Esphome Versions Save

Full list of changes

New Components

• feat: add AS5600 component/sensor esphome#5174 by @ammmze (new-integration)
• Support for ST7567 display 128x64 (I2C, SPI) esphome#5952 by @latonita (new-integration)
• BME280 SPI esphome#5538 by @apbodrov (new-integration) (breaking-change)
• Add support for VEML3235 lux sensor esphome#5959 by @kbx81 (new-integration)
• Add support of Honeywell HumidIcon (I2C HIH series) Temperature & Humidity sensor esphome#5730 by @Benichou34 (new-integration)
• Add combination sensor and remove absorbed kalman_combinator component esphome#5438 by @kahrendt (new-integration) (breaking-change)
• Add micro_wake_word component esphome#6136 by @kahrendt (new-integration)

Breaking Changes

• PMSx003 add relevant device and state classes to default config esphome#5633 by @wheimbigner (breaking-change)
• BME280 SPI esphome#5538 by @apbodrov (new-integration) (breaking-change)
• convert cse7766 to non-polling esphome#6095 by @ssieb (breaking-change)
• Add combination sensor and remove absorbed kalman_combinator component esphome#5438 by @kahrendt (new-integration) (breaking-change)

Beta Changes

• AUTO_LOAD sensor for shelly_dimmer esphome#6223 by @kbx81
• Add more debugging logs to microWakeWord esphome#6238 by @kahrendt
• Fix to RF receiver for Drayton Digistat heating controller esphome#6235 by @marshn
• WRGB Use correct multiplier esphome#6237 by @mhetzi
• Add optional minimum esphome version to microWakeWord manifest esphome#6240 by @jesserockz
• Fix xl9535 pin reads esphome#6242 by @jesserockz
• hold interrupt disable for dallas one-wire esphome#6244 by @ssieb
• Fix tm1651 enum esphome#6248 by @kbx81
• Clear UART read buffer before sending next command esphome#6200 by @fototakas
• Voice Assistant: add on_idle trigger and fix nevermind esphome#6141 by @synesthesiam
• Tuya Fan component fix to handle enum datapoint type esphome#6135 by @sibowler

