NUCLEO_F767ZI, millis = 17300
Sending Hello 4
Received a message:
3 => Hello from SimpleWebSocket on NUCLEO_F767ZI, millis = 22303
Sending Hello 5
Received a message:
4 => Hello from SimpleWebSocket on NUCLEO_F767ZI, millis = 27306

5. SimpleWebSocket on NUCLEO_F767ZI using W5x00 and Ethernet_Generic Library

The terminal output of STM32F7 Nucleo-144 NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library running SimpleWebSocket example to demonstrate newly-added WebSocket Client feature.

Starting SimpleWebSocket on NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library
Ethernet_Generic v2.7.1
EthernetWebServer_STM32 v1.5.0
[EWS] =========== USE_Ethernet_Generic ===========
[EWS] Default SPI pinout:
[EWS] MOSI: 11
[EWS] MISO: 12
[EWS] SCK: 13
[EWS] SS: 10
[EWS] =========================
Connected! IP address: 192.168.2.139
starting WebSocket client
Sending Hello 0
Sending Hello 1
Received a message:
0 => Hello from SimpleWebSocket on NUCLEO_F767ZI, millis = 2390
Sending Hello 2
Received a message:
1 => Hello from SimpleWebSocket on NUCLEO_F767ZI, millis = 7391
Sending Hello 3
Received a message:
2 => Hello from SimpleWebSocket on NUCLEO_F767ZI, millis = 12399
Sending Hello 4
Received a message:
3 => Hello from SimpleWebSocket on NUCLEO_F767ZI, millis = 17407
Sending Hello 5
Received a message:
4 => Hello from SimpleWebSocket on NUCLEO_F767ZI, millis = 22416
Sending Hello 6
Received a message:
5 => Hello from SimpleWebSocket on NUCLEO_F767ZI, millis = 27425

6. SimpleHTTPExample on NUCLEO_F767ZI using Built-in LAN8742A Ethernet and STM32Ethernet Library

The terminal output of STM32F7 Nucleo-144 NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library running SimpleHTTPExample example to demonstrate newly-added HTTP Client feature.

Starting SimpleHTTPExample on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
EthernetWebServer_STM32 v1.5.0
Connected! IP address: 192.168.2.139
startedRequest ok
Got status code: 200
Content length is: 2263

Body returned follows:

           `:;;;,`                      .:;;:.           
        .;;;;;;;;;;;`                :;;;;;;;;;;:     TM 
      `;;;;;;;;;;;;;;;`            :;;;;;;;;;;;;;;;      
     :;;;;;;;;;;;;;;;;;;         `;;;;;;;;;;;;;;;;;;     
    ;;;;;;;;;;;;;;;;;;;;;       .;;;;;;;;;;;;;;;;;;;;    
   ;;;;;;;;:`   `;;;;;;;;;     ,;;;;;;;;.`   .;;;;;;;;   
  .;;;;;;,         :;;;;;;;   .;;;;;;;          ;;;;;;;  
  ;;;;;;             ;;;;;;;  ;;;;;;,            ;;;;;;. 
 ,;;;;;               ;;;;;;.;;;;;;`              ;;;;;; 
 ;;;;;.                ;;;;;;;;;;;`      ```       ;;;;;`
 ;;;;;                  ;;;;;;;;;,       ;;;       .;;;;;
`;;;;:                  `;;;;;;;;        ;;;        ;;;;;
,;;;;`    `,,,,,,,,      ;;;;;;;      .,,;;;,,,     ;;;;;
:;;;;`    .;;;;;;;;       ;;;;;,      :;;;;;;;;     ;;;;;
:;;;;`    .;;;;;;;;      `;;;;;;      :;;;;;;;;     ;;;;;
.;;;;.                   ;;;;;;;.        ;;;        ;;;;;
 ;;;;;                  ;;;;;;;;;        ;;;        ;;;;;
 ;;;;;                 .;;;;;;;;;;       ;;;       ;;;;;,
 ;;;;;;               `;;;;;;;;;;;;                ;;;;; 
 `;;;;;,             .;;;;;; ;;;;;;;              ;;;;;; 
  ;;;;;;:           :;;;;;;.  ;;;;;;;            ;;;;;;  
   ;;;;;;;`       .;;;;;;;,    ;;;;;;;;        ;;;;;;;:  
    ;;;;;;;;;:,:;;;;;;;;;:      ;;;;;;;;;;:,;;;;;;;;;;   
    `;;;;;;;;;;;;;;;;;;;.        ;;;;;;;;;;;;;;;;;;;;    
      ;;;;;;;;;;;;;;;;;           :;;;;;;;;;;;;;;;;:     
       ,;;;;;;;;;;;;;,              ;;;;;;;;;;;;;;       
         .;;;;;;;;;`                  ,;;;;;;;;:         
                                                         
