Distributed Systems Topics Save

Resources related to distributed systems, system design, microservices, scalability and performance, etc

Project README

System Design Patterns

This repo is work in progress

Topics and resources related to distributed systems, system design, microservices, scalability and performance, etc

Check out my other repositories:

Distributed systems integration

Synchronous communication

Synchronous communication is a type of communication in which the systems involved need to be in contact with each other at the same time in order to exchange messages or information. In synchronous communication, messages are typically transmitted and processed immediately, without any delay.

It is often used in real-time applications, where the parties need to exchange messages or information in a timely manner in order to maintain the integrity or consistency of the system. By using synchronous communication, systems can exchange messages and information in a coordinated and immediate manner, which can improve the reliability.

There are several ways to implement synchronous communication, including using remote procedure calls (RPCs), sockets, or other mechanisms. The choice of approach depends on the specific requirements and constraints of the system, and on the type and amount of data that needs to be exchanged.

In synchronous communication a client depends on an answer. In this form of communication the client sends a request and waits for a response before continuing.

Examples of a synchronous communication are Remote Procedure Calls (RPC) over HTTP, gRPC, Apache Thrift etc. Also RabbitMQ supports RPC pattern.

Synchronous calls can be a good choice for:

  • Communication between your client (like web UI / mobile app) and your backend server (HTTP).
  • Communication with internal shared/common services, like email service or a service to process some data (RPC or HTTP calls).
  • Communication with external third-party services.

Synchronous calls between distributed systems is not always a good idea. It creates coupling, system becomes fragile and slow. For example, in microservices world synchronous communication between microservices can transform them to a distributed monolith. Try to avoid that as much as possible.

Asynchronous communication

Asynchronous communication is a type of communication in which the systems involved do not need to be in contact with each other at the same time in order to exchange messages or information. In asynchronous communication, messages are typically processed at a later time.

It is often used in distributed systems where the parties involved are located in different places, or are operating at different times. By using asynchronous communication, systems can exchange messages without needing to be in contact with each other at the same time, which can improve the flexibility and scalability of the system.

In short, when using async communication, client or message sender doesn't wait for a response. It just sends a message which is stored until the receiver takes it (fire and forget).

There are several ways to implement asynchronous communication, including using message queues, event streams, or other mechanisms. The choice of approach depends on the specific requirements and constraints of the system, and on the type and amount of data that needs to be exchanged.

Examples: message brokers developed on top of AMQP protocol (like RabbitMQ) or event streams like Kafka.

When changes occur, you need some way to reconcile changes across the different systems. One solution is eventual consistency and event-driven communication based on asynchronous messaging.

Ideally, you should try to minimize the communication between the distributed systems. But it is not always possible. In microservices world, prefer asynchronous communication since it is better suited for communication between microservices than synchronous. The goal of each microservice is to be autonomous. If one of the microservices is down that shouldn't affect other microservices. Asynchronous communication via messaging can remove dependencies on the availability of other services. This topic is discussed more in details below in coupling section.

References:

Data serialization

Data serialization is the process of converting structured data into a format that can be easily stored or transmitted. The process of serialization involves translating the data into a specific format, such as a string of characters or bytes, and then deserialized back to the original format when it is needed.

Data serialization is often used in distributed systems where data needs to be transferred between different nodes or components in the system. By serializing the data, it can be transmitted over a network or stored in a file, and then reconstructed at the other end of the transmission. This allows the data to be transferred efficiently and reliably.

To address the issue of multi-language microservices communication, a possible solution is to describe our data models in some language-agnostic way, so we can generate the same models for each language. This requires the use of an IDL, or interface definition language.

One of the most common formats for that lately is JSON. It is simple and human-readable. For most systems out there this format is a great choice.

But when your system is growing, there are better choices.

Protocol buffers, Apache Avro, Apache Thrift provide tools for cross platform and language neutral data formats to serialize data. Those formats are useful for services that communicate over a network or for storing data.

Some pros for using a schema and serializing data include:

  • Messages are serialized to binary format which is compact (binary messages occupy about twice less storage than JSON)
  • Provides interoperability with other languages (language agnostic).
  • Provides forward and backward-compatible schema for your messages/events

References:

API Gateway

Your clients need to communicate to your system somehow. Here is where API Gateway comes in.

An API gateway is a software component that acts as a bridge between an application and the underlying services or resources that the application uses. The API gateway is responsible for routing requests from the application to the appropriate service or resource, and for translating the request and response data as needed to enable communication between the application and the service.

An API gateway is an API management tool that sits between a client and a collection of backend services. An API gateway acts as a reverse proxy to accept all application programming interface (API) calls, aggregate the various services required to fulfill them, and return the appropriate result. Quote from What does an API gateway do?

