Esp Homekit Devices Versions Save

Changelog 12.12.4:

• Improved reset HomeKit ID procedure.
• iAirZoning: Improved logic in "soft" states.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2.1 with many bug fixes.

Changelog 12.12.3:

• Setup mode: Fixed bug where extra pairings count was not removed when Reset HomeKit ID was used.

Changelog 12.12.2:

• ESP32-C3:
  • Added workaround to fix ESP-IDF v5.2 bug https://github.com/espressif/esp-idf/issues/13197

Changelog 12.12.1:

• Added some delays in installation process when SSL is used to help with bad WiFi environments.
• Improved button pulse mode even more.

Changelog 12.12.0:

• HomeKit: Fixed blocking remove/update pairings when extra pairing is added and device is not rebooted.
• HomeKit: Several improvements getting pairings count when extra pairings is used.
• Improved button pulse mode when pulse time is zero.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2 with many improvements and bug fixes.
  • Improved critical task locks.
  • DHT and DS18B20 sensors: improved GPIO initialization.

Read Wiki for more info.

Changelog 12.12.3:

• Setup mode: Fixed bug where extra pairings count was not removed when Reset HomeKit ID was used.

Changelog 12.12.2:

• ESP32-C3:
  • Added workaround to fix ESP-IDF v5.2 bug https://github.com/espressif/esp-idf/issues/13197

Changelog 12.12.1:

• Added some delays in installation process when SSL is used to help with bad WiFi environments.
• Improved button pulse mode even more.

Changelog 12.12.0:

• HomeKit: Fixed blocking remove/update pairings when extra pairing is added and device is not rebooted.
• HomeKit: Several improvements getting pairings count when extra pairings is used.
• Improved button pulse mode when pulse time is zero.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2 with many improvements and bug fixes.
  • Improved critical task locks.
  • DHT and DS18B20 sensors: improved GPIO initialization.

Read Wiki for more info.

Changelog 12.12.2:

• ESP32-C3:
  • Added workaround to fix ESP-IDF v5.2 bug https://github.com/espressif/esp-idf/issues/13197

Changelog 12.12.1:

• Added some delays in installation process when SSL is used to help with bad WiFi environments.
• Improved button pulse mode even more.

Changelog 12.12.0:

• HomeKit: Fixed blocking remove/update pairings when extra pairing is added and device is not rebooted.
• HomeKit: Several improvements getting pairings count when extra pairings is used.
• Improved button pulse mode when pulse time is zero.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2 with many improvements and bug fixes.
  • Improved critical task locks.
  • DHT and DS18B20 sensors: improved GPIO initialization.

Read Wiki for more info.

Changelog 12.12.1:

• Added some delays in installation process when SSL is used to help with bad WiFi environments.
• Improved button pulse mode even more.

Changelog 12.12.0:

• HomeKit: Fixed blocking remove/update pairings when extra pairing is added and device is not rebooted.
• HomeKit: Several improvements getting pairings count when extra pairings is used.
• Improved button pulse mode when pulse time is zero.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2 with many improvements and bug fixes.
  • Improved critical task locks.
  • DHT and DS18B20 sensors: improved GPIO initialization.

Read Wiki for more info.

Changelog 12.12.0:

• HomeKit: Fixed blocking remove/update pairings when extra pairing is added and device is not rebooted.
• HomeKit: Several improvements getting pairings count when extra pairings is used.
• Improved button pulse mode when pulse time is zero.
• ESP32, ESP32-C and ESP32-S:
  • Updated SDK version to ESP-IDF 5.2 with many improvements and bug fixes.
  • Improved critical task locks.
  • DHT and DS18B20 sensors: improved GPIO initialization.

Read Wiki for more info.

Changelog 12.11.4:

• Setup mode: Fixed bug where WiFi AP was not enable under certain circumstances.
• HomeKit: Now updating/removing pairings function is disable to prevent undesired changes when extra pairings is used.
• HomeKit: Added more logs about pairings operations.
• DHT sensors: Improved driver with official datasheets information.

Changelog 12.11.3:

• HomeKit: Fixed TLV format bug when processing TLV NULL value that causes a memory overflow.

Changelog 12.11.2:

• Setup mode: Fixed bug that disables WiFi AP without user request.
• HomeKit: Added several DRAM guards.
• HomeKit: Fixed TLV parse bug when processing TLV NULL value that causes a system crash.
• HomeKit: Fixed bug on storage when compacting data.
• ESP8266:
  • WiFi: Fixed bug that avoid to set PHY mode to 802.11N at boot when 802.11G was used before.

Changelog 12.11.1:

• Setup mode: Fixed bug that allows disable WiFi AP when none SSID is configured.