                                                         
                                                         
                                                         
    ;;;   ;;;;;`  ;;;;:  .;;  ;; ,;;;;;, ;;. `;,  ;;;;   
    ;;;   ;;:;;;  ;;;;;; .;;  ;; ,;;;;;: ;;; `;, ;;;:;;  
   ,;:;   ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;,`;, ;;  ;;  
   ;; ;:  ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;;`;, ;;  ;;. 
   ;: ;;  ;;;;;:  ;;  ;; .;;  ;;   ,;,   ;;`;;;, ;;  ;;` 
  ,;;;;;  ;;`;;   ;;  ;; .;;  ;;   ,;,   ;; ;;;, ;;  ;;  
  ;;  ,;, ;; .;;  ;;;;;:  ;;;;;: ,;;;;;: ;;  ;;, ;;;;;;  
  ;;   ;; ;;  ;;` ;;;;.   `;;;:  ,;;;;;, ;;  ;;,  ;;;;

7. MQTTClient_Auth on NUCLEO_F767ZI using Built-in LAN8742A Ethernet and STM32Ethernet Library

The terminal output of STM32F7 Nucleo-144 NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library running MQTTClient_Auth example to demonstrate newly-added HTTP Client feature.

Start MQTTClient_Auth on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
EthernetWebServer_STM32 v1.5.0
Connected! IP address: 192.168.2.152
Attempting MQTT connection to broker.emqx.io...connected
Message Send : MQTT_Pub => Hello from MQTTClient_Auth on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
Message arrived [MQTT_Pub] Hello from MQTTClient_Auth on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
Message Send : MQTT_Pub => Hello from MQTTClient_Auth on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
Message arrived [MQTT_Pub] Hello from MQTTClient_Auth on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
Message Send : MQTT_Pub => Hello from MQTTClient_Auth on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
Message arrived [MQTT_Pub] Hello from MQTTClient_Auth on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
Message Send : MQTT_Pub => Hello from MQTTClient_Auth on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
Message arrived [MQTT_Pub] Hello from MQTTClient_Auth on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
Message Send : MQTT_Pub => Hello from MQTTClient_Auth on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library
Message arrived [MQTT_Pub] Hello from MQTTClient_Auth on NUCLEO_F767ZI with LAN8742A Ethernet & STM32Ethernet Library

8. MQTTClient_Auth on NUCLEO_F767ZI using ENC28J60 and EthernetENC Library

The terminal output of STM32F7 Nucleo-144 NUCLEO_F767ZI with ENC28J60 & EthernetENC Library running MQTTClient_Auth example to demonstrate newly-added HTTP Client feature.