In many cases, the API gateway is implemented as a layer between the application and the underlying services, and is responsible for routing requests from the application to the appropriate service, and for translating the request and response data as needed. This allows the API gateway to abstract the underlying services from the application, and to provide a consistent and standardized interface for the application to access the services.

You can implement your own API Gateway if needed, or you could use existing solutions like Kong or nginx.

Api Gateway can also handle:

References:

Scalability

Scalability is the capability to handle the increased workload by repeatedly applying a cost-effective strategy for extending a system’s capacity.

Vertical scaling means scaling by adding more power (CPU, RAM, Storage, etc.) to your existing servers.

Horizontal scaling means adding more servers into your pool of resources.

Below are discussed some problems with scalability and patterns to solve those problems.

Performance and availability

Components of distributed systems communicate through a network. Networks are unreliable and slow compared to communication in a single process node. Ensuring good performance and availability in these conditions is an important aspect of a distributed system.

Performance is the amount of useful work accomplished by a computer system at reasonable time.

Availability is often quantified by uptime (or downtime) as a percentage of time the service is available. For example, around 8 hours of downtime per year may be considered as a 99.9% available system.

Below we will discuss some techniques that can help with system performance and availability.

Creating redundancy

Redundancy means duplication of critical components like data, nodes and running processes, etc. Redundancy can improve flexibility, reliability, availability, scalability and performance of your system, failure resistance and recovery. Below we discuss techniques and patterns for creating redundancy.

Autoscaling

Autoscaling is a method used in cloud computing that dynamically adjusts the amount of computational resources in a server based on the load. Autoscaling allows an application to scale up or down automatically, based on pre-defined policies and rules, in order to maintain optimal performance and cost efficiency.

In cloud autoscaling, the application or service is monitored continuously, and the capacity of the underlying cloud infrastructure is automatically adjusted based on the workload and performance of the application. For example, if the workload increases, the autoscaling system can automatically add additional resources, such as servers or processors, in order to handle the increased demand. Conversely, if the workload decreases, the autoscaling system can automatically release or shut down unused resources in order to reduce costs.

References:

Load balancing

High-traffic websites must serve thousands or even millions of concurrent requests to their clients. To scale to these amounts of traffic usually requires adding more servers with multiple instances/nodes of a backend application running.

Load balancing is a technique for distributing workloads or requests across multiple computing resources, such as servers, processors, or network links, in order to improve the performance and availability of a system. In a load-balanced system, requests are distributed evenly across the available resources, in order to balance the load and prevent any individual resource from becoming overwhelmed.

Load balancing can provide several benefits, such as improved performance and scalability, better utilization of resources, and increased availability and reliability. It is often used in distributed systems, such as web applications or networks, where it can help to distribute workloads and requests across multiple resources in order to improve the performance and availability of the system.

There are several approaches to load balancing, including hardware-based load balancers, software-based load balancers, and cloud-based load balancers. The choice of approach depends on the specific requirements and constraints of the system, and on the type and amount of workload that needs to be distributed.

Load balancers can operate at one of the two levels described below.

Transport (Layer 4) load balancing

Layer 4 load balancers operate at the transport level and make their routing decisions based on address information extracted from the first few packets in the TCP stream and do not inspect packet content.

Application (Layer 7) load balancing

Level 7 load balancing deals with the actual content of each message enabling the load balancer to make smarter load balancing decisions, can apply optimizations and changes to the content (such as compression and encryption) and make decisions based on the message content. Layer 7 gives a lot of interesting benefits, but is less performant.

Note: Layers 4 and 7 are a part of OSI Model.

Load balancing can be software and hardware based.

Software Load balancing can be done by an API gateway or a reverse proxy.

There are multiple algorithms for implementing load balancing: round-robin, least connection, hashing based, etc.

References:

Databases

Database can be a bottleneck of the entire application. Below are some patterns that can help scale databases.

Indexing

Database indexing is a technique for organizing and storing data in a database in a way that allows it to be accessed and queried efficiently. A Database index is a data structure that is used to store a subset of the data in a database, and to provide fast access to the data based on the values in one or more columns.

When a query is executed, the database can use the index to quickly locate and retrieve the data that is needed to satisfy the query, without having to scan the entire database. This can improve the performance of the query and make it more efficient.

There are several types of indexes that can be used in a database, including primary indexes, secondary indexes, clustered indexes, and non-clustered indexes. The choice of index type depends on the data in the database and the type of queries that are being executed.

Creating indexes is one of the first things you should consider when you need to improve database read performance. To be able to create effective indexes, here are a few important things to consider:

  • You need to know what index data structure works best for your particular use case. Most common index data structure is a B-Tree, it works well for most cases. But in some cases (like full text search, regex patterns like %text%) you may need something else, like GIN (Generalized Inverted Index) or Trigram Matching.
  • Your query may need a full index, but in some cases a partial index can be a better choice
  • When creating an index, an order of columns in an index may play a big role on how this index is going to perform. It is even possible to make query slower by creating a suboptimal index.
  • While indexes can improve read performance, they slow down write performance since every time you insert something into a database each index has to be updated too. Create only minimum amount of indices that you will actually use, and remove all unused ones.

