Esphome Versions Save

• [Tuya Climate] Fix compilation error caused by codegen esphome#6568 by @zry98
• wifi: fix reconnect issue due to enablement of fast connect esphome#6598 by @jpeletier
• Calibrate Beken internal temperature esphome#6599 by @Mat931
• fix streaming logs from MQTT for ESP32 devices using TLS esphome#6605 by @ccutrer
• Disallow variant/family override for known boards esphome#6512 by @clydebarrow
• esp32_ble: Consider ESP_BT_STATUS_DONE a successful state esphome#6493 by @polyfloyd
• Fix or filter esphome#6574 by @swoboda1337

Full list of changes

New Components

• Add sun_gtil2 component (for SUN-1000G2 / SUN-2000G2 grid tie inverters) esphome#4958 by @Mat931 (new-integration)
• Add support for AT581x component esphome#6297 by @X-Ryl669 (new-integration)
• Add new Component: Ultrasonic Distance Sensor JSN-SR04T esphome#6023 by @Mafus1 (new-integration)
• feat: Add Daikin ARC (tested on Daikin ARC472A62) esphome#6429 by @magicbear (new-integration)
• add support for Tuya pink version of miflora esphome#5402 by @fariouche (new-integration)
• Implemented support for the TLC5971 as an output component esphome#6494 by @IJIJI (new-integration)

Breaking Changes

• Add support for new modes in Tuya Climate esphome#5159 by @moriahmorgan (breaking-change)
• IPv6 string representation follows RFC5952 esphome#6449 by @HeMan (breaking-change)

Beta Changes

• Add dooya remote transmitter test esphome#6508 by @jesserockz
• ads1115: remove auto-load and split sensor into platform folder esphome#5981 by @jesserockz
• Bump esphome-dashboard to 20240412.0 esphome#6517 by @jesserockz
• Fix missing ifdefs in voice assistant esphome#6520 by @jesserockz
• Fix project version longer than 30 characters breaking compilation esphome#6535 by @jesserockz
• Fix no-release bug on ft6x36 esphome#6527 by @clydebarrow