Start MQTTClient_Auth on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library
EthernetWebServer_STM32 v1.5.0
[EWS] =========== USE_ETHERNET_ENC ===========
[EWS] Default SPI pinout:
[EWS] MOSI: 11
[EWS] MISO: 12
[EWS] SCK: 13
[EWS] SS: 10
[EWS] =========================
[EWS] Board : NUCLEO_F767ZI , setCsPin: 10
C=========================
Currently Used SPI pinout:
MOSI:11
MISO:12
SCK:13
SS:10
=========================
Using mac index = 13
Connected! IP address: 192.168.2.152
Attempting MQTT connection to broker.emqx.io...connected
Message Send : MQTT_Pub => Hello from MQTTClient_Auth on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library
Message arrived [MQTT_Pub] Hello from MQTTClient_Auth on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library
Message Send : MQTT_Pub => Hello from MQTTClient_Auth on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library
Message arrived [MQTT_Pub] Hello from MQTTClient_Auth on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library
Message Send : MQTT_Pub => Hello from MQTTClient_Auth on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library
Message arrived [MQTT_Pub] Hello from MQTTClient_Auth on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library
Message Send : MQTT_Pub => Hello from MQTTClient_Auth on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library
Message arrived [MQTT_Pub] Hello from MQTTClient_Auth on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library
Message Send : MQTT_Pub => Hello from MQTTClient_Auth on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library
Message arrived [MQTT_Pub] Hello from MQTTClient_Auth on NUCLEO_F767ZI with ENC28J60 & EthernetENC Library

9. MQTTClient_Auth on NUCLEO_F767ZI using W5x00 and Ethernet_Generic Library

The terminal output of STM32F7 Nucleo-144 NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library running MQTTClient_Auth example to demonstrate newly-added HTTP Client feature.

Start MQTTClient_Auth on NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library
Ethernet_Generic v2.7.1
EthernetWebServer_STM32 v1.5.0
[EWS] =========== USE_Ethernet_Generic ===========
[EWS] Default SPI pinout:
[EWS] MOSI: 11
[EWS] MISO: 12
[EWS] SCK: 13
[EWS] SS: 10
[EWS] =========================
Connected! IP address: 192.168.2.78
Attempting MQTT connection to broker.emqx.io...connected
Message Send : MQTT_Pub => Hello from MQTTClient_Auth on NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library
Message arrived [MQTT_Pub] Hello from MQTTClient_Auth on NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library
Message Send : MQTT_Pub => Hello from MQTTClient_Auth on NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library
Message arrived [MQTT_Pub] Hello from MQTTClient_Auth on NUCLEO_F767ZI with W5x00 & Ethernet_Generic Library

10. SimpleWebSocket_LAN8720 on BLACK_F407VE using LAN8720 Ethernet and STM32Ethernet Library

The terminal output of STM32F4 BLACK_F407VE with LAN8720 Ethernet and STM32Ethernet Library running SimpleWebSocket_LAN8720 example to demonstrate newly-added HTTP Client feature.

Starting SimpleWebSocket_LAN8720 on BLACK_F407VE with LAN8720 Ethernet & STM32Ethernet Library
EthernetWebServer_STM32 v1.5.0
Using mac index = 6
Connected! IP address: 192.168.2.138
starting WebSocket client
disconnected
starting WebSocket client
Sending Hello 0
Sending Hello 1
Received a message:
0 => Hello from SimpleWebSocket on BLACK_F407VE using LAN8720, millis = 16685
Sending Hello 2
Received a message:
1 => Hello from SimpleWebSocket on BLACK_F407VE using LAN8720, millis = 21685
Sending Hello 3
Received a message:
2 => Hello from SimpleWebSocket on BLACK_F407VE using LAN8720, millis = 26690

11. WebClient_LAN8720 on BLACK_F407VE using LAN8720 Ethernet and STM32Ethernet Library

The terminal output of BLACK_F407VE using LAN8720 Ethernet and STM32Ethernet Library running WebClient_LAN8720 example to demonstrate newly-added HTTP Client feature.

