efvicap

efvicap is a packet capture tool for network adapters from Solarflare. It uses the ef_vi API for direct access to DMA memory and can capture traffic intended for applications accelerated with OpenOnload

Usage

usage: efvicap [-i iface] [-w file] [filters...]

  -i iface    Interface to capture packets from
  -w file     Write packets in pcap format to file

Using an empty filter captures all packets (requiers a SolarCapture license).

Example

Print info about all received packets:

$ efvicap -i eth0

Save packets to out.pcap:

$ efvicap -i eth0 -w out.pcap

Pipe packets to tcpdump and print only UDP packets:

$ efvicap -i eth0 -w - | tcpdump -r - udp

Save UDP packets sent to 230.0.0.1:5000 and 230.0.0.2:6000:

$ efvicap -i eth0 -w out.pcap 230.0.0.1:5000 230.0.0.2:6000

Building & Installing

efvicap requires CMake 3.6 or higher to build and install.

Building:

$ cd efvicap
$ mkdir build
$ cd build
$ cmake ..
$ make

Installing:

$ make install

TODO

• Hardware timestamping
• Multiple interfaces
• Separate thread for writing to disk
• Compression

About

This project was created by Erik Rigtorp <[email protected]>.