All changes

• Bump docker/login-action from 3.0.0 to 3.1.0 esphome#6367 by @dependabot[bot]
• Bump peter-evans/create-pull-request from 6.0.1 to 6.0.2 esphome#6361 by @dependabot[bot]
• Bump docker/build-push-action from 5.2.0 to 5.3.0 in /.github/actions/build-image esphome#6373 by @dependabot[bot]
• Bump docker/setup-buildx-action from 3.1.0 to 3.2.0 esphome#6372 by @dependabot[bot]
• Fix deep_sleep for ESP32-C6 esphome#6377 by @ferrets6
• Fix keeloq for IDF 5+ esphome#6382 by @kbx81
• Fix Nextion set_component_picture call esphome#6378 by @edwardtfn
• Add line_at_angle method to Display component esphome#6381 by @deisterhold
• Check generated proto files are as expected if any are modified in PRs esphome#6254 by @jesserockz
• ld2420: fix energy mode documentation esphome#6225 by @andresv
• Add actions for component tests A, B and C esphome#6256 by @kbx81
• Add some components to the new testing framework (V) esphome#6231 by @kbx81
• Add some components to the new testing framework (X,Y,Z) esphome#6233 by @kbx81
• Add some components to the new testing framework (E) esphome#6176 by @kbx81
• Make SPI compile with IDF >= 5.0 esphome#6383 by @HeMan
• Fix esp32-camera test yaml esphome#6398 by @kbx81
• Bump pytest-asyncio from 0.23.5.post1 to 0.23.6 esphome#6402 by @dependabot[bot]
• Bump actions/cache from 4.0.1 to 4.0.2 in /.github/actions/restore-python esphome#6403 by @dependabot[bot]
• Bump actions/cache from 4.0.1 to 4.0.2 esphome#6404 by @dependabot[bot]
• Bump ESP8266 Arduino versions esphome#5359 by @HeMan
• Allow accept/reject delta to be specified. esphome#5060 by @cvwillegen
• Allow setting htop for ledc esphome#6340 by @Gagootron
• sm2135: add separate_modes option to support different chip variants esphome#6152 by @jasperro
• AHT10: fix temperature-only operation; add warning/error messages esphome#6405 by @clydebarrow
• Add support for new modes in Tuya Climate esphome#5159 by @moriahmorgan (breaking-change)
• Add sun_gtil2 component (for SUN-1000G2 / SUN-2000G2 grid tie inverters) esphome#4958 by @Mat931 (new-integration)
• SPI: Make some validation failures give more useful messages. esphome#6413 by @clydebarrow
• Bump aioesphomeapi from 23.1.1 to 23.2.0 esphome#6412 by @dependabot[bot]
• Add check for use of GPIOXX in config esphome#6419 by @clydebarrow
• WireGuard for esp8266 esphome#6365 by @droscy
• setup.cfg: drop duplicate, underintended trove classifier esphome#6421 by @mweinelt
• Store preferences in disk file on host platform esphome#6428 by @clydebarrow
• Add support for AT581x component esphome#6297 by @X-Ryl669 (new-integration)
• Add some components to the new testing framework (F) esphome#6177 by @kbx81
• Add get_contrast() and get_brightness() to SSD1306 class to get protected variables esphome#6435 by @benediktkr
• Add new Component: Ultrasonic Distance Sensor JSN-SR04T esphome#6023 by @Mafus1 (new-integration)
• Add some components to the new testing framework (G) esphome#6178 by @kbx81
• Add some components to the new testing framework (K) esphome#6186 by @kbx81
• Add some components to the new testing framework (N) esphome#6210 by @kbx81
• Add some components to the new testing framework (Q) esphome#6218 by @kbx81
• Add some components to the new testing framework (U) esphome#6230 by @kbx81
• Fix spacing in new test yaml esphome#6441 by @kbx81
• Add some components to the new testing framework (W) esphome#6232 by @kbx81
• Add some components to the new testing framework (L) esphome#6195 by @kbx81
• feat: Add Daikin ARC (tested on Daikin ARC472A62) esphome#6429 by @magicbear (new-integration)
• Disable truthy yamllint rule esphome#6442 by @jesserockz
• Add get_size method to QR Code header esphome#6430 by @deisterhold
• Minor change to support sht85 sensor esphome#6415 by @mrtoy-me
• IPv6 string representation follows RFC5952 esphome#6449 by @HeMan (breaking-change)
• Bump actions/setup-python from 5.0.0 to 5.1.0 esphome#6437 by @dependabot[bot]
• Bump actions/setup-python from 5.0.0 to 5.1.0 in /.github/actions/restore-python esphome#6438 by @dependabot[bot]
• Optimize QMC5883L: Read registers only for enabled sensors esphome#6458 by @tronikos
• minor refactor to allow commit hash as ref value. esphome#6446 by @LelandSindt
• TMP117 fix polling period config esphome#6452 by @mrtoy-me
• Bump Arduino Pico Framework to 3.7.2 and Platform to 1.12.0 esphome#6386 by @HeMan
• Display menu: Allow "left" key to exit current menu if not editing esphome#6460 by @jesserockz
• Fix NOLINT on inclusive-language check esphome#6464 by @jesserockz
• Add yamllint to dev requirements esphome#6466 by @jesserockz
• Add temperature for QMC5883L esphome#6456 by @tronikos
• web_server: Return early if no clients connected esphome#6467 by @jesserockz
• ESP32 Arduino WiFi: misc bug fixes esphome#6470 by @paravoid
• Replace std::regex with sscanf calls esphome#6468 by @jesserockz
• Include "Failed" status in config log. esphome#6482 by @clydebarrow
• Fix Microphone IsCapturingCondition esphome#6490 by @RaymiiOrg
• Remove misleading tag/line in messages esphome#6495 by @clydebarrow
• Send/Receive Voice Assistant audio via API esphome#6471 by @jesserockz
• Datetime date initial value fix esphome#6483 by @RFDarter
• If the loop() took more than the required time, don't delay further esphome#6496 by @clydebarrow
• Bump LibreTiny version to 1.5.1 esphome#6500 by @kuba2k2
• Internal temperature: Support Beken platform esphome#6491 by @Mat931
• Bump docker/setup-buildx-action from 3.2.0 to 3.3.0 esphome#6502 by @dependabot[bot]
• add support for Tuya pink version of miflora esphome#5402 by @fariouche (new-integration)
• Add MAC address to WiFi config reply esphome#6489 by @cvwillegen
• Adds i2c timeout config esphome#4614 by @tracestep
• Add ABB-Welcome / Busch-Welcome Door Intercom Protocol esphome#4689 by @Mat931
• Add support for time entities esphome#6399 by @jesserockz
• Fix Match by IRK esphome#6499 by @MRemy2
• Add rmt_channel to remote_transmitter and remote_receiver esphome#6497 by @jesserockz
• Rework tlc5947 to remove AUTO_LOAD esphome#6503 by @jesserockz
• UART: ignore require_tx/rx if not a native uart implementation esphome#6504 by @jesserockz
• esp32_rmt_led_strip bugfixes esphome#6506 by @Mat931
• Implemented support for the TLC5971 as an output component esphome#6494 by @IJIJI (new-integration)
• Add Dooya protocol to remote_base esphome#6488 by @bukureckid
• Only give error for connected sensors at startup esphome#6474 by @leejoow
• Webserver float to string fix esphome#6507 by @RFDarter
• Add dooya remote transmitter test esphome#6508 by @jesserockz
• ads1115: remove auto-load and split sensor into platform folder esphome#5981 by @jesserockz
• Bump esphome-dashboard to 20240412.0 esphome#6517 by @jesserockz
• Fix missing ifdefs in voice assistant esphome#6520 by @jesserockz
• Fix project version longer than 30 characters breaking compilation esphome#6535 by @jesserockz
• Fix no-release bug on ft6x36 esphome#6527 by @clydebarrow