All changes

• Bump esptool from 4.6.2 to 4.7.0 esphome#5935 by @dependabot[bot]
• Bump actions/download-artifact from 3.0.2 to 4.0.0 esphome#5936 by @dependabot[bot]
• Bump build-image action versions esphome#5954 by @jesserockz
• Revert "Bump build-image action versions" esphome#5955 by @jesserockz
• Revert "Bump actions/download-artifact from 3.0.2 to 4.0.0" esphome#5956 by @jesserockz
• Bump zeroconf from 0.130.0 to 0.131.0 esphome#5967 by @dependabot[bot]
• Add ability to lock to set mode esphome#5924 by @ysmilda
• feat: add AS5600 component/sensor esphome#5174 by @ammmze (new-integration)
• Add default substitutions for package includes esphome#5752 by @mknjc
• Add gradient option to addressable color wipe effect esphome#5689 by @lifeisafractal
• Added alarm processing for Haier component (hOn protocol) esphome#5965 by @paveldn
• Allow haier remote protocol to use lambdas esphome#5898 by @catlee
• PMSx003 add relevant device and state classes to default config esphome#5633 by @wheimbigner (breaking-change)
• Add waveshare 2.7in V2 model esphome#5903 by @gumulka
• Add support for waveshare 2.9in B V3 version esphome#5902 by @gumulka
• Fix pin reuse in test1 esphome#5978 by @jesserockz
• Add Waveshare 1.47in 172x320 to ST7789v component esphome#5884 by @mrtoy-me
• (fingerprint_grow) Added on_finger_scan_invalid automation. esphome#5885 by @RubenNL
• Alarm panel: Add changes to support enhanced features esphome#5671 by @hwstar
• support default pins for adafruit esp32 feather v2 esphome#5482 by @sbrudenell
• Bug: Unwanted change resistance in x9c component esphome#5483 by @fizista
• Improvements to RF receiver for Drayton Digistat heating controller esphome#5504 by @marshn
• Reduce memory usage with StringRef in MQTT Components esphome#5719 by @kahrendt
• Nextion allow underscore on names esphome#5979 by @edwardtfn
• Add Keeloq RF protocol esphome#5511 by @marshn
• Add a Binary Sensor Filter for state settling esphome#5900 by @cottsay
• Lint the script folder files esphome#5991 by @jesserockz
• web_server support for home assistant like styling esphome#5854 by @afarago
• [Touchscreen] Add expire of touch record. esphome#5986 by @Fabian-Schmidt
• Support for ST7567 display 128x64 (I2C, SPI) esphome#5952 by @latonita (new-integration)
• Add constants used by multiple display drivers to global const.py esphome#6033 by @clydebarrow
• Nextion queue size esphome#6029 by @edwardtfn
• Ble client additions and fixes esphome#5277 by @clydebarrow
• HaierProtocol library updated to 0.9.25 to fix the answer_timeout bug esphome#6015 by @paveldn
• GT911 touchscreen: Fix bug causing touch button release to fail esphome#6042 by @clydebarrow
• Display: Introduce draw_pixels_at() method for fast block display rendering esphome#6034 by @clydebarrow
• clang-format and clang-tidy scripts: More robust algorithm to find correct executable esphome#6041 by @clydebarrow
• Don't crash with invalid adc pin esphome#6059 by @ssieb
• Add questionmark to default glyphs. esphome#6053 by @RubenNL
• pylontech: fix voltage_low and voltage_high wrong unit esphome#6060 by @functionpointer
• Bump flake8 from 6.1.0 to 7.0.0 esphome#6058 by @dependabot[bot]
• Nextion enable upload from https when using esp-idf esphome#6051 by @edwardtfn
• Extends UART change at runtime to ESP8266 esphome#6019 by @edwardtfn
• Nextion draw QR code at runtime esphome#6027 by @edwardtfn
• Extend i2s config options esphome#6056 by @Hadatko
• Add getter for image data_start esphome#6036 by @clydebarrow
• Bump hypothesis to 6.92.1 esphome#6011 by @bdraco
• Bump recommended ESP32 IDF to 4.4.6 esphome#6048 by @bdraco
• Bump pytest from 7.4.3 to 7.4.4 esphome#6046 by @dependabot[bot]
• dashboard: refactor ping implementation to be more efficient esphome#6002 by @bdraco
• Bump pytest-asyncio from 0.23.2 to 0.23.3 esphome#6047 by @dependabot[bot]
• Bump black from 23.12.0 to 23.12.1 esphome#6018 by @dependabot[bot]
• Run python tests on windows and macos esphome#6010 by @bdraco
• BME280 SPI esphome#5538 by @apbodrov (new-integration) (breaking-change)
• Actions to enable and disable WireGuard connection esphome#5690 by @droscy
• hydreon_rgxx - fix missing cg.add(var.set_model(...)) esphome#6065 by @mrtoy-me
• Bump pillow to 10.2.0. esphome#6091 by @pfrenssen
• convert cse7766 to non-polling esphome#6095 by @ssieb (breaking-change)
• Use touch state from ft63x6 driver. esphome#6055 by @nielsnl68
• update script/setup so it works fine on windows esphome#6087 by @nielsnl68