Start WebClient_LAN8720 on BLACK_F407VE, using LAN8720 Ethernet & STM32Ethernet Library
EthernetWebServer_STM32 v1.5.0
You're connected to the network, IP = 192.168.2.139
Connecting...
HTTP/1.1 200 OK
Date: Wed, 27 Apr 2022 17:12:43 GMT
Content-Type: text/plain
Content-Length: 2263
Connection: close
x-amz-id-2: Y0KDwqmE5CUvFMSLnxWUV4XoqEDCUL1h9GN+vWHRz7vpjDK77h8fqAbuEqBXVEZRm3Ybv7bCZtE=
x-amz-request-id: EFJSRB21CQFZQDRX
Last-Modified: Wed, 23 Feb 2022 14:56:42 GMT
ETag: "667cf48afcc12c38c8c1637947a04224"
CF-Cache-Status: DYNAMIC
Report-To: {"endpoints":[{"url":"https:\/\/a.nel.cloudflare.com\/report\/v3?s=T2F7koaxDm8y3draFWHzKSKtqF3brIseyVbvIpy%2FDp4RGAh7d6Lc%2F7rw%2B96w7hYckhvRgN1l9sMJJuNuQCxG8JZeCIelNLNXDBKH5BJajxjC7kMiQ3PwdUm8jFr%2B0aA%3D"}],"group":"cf-nel","max_age":604800}
NEL: {"success_fraction":0,"report_to":"cf-nel","max_age":604800}
Server: cloudflare
CF-RAY: 70292f44ceb3a253-YYZ
alt-svc: h3=":443"; ma=86400, h3-29=":443"; ma=86400


           `:;;;,`                      .:;;:.           
        .;;;;;;;;;;;`                :;;;;;;;;;;:     TM 
      `;;;;;;;;;;;;;;;`            :;;;;;;;;;;;;;;;      
     :;;;;;;;;;;;;;;;;;;         `;;;;;;;;;;;;;;;;;;     
    ;;;;;;;;;;;;;;;;;;;;;       .;;;;;;;;;;;;;;;;;;;;    
   ;;;;;;;;:`   `;;;;;;;;;     ,;;;;;;;;.`   .;;;;;;;;   
  .;;;;;;,         :;;;;;;;   .;;;;;;;          ;;;;;;;  
  ;;;;;;             ;;;;;;;  ;;;;;;,            ;;;;;;. 
 ,;;;;;               ;;;;;;.;;;;;;`              ;;;;;; 
 ;;;;;.                ;;;;;;;;;;;`      ```       ;;;;;`
 ;;;;;                  ;;;;;;;;;,       ;;;       .;;;;;
`;;;;:                  `;;;;;;;;        ;;;        ;;;;;
,;;;;`    `,,,,,,,,      ;;;;;;;      .,,;;;,,,     ;;;;;
:;;;;`    .;;;;;;;;       ;;;;;,      :;;;;;;;;     ;;;;;
:;;;;`    .;;;;;;;;      `;;;;;;      :;;;;;;;;     ;;;;;
.;;;;.                   ;;;;;;;.        ;;;        ;;;;;
 ;;;;;                  ;;;;;;;;;        ;;;        ;;;;;
 ;;;;;                 .;;;;;;;;;;       ;;;       ;;;;;,
 ;;;;;;               `;;;;;;;;;;;;                ;;;;; 
 `;;;;;,             .;;;;;; ;;;;;;;              ;;;;;; 
  ;;;;;;:           :;;;;;;.  ;;;;;;;            ;;;;;;  
   ;;;;;;;`       .;;;;;;;,    ;;;;;;;;        ;;;;;;;:  
    ;;;;;;;;;:,:;;;;;;;;;:      ;;;;;;;;;;:,;;;;;;;;;;   
    `;;;;;;;;;;;;;;;;;;;.        ;;;;;;;;;;;;;;;;;;;;    
      ;;;;;;;;;;;;;;;;;           :;;;;;;;;;;;;;;;;:     
       ,;;;;;;;;;;;;;,              ;;;;;;;;;;;;;;       
         .;;;;;;;;;`                  ,;;;;;;;;:         
                                                         