• Fix missing ifdefs in voice assistant esphome#6520 by @jesserockz
• Fix project version longer than 30 characters breaking compilation esphome#6535 by @jesserockz
• Fix no-release bug on ft6x36 esphome#6527 by @clydebarrow

• Add dooya remote transmitter test esphome#6508 by @jesserockz
• ads1115: remove auto-load and split sensor into platform folder esphome#5981 by @jesserockz (new-platform)
• Bump esphome-dashboard to 20240412.0 esphome#6517 by @jesserockz

• Bump docker/login-action from 3.0.0 to 3.1.0 esphome#6367 by @dependabot[bot]
• Bump peter-evans/create-pull-request from 6.0.1 to 6.0.2 esphome#6361 by @dependabot[bot]
• Bump docker/build-push-action from 5.2.0 to 5.3.0 in /.github/actions/build-image esphome#6373 by @dependabot[bot]
• Bump docker/setup-buildx-action from 3.1.0 to 3.2.0 esphome#6372 by @dependabot[bot]
• Fix deep_sleep for ESP32-C6 esphome#6377 by @ferrets6
• Fix keeloq for IDF 5+ esphome#6382 by @kbx81
• Fix Nextion set_component_picture call esphome#6378 by @edwardtfn
• Add line_at_angle method to Display component esphome#6381 by @deisterhold
• Check generated proto files are as expected if any are modified in PRs esphome#6254 by @jesserockz
• ld2420: fix energy mode documentation esphome#6225 by @andresv
• Add actions for component tests A, B and C esphome#6256 by @kbx81
• Add some components to the new testing framework (V) esphome#6231 by @kbx81
• Add some components to the new testing framework (X,Y,Z) esphome#6233 by @kbx81
• Add some components to the new testing framework (E) esphome#6176 by @kbx81
• Make SPI compile with IDF >= 5.0 esphome#6383 by @HeMan
• Fix esp32-camera test yaml esphome#6398 by @kbx81
• Bump pytest-asyncio from 0.23.5.post1 to 0.23.6 esphome#6402 by @dependabot[bot]
• Bump actions/cache from 4.0.1 to 4.0.2 in /.github/actions/restore-python esphome#6403 by @dependabot[bot]
• Bump actions/cache from 4.0.1 to 4.0.2 esphome#6404 by @dependabot[bot]
• Bump ESP8266 Arduino versions esphome#5359 by @HeMan
• Allow accept/reject delta to be specified. esphome#5060 by @cvwillegen
• Allow setting htop for ledc esphome#6340 by @Gagootron
• sm2135: add separate_modes option to support different chip variants esphome#6152 by @jasperro
• AHT10: fix temperature-only operation; add warning/error messages esphome#6405 by @clydebarrow
• Add support for new modes in Tuya Climate esphome#5159 by @moriahmorgan (breaking-change)
• Add sun_gtil2 component (for SUN-1000G2 / SUN-2000G2 grid tie inverters) esphome#4958 by @Mat931 (new-integration)
• SPI: Make some validation failures give more useful messages. esphome#6413 by @clydebarrow
• Bump aioesphomeapi from 23.1.1 to 23.2.0 esphome#6412 by @dependabot[bot]
• Add check for use of GPIOXX in config esphome#6419 by @clydebarrow
• WireGuard for esp8266 esphome#6365 by @droscy
• setup.cfg: drop duplicate, underintended trove classifier esphome#6421 by @mweinelt
• Store preferences in disk file on host platform esphome#6428 by @clydebarrow
• Add support for AT581x component esphome#6297 by @X-Ryl669 (new-integration)
• Add some components to the new testing framework (F) esphome#6177 by @kbx81
• Add get_contrast() and get_brightness() to SSD1306 class to get protected variables esphome#6435 by @benediktkr
• Add new Component: Ultrasonic Distance Sensor JSN-SR04T esphome#6023 by @Mafus1 (new-integration)
• Add some components to the new testing framework (G) esphome#6178 by @kbx81
• Add some components to the new testing framework (K) esphome#6186 by @kbx81