Indexing is a complex topic. Creating effective indexes requires deep understanding of how they work internally. Check out the references below for more in-depth guides.

References:

Replication

Data replication is when the same data is intentionally stored in more than one node.

Database replication is a technique for copying data from one database to another, in order to provide multiple copies of the data for fault tolerance, scalability, or performance. Database replication can be used to create a redundant copy of a database, or to distribute a database across multiple nodes or locations.

In database replication, data is copied from a source database to one or more target databases. The source and target databases can be located on the same server, or on different servers. The data can be copied asynchronously, which means that the source and target databases can operate independently of each other, and the data is copied in the background without interrupting the operation of the databases.

Database replication can provide several benefits, such as improved availability and fault tolerance, better performance and scalability, and easier data management and maintenance.

References:

Partitioning

Database partitioning is a technique for dividing a database into smaller, independent parts, called partitions. The goal of partitioning is to improve the performance and scalability of the database by allowing data to be distributed across multiple partitions, and by allowing each partition to be managed and accessed independently of the others.

When you have large amounts of data that don't fit into one database partitioning is a logical next step to improve scalability.

There are several types of database partitioning, including:

  • Horizontal partitioning: In this type of partitioning, rows of a database table are divided into multiple partitions based on the values in one or more columns. This allows different partitions to be managed and accessed independently of each other, and can improve the performance and scalability of the database.
  • Vertical partitioning: In this type of partitioning, columns of a database table are divided into multiple partitions. This can help to reduce the size of each partition, and can make it easier to manage and access the data in the database.
  • Range partitioning: In this type of partitioning, the rows of a database table are divided into multiple partitions based on the range of values in a specific column. This can be useful for managing data that has a natural range, such as dates or numbers.

Database partitioning is a technique that can improve the performance and scalability of a database by allowing data to be distributed across multiple partitions and managed independently.

References:

Hot, Warm and Cold data

You can think about data as hot, cold or warm.

  • Hot storage is data that is accessed frequently. For example blog posts created in the last couple of days will probably have a lot more attention than old posts.
  • Warm storage is data that is accessed less frequently. For example blog posts that are created more than a week ago, but still get some attention from time to time.
  • Cold storage is data that is rarely accessed. For example blog posts created long time ago that are rarely accessed nowadays.

When deciding what data to store where, it’s important to consider the access patterns. Hot data can be stored in a fast and expensive storage (SSDs), warm data can be stored in a cheaper storage (HDDs), and cold data can be stored on the cheapest storage.

References:

Database Federation

Database Federation allows multiple databases to function as one, abstracting underlying complexity by providing a uniform API that can store or retrieve data from multiple databases using a single query.

For instance, using federated approach you can take data from multiple sources and combine it into a single piece, without your clients even knowing that this data comes from multiple sources.

A simple example can be a functional partitioning, when we split databases by some particular function or domain. For example, imagine we have "users", "wallets" and "transactions" tables. In a federated approach this could be 3 different databases. This can increase performance since load will be split across 3 databases instead of 1.

Pros:

  • Federated databases can be more performant and scalable
  • Easier to store massive volumes of data
  • Single source of truth for your data, meaning there is one place where it is stored using a single schema/format (unlike in denormalized databases)

But it also has its downsides:

  • You'll need to decide manually which database to connect to.
  • Joining data from multiple databases will be much harder.
  • More complexity in code and infrastructure.
  • Consistency is harder to achieve since you lose ACID transactions

References:

Denormalization

Denormalization is the process of trying to improve the read performance of a database by sacrificing some write performance by adding redundant copies of data.

Database denormalization is a technique for optimizing the performance of a database by adding redundant data to it. In a normalized database, data is organized into multiple, interconnected tables, with each table containing a unique set of data. This can improve the integrity and flexibility of the database, but can also result in complex and costly queries.

When denormalizing a database, data is copied or derived from one table and added to another, in order to reduce the number of table joins or other operations that are needed to retrieve the data. This can improve the performance of the database by reducing the amount of work that the database engine needs to do to satisfy a query, and can also reduce the amount of data that needs to be transmitted between the database engine and the application.

Database denormalization is often used in data warehousing and business intelligence applications, where complex and costly queries are common. It can also be used in other types of databases, such as operational databases, where the performance of the database is critical.

For example, instead of having separate "users" and "wallets" tables that must be joined, you put them in a single document that doesn't need any joins. This way querying database will be faster, and scaling this database into multiple partitions will be easier since there is no need to join anymore.

