SQLite3 library

Overview

Create / access SQLite3 database files using this library through SPIFFS / SD Cards.

For more information, please see https://github.com/siara-cc/esp32_arduino_sqlite3_lib

Installation

Install ESP-IDF sdk using instructions from https://docs.espressif.com/projects/esp-idf/en/latest/get-started/.

Unzip this project under esp-idf/components folder. Or if you are cloning the repository at https://github.com/espressif/esp-idf, add this repository as submodule using:

git submodule add https://github.com/siara-cc/esp32-idf-sqlite3 components/esp32-idf-sqlite3.

Using examples

1. Download esp-idf-v4.1.1.zip that includes submodules and unzip
2. cd esp-idf-v4.1.1, install using sudo ./install.sh
3. git submodule add https://github.com/siara-cc/esp32-idf-sqlite3 components/esp32-idf-sqlite3
4. git submodule add https://github.com/siara-cc/esp32-idf-sqlite3-examples examples/esp32-idf-sqlite3-examples
5. cd examples/esp32-idf-sqlite3-examples/spiffs
6. make flash
7. To check output, use miniterm.py <device> 115200 and reset board

Information specific to ESP-IDF

To check out how this library works, please try the examples using:

git submodule add https://github.com/siara-cc/esp32-idf-sqlite3-examples examples/esp32-idf-sqlite3-examples

For instance, to check how Sqlite3 databases can be created on SPIFFS, navigate to the folder examples/esp32-idf-sqlite3-examples/spiffs and invoke make flash.

Many configurations specific to SQLite library have been set in the sdkconfig.defaults file, such as:

• Increasing stack size
• Setting SPIFFS partition information
• Partition size

The Flash size has been assumed as 4MB for SPIFFS example. Please change any of these configurations if necessary.

Issues

If you face any issues, please contact the author (Arundale Ramanathan) at [email protected] or create a github issue.