• Add some components to the new testing framework (N) esphome#6210 by @kbx81
• Add some components to the new testing framework (Q) esphome#6218 by @kbx81
• Add some components to the new testing framework (U) esphome#6230 by @kbx81
• Fix spacing in new test yaml esphome#6441 by @kbx81
• Add some components to the new testing framework (W) esphome#6232 by @kbx81
• Add some components to the new testing framework (L) esphome#6195 by @kbx81
• feat: Add Daikin ARC (tested on Daikin ARC472A62) esphome#6429 by @magicbear (new-integration)
• Disable truthy yamllint rule esphome#6442 by @jesserockz
• Add get_size method to QR Code header esphome#6430 by @deisterhold
• Minor change to support sht85 sensor esphome#6415 by @mrtoy-me
• IPv6 string representation follows RFC5952 esphome#6449 by @HeMan (breaking-change)
• Bump actions/setup-python from 5.0.0 to 5.1.0 esphome#6437 by @dependabot[bot]
• Bump actions/setup-python from 5.0.0 to 5.1.0 in /.github/actions/restore-python esphome#6438 by @dependabot[bot]
• Optimize QMC5883L: Read registers only for enabled sensors esphome#6458 by @tronikos
• minor refactor to allow commit hash as ref value. esphome#6446 by @LelandSindt
• TMP117 fix polling period config esphome#6452 by @mrtoy-me
• Bump Arduino Pico Framework to 3.7.2 and Platform to 1.12.0 esphome#6386 by @HeMan
• Display menu: Allow "left" key to exit current menu if not editing esphome#6460 by @jesserockz
• Fix NOLINT on inclusive-language check esphome#6464 by @jesserockz
• Add yamllint to dev requirements esphome#6466 by @jesserockz
• Add temperature for QMC5883L esphome#6456 by @tronikos
• web_server: Return early if no clients connected esphome#6467 by @jesserockz
• ESP32 Arduino WiFi: misc bug fixes esphome#6470 by @paravoid
• Replace std::regex with sscanf calls esphome#6468 by @jesserockz
• Include "Failed" status in config log. esphome#6482 by @clydebarrow
• Fix Microphone IsCapturingCondition esphome#6490 by @RaymiiOrg
• Remove misleading tag/line in messages esphome#6495 by @clydebarrow
• Send/Receive Voice Assistant audio via API esphome#6471 by @jesserockz
• Datetime date initial value fix esphome#6483 by @RFDarter
• If the loop() took more than the required time, don't delay further esphome#6496 by @clydebarrow
• Bump LibreTiny version to 1.5.1 esphome#6500 by @kuba2k2
• Internal temperature: Support Beken platform esphome#6491 by @Mat931
• Bump docker/setup-buildx-action from 3.2.0 to 3.3.0 esphome#6502 by @dependabot[bot]
• add support for Tuya pink version of miflora esphome#5402 by @fariouche (new-integration)
• Add MAC address to WiFi config reply esphome#6489 by @cvwillegen
• Adds i2c timeout config esphome#4614 by @tracestep
• Add ABB-Welcome / Busch-Welcome Door Intercom Protocol esphome#4689 by @Mat931
• Add support for time entities esphome#6399 by @jesserockz
• Fix Match by IRK esphome#6499 by @MRemy2
• Add rmt_channel to remote_transmitter and remote_receiver esphome#6497 by @jesserockz (new-integration)
• Rework tlc5947 to remove AUTO_LOAD esphome#6503 by @jesserockz
• UART: ignore require_tx/rx if not a native uart implementation esphome#6504 by @jesserockz
• esp32_rmt_led_strip bugfixes esphome#6506 by @Mat931
• Implemented support for the TLC5971 as an output component esphome#6494 by @IJIJI (new-integration)
• Add Dooya protocol to remote_base esphome#6488 by @bukureckid
• Only give error for connected sensors at startup esphome#6474 by @leejoow
• Webserver float to string fix esphome#6507 by @RFDarter