Pros:

  • Reads are faster since there are fewer joins (or none at all)
  • Since there is no joins it is easier to partition and scale
  • Queries can be simpler to write

Cons:

  • Writes (inserts and updates) are more expensive
  • More redundancy requires more storage
  • Data can be inconsistent. Since we have multiple copies of the same data, some of those copies may be outdated (or in some cases never updated at all, which is dangerous and must be handled by ensuring eventual consistency)

References:

Materialized views

Materialized view is a pre-computed data set derived from a query specification and stored for later use.

Materialized view can be just a result of a SELECT statement:

CREATE MATERIALIZED VIEW my_view AS SELECT * FROM some_table;

Result of this SELECT statement will be stored as a view so every time you query for it there is no need to compute the result again.

Materialized views can improve performance, but data may be outdated since refreshing a view can be an expensive operation that is only done periodically (for example once a day). This is great for some things like daily statistics, but not good enough for real time systems.

References:

Multitenancy

Multitenant architecture is a design pattern for software applications that allows a single instance of the application to serve multiple tenants, or groups of users. In a multitenant architecture, the application is designed to isolate the data and resources of each tenant, so that each tenant can access and use the application independently of other tenants.

Multitenant architecture is often used in software as a service (SaaS) applications, where the application is provided to multiple tenants on a subscription basis. In this type of architecture, the application is designed to support multiple tenants, each with their own data and resources, and to provide each tenant with access to a specific instance of the application. This allows the application to be used by multiple tenants concurrently, without requiring each tenant to have their own separate instance of the application.

There are multiple tenancy models for databases:

  • Single federated database for all tenants
  • One database per tenant
  • Sharded multi-tenant database
  • And others

Which model to choose depends on a scale of your application.

References:

SQL vs NoSQL

SQL, or relational, databases are good for structured data.

SQL databases are great for transaction-oriented systems that need strong consistency because SQL Databases are ACID compliant.

Relational databases can be very efficient at accessing well structured data, as it is placed in predictable memory locations.

Relational databases are usually scaled vertically. Because in relational databases data is structured and can have connections between tables it is harder to partition / scale horizontally.

Relational databases are a better choice as a main database for most projects, especially new ones, and can be good enough up to a few millions of active users, depending on a use case.

SQL databases include: MySQL, PostgreSQL, Microsoft SQL server, Oracle, MariaDB and many more. Cloud providers like AWS, GCP and Azure include their own relational database solutions.

NoSQL is a good choice for unstructured/non-relational data. Because unstructured data is usually self-contained and consists of independent objects with no relations, it is easier to shard/partition, thus it is easier to scale horizontally.

NoSQL / Non-Relational databases can be a good choice for large scale projects with more than few millions of active users (especially when you need to do sharding, because NoSQL with it's denormalized data is easier to shard), but since NoSQL databases lack ACID properties (NoSQL are usually eventually consistent) and relational structures, they are not the best choice as a main database for most projects, especially on a low scale.

Also, contrary to popular claims that NoSQL is faster, it's not always the case. In fact, for most of the typical query needs relational databases can be much faster (as described by this research: Performance benchmark: PostgreSQL/MongoDB), but ultimately everything depends on your query patterns.

NoSQL databases include: MongoDB, Cassandra, Redis and many more. Cloud providers like AWS, GCP and Azure include their own non-relational database solutions.

References:

Identifiers

Identifiers (or primary keys) uniquely identify rows of data in tables, and make it easy to fetch data. It's important to know what options you have beyond serial integers and UUID v4, since on top of being unique (or globally unique GUIDs in big apps) your IDs can include encoded timestamp and/or other important metadata that can be used for efficient sorting, better indexing locality, and other things. There are plenty of ID formats lately, like UUIDv7, Snowflake, ULID, etc. and it's important to know which one is best to use for your database models (and also event IDs, especially when using Event Sourcing).

Connection pooling

Opening and maintaining a database connection for each client is expensive (establishing TCP connection, process creation, etc.).

Connection pool is a cache of database connections maintained so that the connections can be reused when future requests to the database are required. After a connection is created, it is placed in the pool and reused again so that a new connection does not have to be established.

This can significantly improve performance when large amount of clients are connecting to the database at once.

For example, if you are using PostgreSQL, popular solutions include pgbouncer and pgcat. Though keep in mind that adding those technologies can come at a cost, more info here: PgBouncer is useful, important, and fraught with peril.

Caching

Caching is a technique for storing frequently accessed data in a temporary storage area, known as a cache, in order to improve the performance and scalability of a system. When data is accessed from a cache, it is typically accessed more quickly than if it were retrieved from its original location, such as a database or a file system. This can improve the performance of the system and reduce the load on its underlying data storage.

Caching is often used in web applications and other systems that need to retrieve data quickly and efficiently. For example, a web application might use a cache to store the results of common database queries, or to store the results of computationally expensive operations. This can improve the performance of the web application by allowing it to retrieve data more quickly, and can reduce the load on its underlying data storage.

For caching, you can use tools like Redis, Memcached, or other key-value stores.