• add Pico-ResTouch-LCD-3.5 esphome#6078 by @nielsnl68
• Revert "add Pico-ResTouch-LCD-3.5" esphome#6098 by @nielsnl68
• Add triangle shapes to display component esphome#6096 by @mathieu-mp
• Fingerprint_grow: Trigger on finger scan start and on finger scan misplaced esphome#6003 by @alexborro
• Add continuous option to the graph esphome#6093 by @ssieb
• Add NFC binary sensor platform esphome#6068 by @kbx81
• Socket: Add recvfrom method to receive UDP with source address. esphome#6103 by @clydebarrow
• Add support for VEML3235 lux sensor esphome#5959 by @kbx81 (new-integration)
• CV: tidy up Schema wrapper esphome#6105 by @jesserockz
• Add support X.509 client certificates for MQTT. esphome#5778 by @h2zero
• Fix color observation for triangle outline in display component esphome#6107 by @mathieu-mp
• Add support of Honeywell HumidIcon (I2C HIH series) Temperature & Humidity sensor esphome#5730 by @Benichou34 (new-integration)
• Proposal: Test yaml for each component esphome#5398 by @Fabian-Schmidt
• WiFi fast_connect: save/load BSSID and channel for faster connect from sleep esphome#5931 by @rguca
• Fixes Waveshare 7.5in B V2 and V3 esphome#6079 by @Pofilo
• Add combination sensor and remove absorbed kalman_combinator component esphome#5438 by @kahrendt (new-integration) (breaking-change)
• Bump platformio from 6.1.11 to 6.1.13 esphome#6086 by @dependabot[bot]
• Bump actions/cache from 3.3.2 to 4.0.0 esphome#6110 by @dependabot[bot]
• Enable networking and some other components on host platform esphome#6114 by @clydebarrow
• Fix time component for host platform esphome#6118 by @clydebarrow
• Add quad spi features esphome#5925 by @clydebarrow
• add AM2120 device type esphome#6115 by @alexbuit
• Add support for Waveshare EPD 2.13" V3 esphome#5363 by @clydebarrow
• OTA 2 which confirm each written chunk esphome#6066 by @tomaszduda23
• Remove optional<> for pointer types esphome#6120 by @kroimon
• Improve temperature precision in BME280 and BMP280 esphome#6124 by @jxl77
• Nextion TFT upload IDF memory optimization esphome#6128 by @edwardtfn
• Add support for Pico-ResTouch-LCD-3.5 to ili9xxx driver esphome#6129 by @clydebarrow
• Ensure filename is shown when YAML raises an error esphome#6139 by @bdraco
• ILI9XXX: Restore offset usage in set_addr_window esphome#6147 by @clydebarrow
• Minimum 1 for full_update_every to prevent IntegerDivideByZero. esphome#6150 by @RubenNL
• Support tri-color waveshare eink displays 2.7inch B and B V2 esphome#4238 by @rnauber
• Synchronise Device Classes from Home Assistant esphome#6158 by @esphomebot
• dfrobot_sen0395: Use setLatency instead of outputLatency esphome#5665 by @jfroy
• Add some components to the new testing framework (A part 1) esphome#6142 by @kbx81
• WRGB or RGBW? WS2814 esphome#6164 by @mhetzi
• Add some components to the new testing framework (A part 2) esphome#6162 by @kbx81
• Bump aioesphomeapi to 21.0.2 esphome#6188 by @bdraco
• Add some components to the new testing framework (B) esphome#6173 by @kbx81
• Add "transformer_active" flag for use in effects. esphome#6157 by @TikiBill
• CSE7766: fix power and current measurements at low loads esphome#6180 by @twasilczyk
• host platform: improvements and bugfixes esphome#6137 by @clydebarrow
• WLED Sync fix and BK72XX support esphome#6190 by @ChuckMash
• Add missing vector.h for lightwaverf esphome#6196 by @kbx81
• Add some components to the new testing framework (C) esphome#6174 by @kbx81
• update docstrings in cpp_generator.py esphome#6212 by @nielsnl68
• Fixed group mask logic for WLED Sync fix esphome#6193 by @ChuckMash
• Add micro_wake_word component esphome#6136 by @kahrendt (new-integration)
• AUTO_LOAD sensor for shelly_dimmer esphome#6223 by @kbx81
• Add more debugging logs to microWakeWord esphome#6238 by @kahrendt
• Fix to RF receiver for Drayton Digistat heating controller esphome#6235 by @marshn
• WRGB Use correct multiplier esphome#6237 by @mhetzi
• Add optional minimum esphome version to microWakeWord manifest esphome#6240 by @jesserockz
• Fix xl9535 pin reads esphome#6242 by @jesserockz
• hold interrupt disable for dallas one-wire esphome#6244 by @ssieb
• Fix tm1651 enum esphome#6248 by @kbx81
• Clear UART read buffer before sending next command esphome#6200 by @fototakas
• Voice Assistant: add on_idle trigger and fix nevermind esphome#6141 by @synesthesiam
• Tuya Fan component fix to handle enum datapoint type esphome#6135 by @sibowler