• Fix logger compile error on ESP32-C6 esphome#6323 by @DAVe3283
• Add missing ethernet types esphome#6444 by @ssieb
• fix: changing the content source when playing is paused blocks the player esphome#6454 by @NewoPL

• AHT10: Fix bug esphome#6409 by @clydebarrow
• microWakeWord: Fix model path joining esphome#6426 by @ebw44
• Don't compile strptime unless its required esphome#6424 by @gabest11
• Fix editor live validation esphome#6431 by @bdraco

Full list of changes

New Components

• New component: ADE7880 voltage/current/power/energy sensor esphome#5242 by @kpfleming (new-integration)
• Add Uponor Smatrix component esphome#5769 by @kroimon (new-integration)
• Support for MS8607 PHT (Pressure Humidity Temperature) sensor esphome#3307 by @e28eta (new-integration)
• Add datetime date entities esphome#6191 by @RFDarter (new-integration)
• Add AGS10 Sensor esphome#6070 by @mak-42 (new-integration)
• ads1118 component esphome#5711 by @solomondg1 (new-integration)
• Add CST816 touchscreen driver esphome#5941 by @clydebarrow (new-integration)
• AM2315C Temperature + Humidity Sensor esphome#6266 by @swoboda1337 (new-integration)
• Touchscreen: add support for CST226 controller chip esphome#6151 by @clydebarrow (new-integration)
• Drivers for RGB 16 bit parallel displays esphome#5872 by @clydebarrow (new-integration)
• VEML7700 and VEML6030 light sensors esphome#6067 by @latonita (new-integration)
• Add Seeed Studio mmWave Kit MR24HPC1 esphome#5761 by @limengdu (new-integration)
• Add driver for quad SPI AMOLED displays esphome#6354 by @clydebarrow (new-integration)
• feat: Add HTU31D Support esphome#5805 by @betterengineering (new-integration)
• Emmeti infrared climate support esphome#5197 by @E440QF (new-integration)
• Added Kamstrup Multical 40x component esphome#4200 by @cfeenstra1024 (new-integration)

New Platforms

• Additional sensors and binary sensors support for Haier Climate esphome#6257 by @paveldn (breaking-change) (new-platform)
• add template fan esphome#6310 by @ssieb (breaking-change) (new-platform)

Breaking Changes

• LTR390 - Multiple bugfixes esphome#6161 by @sjtrny (breaking-change)
• Touchscreen component and driver fixes esphome#5997 by @nielsnl68 (breaking-change)
• Additional sensors and binary sensors support for Haier Climate esphome#6257 by @paveldn (breaking-change) (new-platform)
• add template fan esphome#6310 by @ssieb (breaking-change) (new-platform)

