🪟 edgy.nvim

A Neovim plugin to easily create and manage predefined window layouts, bringing a new edge to your workflow.

✨ Features

• 🔄 Automatically move windows (including floating windows) in a pre-defined layout
• 📐 Manage layouts while keeping your main editor splits untouched.
• 🔧 Personalize edgebar window options to fit your style.
• 📌 Pinned views are always shown in the edgebar even when they have no windows.
• ⌨️ Make navigation easier with personalized buffer-local keymaps for edgebar windows.
• 🎆 Pretty animations (works well with mini.animate)
• 🧩 Works with any plugin. Check Show and Tell for snippets to integrate even better with plugins like neo-tree.nvim, bufferline.nvim

⚠️ Limitations

• fully collapsing windows only works with the global statusline.
• edgebar windows can not be resized like normal windows. It's tricky to detect if a window was resized by the user or by a plugin. Check the config section about keys. Regular window keymaps have been added for resizing windows.
• requires Neovim >= 0.9.2 or Neovim >= 0.10.0 (after June 5, 2023) for proper folding. If you're on an older nightly, you can set fix_win_height to true to make it work.
• some flickering may occur when windows are being moved in their correct position. Should be minimal, but may be more visible for some plugins that don't set the buffer filetype during the frame where the window was created.

📦 Installation

Install the plugin with your preferred package manager:

lazy.nvim:

{
  "folke/edgy.nvim",
  event = "VeryLazy",
  opts = {}
}

If you're not using lazy.nvim, make sure to call require("edgy").setup(opts?).

Recommended Neovim options:

-- views can only be fully collapsed with the global statusline
vim.opt.laststatus = 3
-- Default splitting will cause your main splits to jump when opening an edgebar.
-- To prevent this, set `splitkeep` to either `screen` or `topline`.
vim.opt.splitkeep = "screen"

⚙️ Configuration

edgy.nvim comes with the following defaults:

{
  left = {}, ---@type (Edgy.View.Opts|string)[]
  bottom = {}, ---@type (Edgy.View.Opts|string)[]
  right = {}, ---@type (Edgy.View.Opts|string)[]
  top = {}, ---@type (Edgy.View.Opts|string)[]

  ---@type table<Edgy.Pos, {size:integer | fun():integer, wo?:vim.wo}>
  options = {
    left = { size = 30 },
    bottom = { size = 10 },
    right = { size = 30 },
    top = { size = 10 },
  },
  -- edgebar animations
  animate = {
    enabled = true,
    fps = 100, -- frames per second
    cps = 120, -- cells per second
    on_begin = function()
      vim.g.minianimate_disable = true
    end,
    on_end = function()
      vim.g.minianimate_disable = false
    end,
    -- Spinner for pinned views that are loading.
    -- if you have noice.nvim installed, you can use any spinner from it, like:
    -- spinner = require("noice.util.spinners").spinners.circleFull,
    spinner = {
      frames = { "⠋", "⠙", "⠹", "⠸", "⠼", "⠴", "⠦", "⠧", "⠇", "⠏" },
      interval = 80,
    },
  },
  -- enable this to exit Neovim when only edgy windows are left
  exit_when_last = false,
  -- close edgy when all windows are hidden instead of opening one of them
  -- disable to always keep at least one edgy split visible in each open section
  close_when_all_hidden = true,
  -- global window options for edgebar windows
  ---@type vim.wo
  wo = {
    -- Setting to `true`, will add an edgy winbar.
    -- Setting to `false`, won't set any winbar.
    -- Setting to a string, will set the winbar to that string.
    winbar = true,
    winfixwidth = true,
    winfixheight = false,
    winhighlight = "WinBar:EdgyWinBar,Normal:EdgyNormal",
    spell = false,
    signcolumn = "no",
  },
  -- buffer-local keymaps to be added to edgebar buffers.
  -- Existing buffer-local keymaps will never be overridden.
  -- Set to false to disable a builtin.
  ---@type table<string, fun(win:Edgy.Window)|false>
  keys = {
    -- close window
    ["q"] = function(win)
      win:close()
    end,
    -- hide window
    ["<c-q>"] = function(win)
      win:hide()
    end,
    -- close sidebar
    ["Q"] = function(win)
      win.view.edgebar:close()
    end,
    -- next open window
    ["]w"] = function(win)
      win:next({ visible = true, focus = true })
    end,
    -- previous open window
    ["[w"] = function(win)
      win:prev({ visible = true, focus = true })
    end,
    -- next loaded window
    ["]W"] = function(win)
      win:next({ pinned = false, focus = true })
    end,
    -- prev loaded window
    ["[W"] = function(win)
      win:prev({ pinned = false, focus = true })
    end,
    -- increase width
    ["<c-w>>"] = function(win)
      win:resize("width", 2)
    end,
    -- decrease width
    ["<c-w><lt>"] = function(win)
      win:resize("width", -2)
    end,
    -- increase height
    ["<c-w>+"] = function(win)
      win:resize("height", 2)
    end,
    -- decrease height
    ["<c-w>-"] = function(win)
      win:resize("height", -2)
    end,
    -- reset all custom sizing
    ["<c-w>="] = function(win)
      win.view.edgebar:equalize()
    end,
  },
  icons = {
    closed = " ",
    open = " ",
  },
  -- enable this on Neovim <= 0.10.0 to properly fold edgebar windows.
  -- Not needed on a nightly build >= June 5, 2023.
  fix_win_height = vim.fn.has("nvim-0.10.0") == 0,
}