• hold interrupt disable for dallas one-wire esphome#6244 by @ssieb
• Fix tm1651 enum esphome#6248 by @kbx81
• Clear UART read buffer before sending next command esphome#6200 by @fototakas
• Voice Assistant: add on_idle trigger and fix nevermind esphome#6141 by @synesthesiam
• Tuya Fan component fix to handle enum datapoint type esphome#6135 by @sibowler

• AUTO_LOAD sensor for shelly_dimmer esphome#6223 by @kbx81
• Add more debugging logs to microWakeWord esphome#6238 by @kahrendt
• Fix to RF receiver for Drayton Digistat heating controller esphome#6235 by @marshn
• WRGB Use correct multiplier esphome#6237 by @mhetzi
• Add optional minimum esphome version to microWakeWord manifest esphome#6240 by @jesserockz
• Fix xl9535 pin reads esphome#6242 by @jesserockz

• Bump esptool from 4.6.2 to 4.7.0 esphome#5935 by @dependabot[bot]
• Bump actions/download-artifact from 3.0.2 to 4.0.0 esphome#5936 by @dependabot[bot]
• Bump build-image action versions esphome#5954 by @jesserockz
• Revert "Bump build-image action versions" esphome#5955 by @jesserockz
• Revert "Bump actions/download-artifact from 3.0.2 to 4.0.0" esphome#5956 by @jesserockz
• Bump zeroconf from 0.130.0 to 0.131.0 esphome#5967 by @dependabot[bot]
• Add ability to lock to set mode esphome#5924 by @ysmilda
• feat: add AS5600 component/sensor esphome#5174 by @ammmze (new-integration)
• Add default substitutions for package includes esphome#5752 by @mknjc
• Add gradient option to addressable color wipe effect esphome#5689 by @lifeisafractal
• Added alarm processing for Haier component (hOn protocol) esphome#5965 by @paveldn
• Allow haier remote protocol to use lambdas esphome#5898 by @catlee
• PMSx003 add relevant device and state classes to default config esphome#5633 by @wheimbigner (breaking-change)
• Add waveshare 2.7in V2 model esphome#5903 by @gumulka
• Add support for waveshare 2.9in B V3 version esphome#5902 by @gumulka
• Fix pin reuse in test1 esphome#5978 by @jesserockz
• Add Waveshare 1.47in 172x320 to ST7789v component esphome#5884 by @mrtoy-me
• (fingerprint_grow) Added on_finger_scan_invalid automation. esphome#5885 by @RubenNL
• Alarm panel: Add changes to support enhanced features esphome#5671 by @hwstar
• support default pins for adafruit esp32 feather v2 esphome#5482 by @sbrudenell
• Bug: Unwanted change resistance in x9c component esphome#5483 by @fizista
• Improvements to RF receiver for Drayton Digistat heating controller esphome#5504 by @marshn
• Reduce memory usage with StringRef in MQTT Components esphome#5719 by @kahrendt
• Nextion allow underscore on names esphome#5979 by @edwardtfn
• Add Keeloq RF protocol esphome#5511 by @marshn
• Add a Binary Sensor Filter for state settling esphome#5900 by @cottsay
• Lint the script folder files esphome#5991 by @jesserockz
• web_server support for home assistant like styling esphome#5854 by @afarago
• [Touchscreen] Add expire of touch record. esphome#5986 by @Fabian-Schmidt
• Support for ST7567 display 128x64 (I2C, SPI) esphome#5952 by @latonita (new-integration)
• Add constants used by multiple display drivers to global const.py esphome#6033 by @clydebarrow
• Nextion queue size esphome#6029 by @edwardtfn
• Ble client additions and fixes esphome#5277 by @clydebarrow
• HaierProtocol library updated to 0.9.25 to fix the answer_timeout bug esphome#6015 by @paveldn
• GT911 touchscreen: Fix bug causing touch button release to fail esphome#6042 by @clydebarrow
• Display: Introduce draw_pixels_at() method for fast block display rendering esphome#6034 by @clydebarrow
• clang-format and clang-tidy scripts: More robust algorithm to find correct executable esphome#6041 by @clydebarrow
• Don't crash with invalid adc pin esphome#6059 by @ssieb
• Add questionmark to default glyphs. esphome#6053 by @RubenNL
• pylontech: fix voltage_low and voltage_high wrong unit esphome#6060 by @functionpointer
• Bump flake8 from 6.1.0 to 7.0.0 esphome#6058 by @dependabot[bot]
• Nextion enable upload from https when using esp-idf esphome#6051 by @edwardtfn
• Extends UART change at runtime to ESP8266 esphome#6019 by @edwardtfn
• Nextion draw QR code at runtime esphome#6027 by @edwardtfn
• Extend i2s config options esphome#6056 by @Hadatko
• Add getter for image data_start esphome#6036 by @clydebarrow
• Bump hypothesis to 6.92.1 esphome#6011 by @bdraco
• Bump recommended ESP32 IDF to 4.4.6 esphome#6048 by @bdraco
• Bump pytest from 7.4.3 to 7.4.4 esphome#6046 by @dependabot[bot]
