Liberate your EasyBox 904 xDSL

Use it with every Provider without MIC (Modem Installation Code)

This is a step by step guide to open your easybox 904 xDSL for the usage with every provider (Telekom, 1&1 etc). This Guide is only supported for the 904 xDSL (the firmware of the 804 is protected by encryption and cannot be modified this easy, the 904 LTE could work). The Guide will also work with almost any vectoring connection.

From here on you have five options:

1. Quick and easy guide, uses the original Vodafone firmware with every ISP. Also available in german
2. OpenWrt for advanced usage, tuning and best performance (SIP is not working).
3. Create your own modified Vodafone firmware image, which works with every ISP.
4. Debrick your EasyBox when it's softbricked (always use this first when brickage occurs)
5. Debrick your EasyBox when it's hardbricked (when the above method doesn't work)

General Tips

Get the complete config:

ccfg_cli showcfg

Read a specific configuration entry:

ccfg_cli get xxx

Thanks to Quallenauge for the work over at his openWrt-fork and the openWrt-forum. Huge portions of this guide were taken from the openwrt forum. Please thank these guys for the affords! Specials thanks to all the issues and feedback I get in this repo, you guys keep me going :)