👁️ Edgy.View.Opts

🚀 Usage

Just open windows/buffers as you normally do, but now they will be displayed in your layout.

⌨️ Keymaps for Edgebar Windows

🔌 API

• require("edgy").select(pos?, filter?) select a window with vim.ui.select in the given position or in all edgebars using an optional filter
• require("edgy").close(pos?) close all edgebars or a edgebar in the given position
• require("edgy").open(pos?) open all pinned views in the given position
• require("edgy").toggle(pos?) toggle all pinned views in the given position
• require("edgy").goto_main() move the cursor to the last focused main window
• require("edgy").get_win(window?) get the Edgy.Window object for the given window or the current window

🪟 Example Setup

{
  "folke/edgy.nvim",
  event = "VeryLazy",
  init = function()
    vim.opt.laststatus = 3
    vim.opt.splitkeep = "screen"
  end,
  opts = {
    bottom = {
      -- toggleterm / lazyterm at the bottom with a height of 40% of the screen
      {
        ft = "toggleterm",
        size = { height = 0.4 },
        -- exclude floating windows
        filter = function(buf, win)
          return vim.api.nvim_win_get_config(win).relative == ""
        end,
      },
      {
        ft = "lazyterm",
        title = "LazyTerm",
        size = { height = 0.4 },
        filter = function(buf)
          return not vim.b[buf].lazyterm_cmd
        end,
      },
      "Trouble",
      { ft = "qf", title = "QuickFix" },
      {
        ft = "help",
        size = { height = 20 },
        -- only show help buffers
        filter = function(buf)
          return vim.bo[buf].buftype == "help"
        end,
      },
      { ft = "spectre_panel", size = { height = 0.4 } },
    },
    left = {
      -- Neo-tree filesystem always takes half the screen height
      {
        title = "Neo-Tree",
        ft = "neo-tree",
        filter = function(buf)
          return vim.b[buf].neo_tree_source == "filesystem"
        end,
        size = { height = 0.5 },
      },
      {
        title = "Neo-Tree Git",
        ft = "neo-tree",
        filter = function(buf)
          return vim.b[buf].neo_tree_source == "git_status"
        end,
        pinned = true,
        open = "Neotree position=right git_status",
      },
      {
        title = "Neo-Tree Buffers",
        ft = "neo-tree",
        filter = function(buf)
          return vim.b[buf].neo_tree_source == "buffers"
        end,
        pinned = true,
        open = "Neotree position=top buffers",
      },
      {
        ft = "Outline",
        pinned = true,
        open = "SymbolsOutlineOpen",
      },
      -- any other neo-tree windows
      "neo-tree",
    },
  },
}

🐯 Tips & tricks

• disable edgy for a window/buffer by setting vim.b[buf].edgy_disable or vim.w[win].edgy_disable. You can even set this after the facts. Edgy will then expunge the window from the layout.

• check the Show and Tell section of the github discussions for snippets for better integration with plugins like neo-tree.nvim, bufferline.nvim, ...