• dashboard: refactor ping implementation to be more efficient esphome#6002 by @bdraco
• Bump pytest-asyncio from 0.23.2 to 0.23.3 esphome#6047 by @dependabot[bot]
• Bump black from 23.12.0 to 23.12.1 esphome#6018 by @dependabot[bot]
• Run python tests on windows and macos esphome#6010 by @bdraco
• BME280 SPI esphome#5538 by @apbodrov (new-integration) (breaking-change)
• Actions to enable and disable WireGuard connection esphome#5690 by @droscy
• hydreon_rgxx - fix missing cg.add(var.set_model(...)) esphome#6065 by @mrtoy-me
• Bump pillow to 10.2.0. esphome#6091 by @pfrenssen
• convert cse7766 to non-polling esphome#6095 by @ssieb (breaking-change)
• Use touch state from ft63x6 driver. esphome#6055 by @nielsnl68
• update script/setup so it works fine on windows esphome#6087 by @nielsnl68
• add Pico-ResTouch-LCD-3.5 esphome#6078 by @nielsnl68
• Revert "add Pico-ResTouch-LCD-3.5" esphome#6098 by @nielsnl68
• Add triangle shapes to display component esphome#6096 by @mathieu-mp
• Fingerprint_grow: Trigger on finger scan start and on finger scan misplaced esphome#6003 by @alexborro
• Add continuous option to the graph esphome#6093 by @ssieb
• Add NFC binary sensor platform esphome#6068 by @kbx81
• Socket: Add recvfrom method to receive UDP with source address. esphome#6103 by @clydebarrow
• Add support for VEML3235 lux sensor esphome#5959 by @kbx81 (new-integration)
• CV: tidy up Schema wrapper esphome#6105 by @jesserockz
• Add support X.509 client certificates for MQTT. esphome#5778 by @h2zero
• Fix color observation for triangle outline in display component esphome#6107 by @mathieu-mp
• Add support of Honeywell HumidIcon (I2C HIH series) Temperature & Humidity sensor esphome#5730 by @Benichou34 (new-integration)
• Proposal: Test yaml for each component esphome#5398 by @Fabian-Schmidt
• WiFi fast_connect: save/load BSSID and channel for faster connect from sleep esphome#5931 by @rguca
• Fixes Waveshare 7.5in B V2 and V3 esphome#6079 by @Pofilo
• Add combination sensor and remove absorbed kalman_combinator component esphome#5438 by @kahrendt (new-integration) (breaking-change)
• Bump platformio from 6.1.11 to 6.1.13 esphome#6086 by @dependabot[bot]
• Bump actions/cache from 3.3.2 to 4.0.0 esphome#6110 by @dependabot[bot]
• Enable networking and some other components on host platform esphome#6114 by @clydebarrow
• Fix time component for host platform esphome#6118 by @clydebarrow
• Add quad spi features esphome#5925 by @clydebarrow
• add AM2120 device type esphome#6115 by @alexbuit
• Add support for Waveshare EPD 2.13" V3 esphome#5363 by @clydebarrow
• OTA 2 which confirm each written chunk esphome#6066 by @tomaszduda23
• Remove optional<> for pointer types esphome#6120 by @kroimon
• Improve temperature precision in BME280 and BMP280 esphome#6124 by @jxl77
• Nextion TFT upload IDF memory optimization esphome#6128 by @edwardtfn
• Add support for Pico-ResTouch-LCD-3.5 to ili9xxx driver esphome#6129 by @clydebarrow
• Ensure filename is shown when YAML raises an error esphome#6139 by @bdraco
• ILI9XXX: Restore offset usage in set_addr_window esphome#6147 by @clydebarrow
• Minimum 1 for full_update_every to prevent IntegerDivideByZero. esphome#6150 by @RubenNL
• Support tri-color waveshare eink displays 2.7inch B and B V2 esphome#4238 by @rnauber
• Synchronise Device Classes from Home Assistant esphome#6158 by @esphomebot
• dfrobot_sen0395: Use setLatency instead of outputLatency esphome#5665 by @jfroy
• Add some components to the new testing framework (A part 1) esphome#6142 by @kbx81
• WRGB or RGBW? WS2814 esphome#6164 by @mhetzi
• Add some components to the new testing framework (A part 2) esphome#6162 by @kbx81
• Bump aioesphomeapi to 21.0.2 esphome#6188 by @bdraco
• Add some components to the new testing framework (B) esphome#6173 by @kbx81
• Add "transformer_active" flag for use in effects. esphome#6157 by @TikiBill
• CSE7766: fix power and current measurements at low loads esphome#6180 by @twasilczyk
• host platform: improvements and bugfixes esphome#6137 by @clydebarrow
• WLED Sync fix and BK72XX support esphome#6190 by @ChuckMash
• Add missing vector.h for lightwaverf esphome#6196 by @kbx81
• Add some components to the new testing framework (C) esphome#6174 by @kbx81
• update docstrings in cpp_generator.py esphome#6212 by @nielsnl68
• Fixed group mask logic for WLED Sync fix esphome#6193 by @ChuckMash
• Add micro_wake_word component esphome#6136 by @kahrendt (new-integration)