                                                         
                                                         
                                                         
    ;;;   ;;;;;`  ;;;;:  .;;  ;; ,;;;;;, ;;. `;,  ;;;;   
    ;;;   ;;:;;;  ;;;;;; .;;  ;; ,;;;;;: ;;; `;, ;;;:;;  
   ,;:;   ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;,`;, ;;  ;;  
   ;; ;:  ;;  ;;  ;;  ;; .;;  ;;   ,;,   ;;;;`;, ;;  ;;. 
   ;: ;;  ;;;;;:  ;;  ;; .;;  ;;   ,;,   ;;`;;;, ;;  ;;` 
  ,;;;;;  ;;`;;   ;;  ;; .;;  ;;   ,;,   ;; ;;;, ;;  ;;  
  ;;  ,;, ;; .;;  ;;;;;:  ;;;;;: ,;;;;;: ;;  ;;, ;;;;;;  
  ;;   ;; ;;  ;;` ;;;;.   `;;;:  ,;;;;;, ;;  ;;,  ;;;; 

Disconnecting from server...

12. AdvancedWebServer_LAN8720 on BLACK_F407VE, using LAN8720 Ethernet and STM32Ethernet Library

Following is debug terminal output and screen shot when running example AdvancedWebServer_LAN8720 on BLACK_F407VE, using LAN8720 Ethernet and STM32Ethernet Library

Start AdvancedWebServer_LAN8720 on BLACK_F407VE, using LAN8720 Ethernet & STM32Ethernet Library
EthernetWebServer_STM32 v1.5.0
.[EWS] String Len = 0, extend to 2048
......... .......... .......... .......... .......... .......... .......... ..........

13. AdvancedWebServer on NUCLEO_L552ZE_Q with W5x00 using Ethernet_Generic Library and custom SPI

Following is debug terminal output and screen shot when running example AdvancedWebServer on NUCLEO_L552ZE_Q, using W5500 Ethernet with Ethernet_Generic Library and custom SPI

Start AdvancedWebServer on NUCLEO_L552ZE_Q, with W5x00 using Ethernet_Generic Library and custom SPI
Ethernet_Generic v2.7.1
EthernetWebServer_STM32 v1.5.0
[EWS] Default SPI pinout:
[EWS] MOSI: 22
[EWS] MISO: 25
[EWS] SCK: 23
[EWS] SS: 24
[EWS] =========================
Connected! IP address: 192.168.2.116
HTTP EthernetWebServer is @ IP : 192.168.2.116
.[EWS] String Len = 0, extend to 2048
........ ....

Debug

Debug is enabled by default on Serial. Debug Level from 0 to 4. To disable, change the ETHERNET_WEBSERVER_LOGLEVEL to 0

// Use this to output debug msgs to Serial
#define DEBUG_ETHERNET_WEBSERVER_PORT       Serial
// Use this to disable all output debug msgs
// Debug Level from 0 to 4
#define _ETHERNET_WEBSERVER_LOGLEVEL_       0

Troubleshooting

If you get compilation errors, more often than not, you may need to install a newer version of the board's core, applying Libraries' Patches, Packages' Patches or this library latest version.

Not supported boards

These boards are not supported:

  • Some Nucleo-32 (small Flash/memory)
  • Eval (no Serial, just need to redefine in sketch, library and UIPEthernet)
  • Generic STM32F0 (small Flash/memory)
  • Generic STM32F1 (with 64-K Flash): C6
  • Generic STM32F3 : no HardwareSPI.h
  • Electronics Speed Controllers (small Flash/memory)

Issues

Submit issues to: EthernetWebServer_STM32 issues

TO DO

  1. Bug Searching and Killing
  2. Support more non-compatible Ethernet Libraries such as Ethernet_Shield_W5200, EtherCard, EtherSia
  3. Add mDNS features.