Changelog 12.11.0:

• HeaterCooler: Added "mc":N key to enable (N > 0) and setup temperature safe margin in ºC, in addition to 4 new actions that will be executed when target temperature is greater difference than current temperature + deadbands + safe margin:
  • "15": Heater safe up
  • "16": Heater safe down
  • "17": Cooler safe up
  • "18": Cooler safe down
• HeaterCooler: Fixed bug that could cause issues in actions when humidity sensor was used in same service.
• Humidifier: Fixed bug that could cause issues in actions when temperature sensor was used in same service.
• ESP8266:
  • Improved Installers speed.
  • Removed some debug info from SDK to save some flash storage.
  • Some stability improvements.

Read Wiki for more info.

Changelog 12.11.3:

• HomeKit: Fixed TLV format bug when processing TLV NULL value that causes a memory overflow.

Changelog 12.11.2:

• Setup mode: Fixed bug that disables WiFi AP without user request.
• HomeKit: Added several DRAM guards.
• HomeKit: Fixed TLV parse bug when processing TLV NULL value that causes a system crash.
• HomeKit: Fixed bug on storage when compacting data.
• ESP8266:
  • WiFi: Fixed bug that avoid to set PHY mode to 802.11N at boot when 802.11G was used before.

Changelog 12.11.1:

• Setup mode: Fixed bug that allows disable WiFi AP when none SSID is configured.

Changelog 12.11.0:

• HeaterCooler: Added "mc":N key to enable (N > 0) and setup temperature safe margin in ºC, in addition to 4 new actions that will be executed when target temperature is greater difference than current temperature + deadbands + safe margin:
  • "15": Heater safe up
  • "16": Heater safe down
  • "17": Cooler safe up
  • "18": Cooler safe down
• HeaterCooler: Fixed bug that could cause issues in actions when humidity sensor was used in same service.
• Humidifier: Fixed bug that could cause issues in actions when temperature sensor was used in same service.
• ESP8266:
  • Improved Installers speed.
  • Removed some debug info from SDK to save some flash storage.
  • Some stability improvements.

Read Wiki for more info.

Changelog 12.11.2:

• Setup mode: Fixed bug that disables WiFi AP without user request.
• HomeKit: Added several DRAM guards.
• HomeKit: Fixed TLV parse bug when processing TLV NULL value that causes a system crash.
• HomeKit: Fixed bug on storage when compacting data.
• ESP8266:
  • WiFi: Fixed bug that avoid to set PHY mode to 802.11N at boot when 802.11G was used before.

Changelog 12.11.1:

• Setup mode: Fixed bug that allows disable WiFi AP when none SSID is configured.

Changelog 12.11.0:

• HeaterCooler: Added "mc":N key to enable (N > 0) and setup temperature safe margin in ºC, in addition to 4 new actions that will be executed when target temperature is greater difference than current temperature + deadbands + safe margin:
  • "15": Heater safe up
  • "16": Heater safe down
  • "17": Cooler safe up
  • "18": Cooler safe down
• HeaterCooler: Fixed bug that could cause issues in actions when humidity sensor was used in same service.
• Humidifier: Fixed bug that could cause issues in actions when temperature sensor was used in same service.
• ESP8266:
  • Improved Installers speed.
  • Removed some debug info from SDK to save some flash storage.
  • Some stability improvements.

Read Wiki for more info.

Changelog 12.11.1:

• Setup mode: Fixed bug that allows disable WiFi AP when none SSID is configured.

Changelog 12.11.0:

• HeaterCooler: Added "mc":N key to enable (N > 0) and setup temperature safe margin in ºC, in addition to 4 new actions that will be executed when target temperature is greater difference than current temperature + deadbands + safe margin:
  • "15": Heater safe up
  • "16": Heater safe down
  • "17": Cooler safe up
  • "18": Cooler safe down
• HeaterCooler: Fixed bug that could cause issues in actions when humidity sensor was used in same service.
• Humidifier: Fixed bug that could cause issues in actions when temperature sensor was used in same service.
• ESP8266:
  • Improved Installers speed.
  • Removed some debug info from SDK to save some flash storage.
  • Some stability improvements.

Read Wiki for more info.

Changelog 12.11.0:

• HeaterCooler: Added "mc":N key to enable (N > 0) and setup temperature safe margin in ºC, in addition to 4 new actions that will be executed when target temperature is greater difference than current temperature + deadbands + safe margin:
  • "15": Heater safe up
  • "16": Heater safe down
  • "17": Cooler safe up
  • "18": Cooler safe down
• HeaterCooler: Fixed bug that could cause issues in actions when humidity sensor was used in same service.
• Humidifier: Fixed bug that could cause issues in actions when temperature sensor was used in same service.
• ESP8266:
  • Improved Installers speed.
  • Removed some debug info from SDK to save some flash storage.
  • Some stability improvements.

Read Wiki for more info.