• fix sen5x negative temperature esphome#6082 by @ssieb
• negative values for all DHT22 variants esphome#6074 by @ssieb
• fix negative temperature for pmsx003 esphome#6083 by @ssieb
• fix: negative temperatures on PMS5003T sensors esphome#6100 by @aschmitz

• Let show_*_page actions depend on "Display" esphome#6092 by @guillempages
• Fix some Voice Assistant bugs esphome#6121 by @jesserockz

• Fix RMT timing clock base esphome#6101 by @majkrzak
• Create RingBuffer for VoiceAssistant esphome#6102 by @jesserockz
• Inkplate6: Fix crash with initial set of greyscale esphome#6038 by @clydebarrow

• Fix device not requesting Home Assistant time at the update interval esphome#6022 by @bdraco
• fix compilation error for libretiny esphome#6064 by @tomaszduda23
• pylontech: Fix parsing error with US2000 esphome#6061 by @functionpointer
• Support full (>460 char) dumps of Pronto IR commands esphome#6040 by @rpaskowitz
• ESP32-C3 USB_CDC fixes esphome#6069 by @kbx81
• Improv Serial -- don't wait for incoming bytes esphome#6089 by @kbx81
• add STATE_CLASS_TOTAL_INCREASING to bl0940 and bl0942 esphome#6090 by @tomaszduda23
• Fallback to pure-python loader for better error when YAML loading fails esphome#6081 by @bdraco

• Fix docker builds esphome#6012 by @bdraco

• dashboard: Only ping when polling is active esphome#6001 by @bdraco
• tt21100: restore init read esphome#6008 by @nielsnl68
• dashboard: Fix file writes on Windows esphome#6013 by @bdraco
• Display: fix class inherence in Python script esphome#6009 by @nielsnl68