Beta Changes

• SPI: Revert clk_pin to standard output pin schema esphome#6368 by @clydebarrow
• Allow actions in web_server to be executed via GET method esphome#5938 by @afarago
• fix servo restore esphome#6370 by @ssieb
• Don't try to get IPv6 addresses when disabled esphome#6366 by @HeMan
• Use AQI device class esphome#6376 by @fgsch
• Fix list-components when PR is not targeting dev esphome#6375 by @jesserockz
• allow negative ppm for sensair esphome#6385 by @ssieb
• microWakeWord - add new ops and small improvements esphome#6360 by @kahrendt
• Fix compilation for uponor_smatrix without time component esphome#6389 by @kroimon
• Shows component operation time in ms esphome#6388 by @edwardtfn
• IPv6 can't be enabled for libretiny esphome#6387 by @HeMan
• Replace name and friendly name in full adopted configs esphome#4456 by @jesserockz
• Fix bug in remote_base conditional esphome#6281 by @swoboda1337
• Fix sending packets to uponor_smatrix devices esphome#6392 by @kroimon
• Fix wrong initialization of vectors in ade7953_i2c esphome#6393 by @kroimon
• ld2420: Firmware v1.5.4+ bug workaround esphome#6168 by @descipher
• Require xsrf/csrf when using a password esphome#6396 by @jesserockz
• AHT10: Use state machine to avoid blocking delay esphome#6401 by @clydebarrow
• Show component warnings and errors in the log; esphome#6400 by @clydebarrow
• web_server support for v3 esphome#6203 by @RFDarter