DONE

  1. Add support to STM32F1,2,3,4,7 boards with 64K+ Flash.
  2. Add support to built-in Ethernet LAN8742A using STM32Ethernet library, for boards such as Nucleo-144 NUCLEO_F767ZI.
  3. Add support to Ethernet W5x00, using either Ethernet, Ethernet2, Ethernet3 or EthernetLarge library
  4. Add support to Ethernet ENC28J60, using EthernetENC or UIPEthernet library
  5. Add support to all STM32 boards (STM32F/L/H/G/WB/MP1) with 32K+ Flash.
  6. Add High-level HTTP (GET, POST, PUT, PATCH, DELETE) and WebSocket Client
  7. Add SSL/TLS Server support in EthernetWebServer_SSL_STM32
  8. Add support to Ethernet LAN8720 using STM32Ethernet library, for boards such as Nucleo-144 (F429ZI, NUCLEO_F746NG, NUCLEO_F746ZG, NUCLEO_F756ZG), Discovery (DISCO_F746NG) and STM32F4 boards (BLACK_F407VE, BLACK_F407VG, BLACK_F407ZE, BLACK_F407ZG, BLACK_F407VE_Mini, DIYMORE_F407VGT, FK407M1)
  9. Reduce usage of Arduino String with std::string
  10. Optimize library code and examples by using reference-passing instead of value-passing
  11. Fix authenticate issue and compiler warnings caused by libb64
  12. Use new Ethernet_Generic library as default for W5x00.
  13. Rewrite library and add example multiFileProject to demo for multiple-file project to fix multiple-definitions linker error
  14. Change from arduino.cc to arduino.tips in examples
  15. Add support to any custom hardware / software SPI for W5x00 using Ethernet_Generic Library
  16. Add support to STM32L5 boards, such as Nucleo-L552ZE-Q

Contributions and Thanks

  1. Based on and modified from Ivan Grokhotkov's ESP8266WebServer
  2. Juraj Andrássy for EthernetENC and UIPEthernet library
  3. Thanks to Miguel Alexandre Wisintainer to help debug and test.
  4. Thanks to Aron N. to initiate Sending GZIP HTML ~ 120kb+ (suggested enhancement), to help code and test the solution, to add support to PROGMEM-related commands, such as sendContent_P() and send_P(), leading to v1.0.6.
  5. Adrian McEwen for HttpClient Library on which the ArduinoHttpClient Library and this EthernetWebServer library are relied.
igrr
⭐️ Ivan Grokhotkov
 amcewen
⭐️ Adrian McEwen
 jandrassy
⭐️ Juraj Andrássy
 tcpipchip
⭐️ Miguel Wisintainer
 porkyneal
⭐️ Aron N.

Contributing

If you want to contribute to this project:

  • Report bugs and errors
  • Ask for enhancements
  • Create issues and pull requests
  • Tell other people about this library

License

  • The library is licensed under MIT

Copyright (c) 2020- Khoi Hoang

Open Source Agenda is not affiliated with "EthernetWebServer STM32" Project. README Source: khoih-prog/EthernetWebServer_STM32
Stars
81
Open Issues
0
Last Commit
1 year ago
License
MIT
Tags
Enc28j60 Ethernet Ethernet Shield Ethernetwebserver HTTP Client Http Server Lan8720 Lan8742a Nucleo 144 Stm32 Stm32f103 Stm32f4 Stm32f7 Tcp Client Tcp Server Tcp Socket Udp Client Udp Server W5x00 Webserver Ethernet Generic Wiznet Custom Spi

Open Source Agenda Badge

Open Source Agenda Rating
Submit Review Review Your Favorite Project
Submit Resource Articles, Courses, Videos
Submit Article Submit a post to our blog

From the blog

Dec 11, 2022

How to Choose Which Programming Language to Learn First?

From the blog

Dec 11, 2022

How to Choose Which Programming Language to Learn First?