Caching strategies

There are several caching strategies worth knowing. Most common are:

  • Cache-aside (lazy loading)
  • Write-through
  • Write-behind
  • Refresh-ahead

References:

Distributed caches

A distributed cache is a system for storing and managing data in a distributed environment. It is a type of cache, which is a temporary storage area for frequently accessed data, that is designed to work in a distributed system, where multiple nodes or servers are used to store and manage data.

Distributed caches are used to improve the performance and scalability of distributed systems by storing data in a way that allows it to be accessed and updated quickly and efficiently. They typically use a distributed hash table (DHT) to store data across multiple nodes or servers, and to map keys to the locations of their corresponding data. This allows data to be accessed and updated in a distributed manner, and can improve the performance and scalability of the system.

References:

CDNs

Content delivery network is geographically distributed group of servers which work together to provide fast delivery of Internet content.

CDNs work by storing copies of content at multiple locations around the world, and by routing users requests to the nearest location that has a copy of the requested content. This can reduce the distance that data has to travel, and can improve the speed and performance of content delivery.

A CDN allows for the quick transfer of assets needed for loading Internet content including HTML pages, javascript files, stylesheets, images, and videos.

CDN can increase content availability, redundancy, improve website load times.

References:

Coupling

One reason why distributed systems are so hard to design is coupling. One of the ways you can scale your system is by reducing it. Below are some topics and techniques that can help prevent coupling.

Location coupling

When a program assumes that something is available at a known location, we can call that a Location coupling. For example, when one service knows the location of another service (lets say knows its URL).

It is difficult to horizontally scale location coupled systems. Location can change, or there may be multiple locations if there are multiple nodes running. Also systems can assume that accessing those locations may be fast, but usually in distributed systems a remote location can be on a entirely different server in a different country, thus a network trip to may be slow.

Location coupling is a problem when considering horizontal scalability because it directly prevents resources from being added dynamically at different locations.

To break location coupling you can abstract the specifics of accessing another part of the system. Your application should be agnostic to the called system.

This can be implemented differently in different scenarios:

  • At the network layer, we can use DNS to mask the specific IP addresses of remote servers
  • Load balancers can hide that there are multiple instances of some particular system are running to service high workloads
  • Clients can hide the details of sharded database clusters
  • When using microservices, you can use message broker (described below).

Abstracting the specifics of accessing another part of the system makes application depend only on that abstraction instead of keeping bunch of locations it needs. This lets application scale better. For example, this lets you dynamically add more services and instances to the network when you need it (during peak hours) without changing anything.

Broker pattern

Broker pattern is used to structure distributed systems with decoupled components. These components can interact with each other by remote service invocations. A broker component is responsible for the coordination of communication among components.

In application that consists of microservices, your services shouldn't know the location of each other. Instead, you can publish your commands/messages/events to a common place (like a message broker) and let other services pick it up. Now all of your services will know about a common location (message broker), but not about each other. Prefer Asynchronous communication when using message brokers.

References:

Temporal coupling

Temporal coupling usually happens in synchronously communicated systems (a part of a system expects all other parts on which it depends to serve its needs instantaneously). If one part fails, all its dependent systems will also fail, creating a chain of failures.

The most common approach to breaking temporal coupling is the use of message queues. Instead of invoking other parts of a system synchronously (calling and waiting for the response), the caller instead puts a request on a queue and the other system consumes this request when it is available.

Message queues

A message queue is a component used for Inter-process communication. In distributed systems typically used for asynchronous service-to-service communication. Messages are stored on the queue until they are processed by a consumer.

Each message should be processed only once by a single consumer (idempotent consumer).

Software examples: RabbitMQ and Kafka.

References:

Business data and logic coupling

To be autonomous, each component of a system must own its domain data and logic (this is called data ownership).

Try not to share business data between components. Otherwise you may end up with a distributed monolith where every change can impact and break the whole system. This is especially relevant in microservices world.

Regardless of the method we use to share data across service boundaries we’ll end up with services that are not autonomous. Autonomous services can evolve independently from each other, non-autonomous ones cannot. They are coupled, they won’t be able to evolve without breaking each other, causing evolution to stop or causing friction at development time, deployment time, and run time.

As soon as we allow cross-service data sharing, for example by allowing services to request data from another service, we end up with the worst of two worlds: a monolith suddenly turns into a distributed monolith with all distributed system problems on top of a monolithic one.

Exception to this rule:

  • Sharing IDs. For example an "order" microservice may need to know what user made an order. In this case you can save a user ID in both services, but not the entire user object with all its properties.
  • Some data, lets say email address, can be needed in multiple services, for example authentication service (to login your user) and a marketing service (to send marketing emails). In those cases you may need to duplicate emails between those services. Duplication is better than calling one service from another, but keep in mind that when updating email you'll need to guarantee tis update in both services. We discuss this further in a section below.

