docker-nginx-certbot

Automatically create and renew website SSL certificates using the Let's Encrypt free certificate authority and its client certbot. Built on top of the official Nginx Docker images (both Debian and Alpine), and uses OpenSSL/LibreSSL to automatically create the Diffie-Hellman parameters used during the initial handshake of some ciphers.

:information_source: The very first time this container is started it might take a long time before it is ready to respond to requests. Read more about this in the Diffie-Hellman parameters section.

:information_source: Please use a specific tag when doing a Docker pull, since :latest might not always be 100% stable.

Noteworthy Features

• Handles multiple server names when requesting certificates (i.e. both example.com and www.example.com).
• Handles wildcard domain request in case you use DNS authentication.
• Can request both RSA and ECDSA certificates (at the same time).
• Will create Diffie-Hellman parameters if they are defined.
• Uses the parent container's /docker-entrypoint.d/ folder.
• Will report correct exit code when stopped/killed/failed.
• You can do a live reload of configs by sending in a SIGHUP signal (no container restart needed).
• Possibility to use this image offline with the help of a local CA.
• Both Debian and Alpine images built for multiple architectures.

Acknowledgments and Thanks

This container requests SSL certificates from Let's Encrypt, with the help of their certbot script, which they provide for the absolutely bargain price of free! If you like what they do, please donate.

This repository was originally forked from @henridwyer by @staticfloat, before it was forked again by me. However, the changes to the code has since become so significant that this has now been detached as its own independent repository (while still retaining all the history). Migration instructions, from @staticfloat's image, can be found here.

Usage

Before You Start

1. This guide expects you to already own a domain which points at the correct IP address, and that you have both port 80 and 443 correctly forwarded if you are behind NAT. Otherwise I recommend DuckDNS as a Dynamic DNS provider, and then either search on how to port forward on your router or maybe find it here.

2. I suggest you read at least the first two sections in the Good to Know documentation, since this will give you some important tips on how to create a basic server config, and how to use the Let's Encrypt staging servers in order to not get rate limited.

3. I don't think it is necessary to mention if you managed to find this repository, but you will need to have Docker installed for this to function.

Available Environment Variables

Required

• CERTBOT_EMAIL: Your e-mail address. Used by Let's Encrypt to contact you in case of security issues.

Optional

• DHPARAM_SIZE: The size of the Diffie-Hellman parameters (default: 2048)
• ELLIPTIC_CURVE: The size/curve of the ECDSA keys (default: secp256r1)
• RENEWAL_INTERVAL: Time interval between certbot's renewal checks (default: 8d)
• RSA_KEY_SIZE: The size of the RSA encryption keys (default: 2048)
• STAGING: Set to 1 to use Let's Encrypt's staging servers (default: 0)
• USE_ECDSA: Set to 0 to have certbot use RSA instead of ECDSA (default: 1)

Advanced

• CERTBOT_AUTHENTICATOR: The authenticator plugin to use when responding to challenges (default: webroot)
• CERTBOT_DNS_PROPAGATION_SECONDS: The number of seconds to wait for the DNS challenge to propagate (default: certbot's default)
• DEBUG: Set to 1 to enable debug messages and use the nginx-debug binary (default: 0)
• USE_LOCAL_CA: Set to 1 to enable the use of a local certificate authority (default: 0)

Volumes

• /etc/letsencrypt: Stores the obtained certificates and the Diffie-Hellman parameters

Run with docker run

Create your own user_conf.d/ folder and place all of you custom server config files in there. When done you can just start the container with the following command (available tags):

docker run -it -p 80:80 -p 443:443 \
           --env [email protected] \
           -v $(pwd)/nginx_secrets:/etc/letsencrypt \
           -v $(pwd)/user_conf.d:/etc/nginx/user_conf.d:ro \
           --name nginx-certbot jonasal/nginx-certbot:latest

You should be able to detach from the container by holding Ctrl and pressing p + q after each other.

As was mentioned in the introduction; the very first time this container is started it might take a long time before before it is ready to respond to requests, please be a little bit patient. If you change any of the config files after the container is ready, you can just send in a SIGHUP to tell the scripts and Nginx to reload everything.

docker kill --signal=HUP <container_name>

Run with docker-compose

An example of a docker-compose.yaml file can be found in the examples/ folder. The default parameters that are found inside the nginx-certbot.env file will be overwritten by any environment variables you set inside the .yaml file.

NOTE: You can use both environment: and env_file: together or only one of them, the only requirement is that CERTBOT_EMAIL is defined somewhere.

Like in the example above, you just need to place your custom server configs inside your user_conf.d/ folder beforehand. Then you start it all with the following command.

docker-compose up

Build It Yourself

This option is for if you make your own Dockerfile. Check out which tags that are available in this document, or on Docker Hub, and then choose how specific you want to be.

In this case it is possible to completely skip the user_conf.d/ folder and just write your files directly into Nginx's conf.d/ folder. This way you can replace the files I have built into the image with your own. However, if you do that please take a moment to understand what they do, and what you need to include in order for certbot to continue working.

FROM jonasal/nginx-certbot:latest
COPY conf.d/* /etc/nginx/conf.d/

Tests

We make use of BATS to test parts of this codebase. The easiest way to run all the tests is to execute the following command in the root of this repository:

docker run -it --rm -v "$(pwd):/workdir" ffurrer/bats:latest ./tests

More Resources

Here is a collection of links to other resources that provide useful information.

• Good to Know
  • A lot of good to know stuff about this image and the features it provides.
• Changelog
  • List of all the tagged versions of this repository, as well as bullet points to what has changed between the releases.
• DockerHub Tags
  • All the tags available from Docker Hub.
• Advanced Usage
  • Information about the more advanced features this image provides.
• Certbot Authenticators
  • Information on the different authenticators that are available in this image.
• Nginx Tips
  • Some interesting tips on how Nginx can be configured.

External Guides

Here is a list of projects that use this image in various creative ways. Take a look and see if one of these helps or inspires you to do something similar:

• A Node.js application served over HTTPS in AWS Elastic Beanstalk
• Host your own Nakama server