All changes

• Bump openssh-client to 1:9.2p1-2+deb12u2 esphome#6216 by @jesserockz
• Add support for 1.8V-powered devices esphome#6234 by @bisbastuner
• Adjust HeatpumpIR dependency esphome#6222 by @ivankravets
• INA226 - fixed improper work with signed values, added configurable ADC parameters esphome#6172 by @latonita
• Prevent network config on rpipico board esphome#5832 by @carlosV2
• Bump pytest-asyncio from 0.23.3 to 0.23.5 esphome#6201 by @dependabot[bot]
• New component: ADE7880 voltage/current/power/energy sensor esphome#5242 by @kpfleming (new-integration)
• Add some components to the new testing framework (D) esphome#6175 by @kbx81
• Provide example devcontainer config for mdns and USB passthrough esphome#6094 by @linkedupbits
• Bump black from 23.12.1 to 24.2.0 esphome#6221 by @dependabot[bot]
• Bump pytest from 7.4.4 to 8.0.1 esphome#6246 by @dependabot[bot]
• Bump codecov/codecov-action from 3 to 4 esphome#6160 by @dependabot[bot]
• Bump peter-evans/create-pull-request from 5.0.2 to 6.0.0 esphome#6159 by @dependabot[bot]
• Bump frenck/action-yamllint from 1.4.2 to 1.5.0 esphome#6236 by @dependabot[bot]
• Bump voluptuous from 0.14.1 to 0.14.2 esphome#6181 by @dependabot[bot]
• Bump pyupgrade from 3.15.0 to 3.15.1 esphome#6247 by @dependabot[bot]
• LTR390 - Multiple bugfixes esphome#6161 by @sjtrny (breaking-change)
• Fix yamllint esphome#6253 by @jesserockz
• Improve the error message on OTA version mismatch esphome#6259 by @sybrenstuvel
• Bump aioesphomeapi from 21.0.2 to 22.0.0 esphome#6263 by @dependabot[bot]
• Allow ESP8266 to use multiple i2c busses esphome#6145 by @LouDou
• Add Uponor Smatrix component esphome#5769 by @kroimon (new-integration)
• Fix test_build_components for macOS sed esphome#6278 by @kbx81
• Allow to specify global build directory esphome#6276 by @werwolfby
• Add device class support to text sensor esphome#6202 by @dougiteixeira
• Bump pytest from 8.0.1 to 8.0.2 esphome#6288 by @dependabot[bot]
• Improve dualstack and IPv6 support esphome#5449 by @HeMan
• Waveshare e-ink 2IN9_V2 - fix full and partial update based on vendor… esphome#5481 by @darianndd
• Add RTTTL volume control. esphome#5968 by @nielsnl68
• Touchscreen component and driver fixes esphome#5997 by @nielsnl68 (breaking-change)
• Add on_update trigger for Project versions esphome#6298 by @jesserockz
• Bump peter-evans/create-pull-request from 6.0.0 to 6.0.1 esphome#6302 by @dependabot[bot]
• CSE7766 Apparent Power & Power Factor calculations esphome#6292 by @DAVe3283
• Adding W5500 support to ethernet component esphome#4424 by @JeroenVanOort
• Fix numbering of ip_address sensors esphome#6305 by @HeMan
• Bump aioesphomeapi from 22.0.0 to 23.0.0 esphome#6293 by @dependabot[bot]
• Add regular polygon shapes to display component esphome#6108 by @mathieu-mp
• Fix return value in core/automation.h esphome#6314 by @FlyingFeng2021
• aht10: Added new CMD and renamed existing CMD to match datasheet esphome#6303 by @cptskippy
• handling with the negative temperature in the sensor tmp102 esphome#6316 by @FlyingFeng2021
• x9c: fix off by 1 error esphome#6318 by @andynumber2
• Support for MS8607 PHT (Pressure Humidity Temperature) sensor esphome#3307 by @e28eta (new-integration)
• Separate logger implementations for each hardware platform into different files esphome#6167 by @tomaszduda23
• Additional sensors and binary sensors support for Haier Climate esphome#6257 by @paveldn (breaking-change) (new-platform)
• Add toggle command to cover web_server endpoint esphome#6319 by @heythisisnate
• Improv: support connecting to hidden networks esphome#6322 by @jesserockz
• Update mDNS for IDF >= 5.0 esphome#6328 by @HeMan
• DFPlayer: refix Bug created with PR 4758 esphome#5861 by @sandronidi
• Fix build failures on host platform caused by #6167 esphome#6338 by @clydebarrow
• Update bang_bang to log two decimal places in config dump esphome#6304 by @rafalw1277
• Add datetime date entities esphome#6191 by @RFDarter (new-integration)
• Add AGS10 Sensor esphome#6070 by @mak-42 (new-integration)
• Bump aioesphomeapi from 23.0.0 to 23.1.0 esphome#6332 by @dependabot[bot]
• Bump pytest-asyncio from 0.23.5 to 0.23.5.post1 esphome#6334 by @dependabot[bot]
• Bump docker/setup-buildx-action from 3.0.0 to 3.1.0 esphome#6295 by @dependabot[bot]
• Set dependabot to look at composite actions versions esphome#6343 by @jesserockz
• ads1118 component esphome#5711 by @solomondg1 (new-integration)
• Bump actions/cache from 4.0.0 to 4.0.1 esphome#6306 by @dependabot[bot]
• Bump docker/build-push-action from 5.0.0 to 5.2.0 in /.github/actions/build-image esphome#6347 by @dependabot[bot]
• fix: modbus_textsensor response is too long in some cases esphome#6333 by @NewoPL
• add template fan esphome#6310 by @ssieb (breaking-change) (new-platform)