Your components must be independently deployable. In a microservices world, if deploying one microservice you have to change other microservices this means you have a tightly coupled architecture.

Shared-nothing architecture

Shared-Nothing Architecture is a distributed computing architecture that consists of multiple separated nodes that don’t share resources.

This architecture reduces coupling, scales better, simplifies upgrades preventing downtime, eliminates single points of failure, allowing the overall system to continue operating despite failures in individual nodes, etc.

References:

Selective data replication

Selective data replication is creating a copy of the data needed from other remote system (external API, microservice, etc.) into the database of our system, essentially creating a cache of that data that is always available.

You can subscribe to the events that indicate data updates from other services, for example, subscribe to ProductPriceUpdatedEvent and update your local cache when the price changes. Alternatively, if events are not available, you can query an external service periodically to update your cache.

This approach reduces coupling, runtime dependency, improve latency and makes system more scalable and reliable. Even if external source of data is inaccessible, you still have this data replicated in your own database. But keep in mind that cached data can be stale.

References:

Event-driven architecture

Event-driven architecture is a design pattern for software applications that emphasizes the production, detection, and consumption of events as a core mechanism for communication and coordination. In an event-driven architecture, events are used to represent significant changes or actions that occur within the system, and are used to trigger functions or processes that react to those events.

In an event-driven architecture, events are typically represented as messages or notifications that are sent by one component of the system to another. These messages can be sent asynchronously, allowing the components of the system to operate independently and in parallel. When a component receives an event message, it can trigger a response or action, such as updating its internal state, performing an operation, or sending another event message.

An event is a broadcast by a software system about something which has happened within its boundary. For example, when the system successfully create an order, it can publish an ORDER_CREATED event.

Event-driven architecture is a flexible and scalable approach to building software applications, and can enable applications to respond quickly and efficiently to changes or actions within the system. It is often used in distributed systems, microservices architectures, and real-time applications, where it can provide a powerful and efficient mechanism for communication and coordination.

References:

Event-driven end-to-end

In typical web pages, when you load a page and data on the server changes afterwards, the browser does not know about this change until you reload the page. The state displayed on a page is stale cache that is not updated until you explicitly poll or query for changes.

More recent protocols have moved beyond simple request/response pattern. WebSockets provide communication channels which allow your browser to establish a TCP connection to your server. Your server can push messages to your browser as long as it remains connected. This provides an ability for the server to actively inform end-users about any state changes on the server.

Recent tools for developing client applications, like React, Redux, Flux etc. already manage client-side state by subscribing to a stream of changes that represent responses from a server. It would be very natural to extend this model to also allow server to push state-changing events to a client. This way changes and events could flow end-to-end, from the interaction of one device that triggers an event, to the server and event bus, to processing this event, storing it in a database, and back to the UI client that is observing the state changes on another device.

The idea of subscribing for changes instead of querying opens a bunch of new possibilities for more responsive user interfaces. It is already used in some places, like online games or messaging apps.

For typical data centric or CRUD services there may be not a lot of benefit designing an entire application using this approach, but some parts of your application can definitely benefit from it.

References:

Designing around dataflow

Some microservices example:

  • In regular approach, when purchasing a product, your microservice can query an exchange rate service to get currency exchange rate.
  • In a dataflow approach, the code that processes purchases would subscribe to a stream of exchange rate updates ahead of time and record the current rate in a local database whenever it changes. When processing a purchase it only needs to query its local database (Selective data replication).

Same as changing a single number in a spreadsheet column will change the output of a formula that depends on this value.

Subscribing to a stream of changes, rather than querying the current state when needed, brings up closer to a spredsheet-like model of computation: when some piece of data changes, any derived data that depends on it can swiftly be updated. - Martin Kleppman

By combining techniques like Event-driven Architecture and Selective Data Replication we can achieve interesting results.

References:

Consistency

Distributed systems are made up of parts which interact relatively slowly and unreliably. Asynchronous networks can duplicate data, drop packets, reorder messages, have delays, etc. Data can be spread across multiple data stores so managing and maintaining consistency in this environment is an important aspect of the system.

  • Weak consistency - After a write, there is no guarantee that reads will see it. Works well in real time use cases such as voice or video chat, and realtime multiplayer games, etc.
  • Strong consistency - After a write, there is a guarantee that reads will se it. Data is replicated synchronously, usually using some kind of transaction.
  • Eventual consistency - After a write, readers will eventually see written data (usually within seconds) and data is replicated asynchronously. Eventual consistency works best for distributed systems at a large scale.

Familiarize with Fallacies of distributed computing before implementing any kind of distributed system. Added complexities may not be worth it.

Below we will discuss where and why we need consistency, how to achieve it and some associated problems.

