Informations and examples about A.I. Thinker ESP32-CAM using ESP-IDF
The goal of this repository is to centralize information and examples for the ESP32-CAM A.I. Thinker.
Read the board and periferals specifications here.
ESP32-CAM A.I. Thinker usually sells with OV2640 sensor
To run the examples, make sure to have PlatformIO
installed. If you haven't, refer to this tutorial.
To flash the board you need a USB to TTL dongle.
Also it is very important to use a external power supply. USBs usually do not provide sufficient current which makes the board loops brownout
errors.
Diagram to wire the board
When flashing:
GPIO0
to GND
)When booting to run your sketch, keep GPIO0
open.
This board also has a built in reset button.
This board and the included OV2640 can acomplish the following:
The roadmap for this repository is to implement examples uppon the capabilities of the board.
Feel free to open issues, describe bugs, suggest new examples and implementations.
I'll be reviewing and accepting PR's.