• dump config after logging CDC port is opened by host esphome#6169 by @tomaszduda23
• Add IRK support to allow tracking of devices with random MAC addresses esphome#6335 by @chbmuc
• [Fingerprint_grow] Implements Sleep Mode feature esphome#6116 by @alexborro
• cleanup ili9xxx component by removing data rate define esphome#6350 by @nielsnl68
• web_server_idf: support x-www-form-urlencoded POST requests esphome#6037 by @dentra
• feat(MQTT): Add QoS option for each MQTT component esphome#6279 by @Rapsssito
• Check permissions esphome#6255 by @OdileVidrine
• Add CST816 touchscreen driver esphome#5941 by @clydebarrow (new-integration)
• ILI9XXX: Lazily allocate buffer esphome#6352 by @clydebarrow
• AM2315C Temperature + Humidity Sensor esphome#6266 by @swoboda1337 (new-integration)
• Add ble_presence binary sensor timeout config value. esphome#6024 by @clydebarrow
• Add state listeners to rotary_encoder esphome#6035 by @clydebarrow
• ili9xxx: Add support for GC9A01A display esphome#6351 by @clydebarrow
• Touchscreen: add support for CST226 controller chip esphome#6151 by @clydebarrow (new-integration)
• font: add anti-aliasing and other features esphome#6198 by @clydebarrow
• Mhz19 warmup esphome#6214 by @fornellas
• Refactor ATM90E32 to reduce blocking time and improve accuracy. esphome#5670 by @descipher
• Bump aioesphomeapi from 23.1.0 to 23.1.1 esphome#6348 by @dependabot[bot]
• Bump pytest from 8.0.2 to 8.1.1 esphome#6346 by @dependabot[bot]
• Add support for Waveshare 2.13" V2 display esphome#6337 by @manuelkasper
• Mitsubishi Climate updates esphome#3886 by @RubyBailey
• Drivers for RGB 16 bit parallel displays esphome#5872 by @clydebarrow (new-integration)
• hydreon_rgxx - add resolution option esphome#6077 by @mrtoy-me
• SPI schema now uses typed_schema with type key esphome#6353 by @clydebarrow
• VEML7700 and VEML6030 light sensors esphome#6067 by @latonita (new-integration)
• Add Seeed Studio mmWave Kit MR24HPC1 esphome#5761 by @limengdu (new-integration)
• Add getter for font glyph data esphome#6355 by @clydebarrow
• Require reset_pin for certain waveshare_epaper models in YAML validation esphome#6357 by @manuelkasper
• touchscreen driver fixes esphome#6356 by @clydebarrow
• Make USE_HOST compilable on msys2 esphome#6359 by @maruel
• download font from url on build esphome#5254 by @landonr
• Add driver for quad SPI AMOLED displays esphome#6354 by @clydebarrow (new-integration)
• ADE7953: Add the ability to use accumulating energy registers, more precise power reporting esphome#6311 by @isorin
• feat: Add HTU31D Support esphome#5805 by @betterengineering (new-integration)
• Emmeti infrared climate support esphome#5197 by @E440QF (new-integration)
• Added Kamstrup Multical 40x component esphome#4200 by @cfeenstra1024 (new-integration)
• add possibility to provide different conversion times for Bus Voltage… esphome#6327 by @kev300
• SPI: Revert clk_pin to standard output pin schema esphome#6368 by @clydebarrow
• Allow actions in web_server to be executed via GET method esphome#5938 by @afarago
• fix servo restore esphome#6370 by @ssieb
• Don't try to get IPv6 addresses when disabled esphome#6366 by @HeMan
• Use AQI device class esphome#6376 by @fgsch
• Fix list-components when PR is not targeting dev esphome#6375 by @jesserockz
• allow negative ppm for sensair esphome#6385 by @ssieb
• microWakeWord - add new ops and small improvements esphome#6360 by @kahrendt
• Fix compilation for uponor_smatrix without time component esphome#6389 by @kroimon
• Shows component operation time in ms esphome#6388 by @edwardtfn
• IPv6 can't be enabled for libretiny esphome#6387 by @HeMan
• Replace name and friendly name in full adopted configs esphome#4456 by @jesserockz
• Fix bug in remote_base conditional esphome#6281 by @swoboda1337
• Fix sending packets to uponor_smatrix devices esphome#6392 by @kroimon
• Fix wrong initialization of vectors in ade7953_i2c esphome#6393 by @kroimon
• ld2420: Firmware v1.5.4+ bug workaround esphome#6168 by @descipher
• Require xsrf/csrf when using a password esphome#6396 by @jesserockz
• AHT10: Use state machine to avoid blocking delay esphome#6401 by @clydebarrow
• Show component warnings and errors in the log; esphome#6400 by @clydebarrow
• web_server support for v3 esphome#6203 by @RFDarter

• AHT10: Use state machine to avoid blocking delay esphome#6401 by @clydebarrow
• Show component warnings and errors in the log; esphome#6400 by @clydebarrow
• web_server support for v3 esphome#6203 by @RFDarter

• Fix bug in remote_base conditional esphome#6281 by @swoboda1337
• Fix sending packets to uponor_smatrix devices esphome#6392 by @kroimon
• Fix wrong initialization of vectors in ade7953_i2c esphome#6393 by @kroimon
• ld2420: Firmware v1.5.4+ bug workaround esphome#6168 by @descipher
• Require xsrf/csrf when using a password esphome#6396 by @jesserockz