References:

Different views on data

Sometimes there is no single piece of software that satisfies all your requirements. One database may not be enough for all your needs. Application wants to view data as OLTP, analytics team want to view it as OLAP. With high loads, you may also need to give users an ability to access data very fast using cache or full-text search. There also may be benefit in creating connections between different data using a graph database.

Typically you may need to use:

When there is no single storage solution that satisfies all your needs, you may end up composing your services out of multiple software solutions that work together tied by your code. Same data may end up in multiple different storages to satisfy everyone's needs while querying, thus creating a lot of redundancy and data duplication, but providing performance benefits and ability to analyze and query data from different perspectives.

Keeping writes to several storage systems in sync is necessary. Just writing to multiple databases without any additional layer that ensures consistency is a naive approach that can lead to dual-write problems and inconsistencies. We will discuss techniques and patterns that can help reliably replicate data to multiple storages in the next sections.

References:

Distributed transactions

Another reason why distributed systems are hard is consistency problems.

In a typical non-distributed application, you can use database transactions to achieve strong consistency pretty easily. But in a distributed world, when databases can be on a different servers, simple transactions won't work anymore so we need to find workarounds. And with those workarounds we usually can only achieve weak or eventual consistency, because strong consistency usually means low performance and coupling, which is unacceptable when you distribute.

Two-phase commit (2PC)

Two-phase commit (2PC) is one of the ways how to achieve strong consistency in a distributed world. Using 2PC, each server participating in a transaction starts a local transaction, and they all commit only when other participants finish executing the transaction.

2PC can guarantee strong consistency, but it is rarely used because:

  • It is blocking. If the coordinator fails permanently, some participants will never resolve their transactions
  • It is slow and affects performance of participating systems
  • It creates coupling between systems

References:

Sagas

In modern distributed systems, eventual consistency is preferred because it scales better. But how do we achieve it?

One of the patterns for this is Sagas.

The saga pattern is a design pattern for managing transactions and long-running processes in distributed systems. In a distributed system, a transaction or long-running process may involve multiple services or components, and may require coordination and communication between those services or components in order to complete successfully. The saga pattern provides a way to manage these transactions or processes in a consistent and reliable manner.

In the saga pattern, a transaction or long-running process is represented as a series of independent steps, called sagas. Each saga is a separate unit of work that can be executed independently of the others, and can be rolled back or compensated if necessary.

A saga is a sequence of local transactions, but unlike 2PC, each transaction commits immediately, without waiting for other participants to finish. This way, all transactions will be committed asynchronously(eventually). Each participant must have a compensating mechanism to revert a saga, so if one of the participants fails, saga should start a revert process to undo all the changes.

References:

Orchestration

When using orchestration approach, sagas are coordinated and managed by a saga manager, or orchestrator, which is responsible for ensuring that the sagas are executed in the correct order and that any errors or exceptions are handled properly.

Orchestration is a centralized approach. Parts of the system that are participating in a workflow are controlled by a single entity called Orchestrator, which is responsible for executing each step in a flow and ensuring consistency of the entire operation.

Orchestrated flows are explicit. It works nicely for complex workflows with a lot of steps since it is easy to keep track of an entire flow in one place.

Choreography

Choreography is a decentralized peer-to-peer approach. Unlike orchestration, when using choreography there is no central place that coordinates workflows. Each part of the system is responsible for subscribing to events it needs. This way data just flows through the system from one part of the system to another.

Choreography is flexible, allows a high degree of independence and autonomy. However, it poses a challenge because many business activities require a logical explicit chain of events. In choreography, flow of events is implicit. When you have complex workflows with a lot of steps, it will be hard to track, understand, maintain, monitor and troubleshoot large-scale flow of activities that are happening across the system. One event may trigger another one, then another one, and so on. To track the entire workflow you'll have to go multiple places and search for an event handler for each step. In this case, using an orchestration might be a preferred approach compared to choreography since you will have explicit workflows gathered in one place.

Choreography in some cases may be harder to scale with growing business needs and complexities. Pub/sub model works for simple flows, but has some issues when the complexity grows:

  • Process flows are “embedded” within the code of multiple applications
  • Often there is tight coupling and assumptions around input/output, Service Level Agreements (SLA), event schemas, etc., making it harder to adapt to changing needs.
  • You lose sight of the larger scale flow. It is hard to track steps and overall status of the workflow

To solve some of these problems you could use a workflow engine reading all the events in a flow and check if they can be correlated to a tracking flow.

A lot of systems use both orchestration and choreography depending on the use case, you don't necessarily need to choose just one. Pick the right tools for the job.

References:

Process manager

A Process manager is a software component or system that is responsible for managing and coordinating the execution of processes within an application or system. A process is a unit of work that is performed by the application or system, and a process manager is responsible for managing the execution of processes, including starting, stopping, and monitoring processes, and handling any errors or exceptions that may occur during their execution.

The process manager is an important component of many applications and systems, and is responsible for ensuring that processes are executed in a coordinated and efficient manner. It can provide several benefits, such as improved performance, reliability, and scalability, and can also make it easier to manage and maintain the application or system.

In many cases, the process manager is implemented as a separate component that is responsible for managing the execution of processes within the application or system. It may interact with other components, such as a message queue or a database, in order to coordinate the execution of processes and to store and retrieve data as needed.

Process manager is used to maintain the state of the sequence and determine the next processing step based on intermediate results.

Process manager is very similar to Orchestrator. In fact, a lot of people use the terms like "Saga" and "Orchestration" when in reality they are talking about the process manager.

Process managers are state machines that store some state, while sagas usually don't have a state and operate only on data that they receive in events.

Workflow Engines

Workflow engines are workflow management systems that facilitate orchestration of microservices or data flows (like ETL). They provide APIs to define a set of tasks that need to be executed and gives tooling that can help visualize flows (as diagrams and/or Directed acyclic graph) and handle workflow monitoring, logging, retries, handling failures, scheduling, etc.

Workflow engines:

  • Temporal - open source workflow engine
  • Apache Airflow - is a platform created by AirBnb to programmatically author, schedule, and monitor workflows.
  • Google cloud workflows - easily build reliable applications, process automation, data and machine learning pipelines on Google Cloud.
  • Camunda - The Universal Process Orchestrator
  • Prefect - Python based. Build, run, and monitor data pipelines at scale
  • Conductor - Workflow Orchestration engine created by Netflix that runs in the cloud.

You can build Business Process Model and Notation (BPMN) diagrams for your workflows using tooling provided by https://bpmn.io/

References:

Dual writes problem

A dual write describes the situation when you change data in 2 systems, e.g., a database and Apache Kafka, without an additional layer that ensures data consistency over both services.

For example:

await database.save(user);
await eventBus.publish(userCreatedEvent);

Something can happen in between those operations (a network lag, process restart, event broker crash, etc.) so the second operation can fail resulting in a loss of data. This problem is called "dual writes problem". Dual writes are unsafe and can lead to data inconsistencies. This scenario can happen if you have multiple asynchronous operations executing one by one in a single place, so you should design your system to execute only one such operation at a time, or have some process that guarantees consistency.

There are multiple techniques to avoid dual writes, like Outbox Pattern and Retrying failed steps. We describe them in details below.

References:

The Outbox Pattern

Subscribing to an event from a different part of the system and creating your own view of that event (saving it to the database in a way that your system needs) is one of the ways we introduce redundancy. But saving some data and publishing an event that notifies other parts of the system about what happened can face dual write problems.

The Outbox Pattern can help with consistency when writing data to a database and publishing an event to a message broker.

What you have to do is save your message/event as a part of database transaction, together with a result of an operation that is being executed. For example, if you are creating a user and sending an event that notifies other services that a user was created, you should save a user object and a message that you want to publish in a single database transaction. User goes to a "user" table and a message goes to an "outbox" or "messages" table. After that a separate Message Relay process publishes the events inserted into database to a message broker. You can use tools like Debezium that publish changes from your "outbox" table to kafka, or create a custom process that checks database every X seconds and sends pending events.

This way we can be sure that no message/event is lost and will be published eventually, even if a message broker is down or a network is lagging. This will guarantee consistency of your data across multiple services and reliability of your application overall.

Note: when using Event Sourcing you may not need an Outbox Pattern since all the changes are stored as events anyway.

References:

Retrying failed steps

Another way to prevent dual write problems is by retrying. For example, create a job that makes sure data is eventually consistent in a case of failure.

Consider this example: you need to save some data in your local database and index it in an external API

await database.save(movie);
await externalAPI.index(movie);

What if your application crashes in the middle of this operation, or if external API is unavailable? Data will be saved to a local database, but not indexed in an external API.

One of the ways to solve this is to have a periodic job that queries the database every X minutes and retries indexing data that was not indexed.

One important detail: when retrying make sure your consumers are idempotent.

Idempotent consumer

Messages, Commands and Events can be delivered twice (or multiple times), for example, when consuming an event from a message broker, an acknowledgement can fail for some reason or event is retried due to a timeout. It is important to process those events only once, otherwise your data may end up corrupted or some unwanted actions can occur in the system (for example you could change your user's credit card twice, or send the same email multiple times etc). We need some mechanism for event de-duplication.

To prevent processing events twice you should make your event consumers idempotent.

Some actions are by definition idempotent. For example, updating a username twice with the same name will end up in the same result. But some actions are not idempotent, like charging money from a wallet.

One of the most used ways to make consumers idempotent is saving some kind of idempotency token (uuid generated by a user, or an ID of the event) in the database, in the same atomic transaction used to save changes caused by this event and set a unique constraint on that id. This way, even if an event/message is received multiple times, it will be processed only once.

You can go even further and prevent idempotency and duplication issues from end to end, starting from your application's clients. You can generate an idempotency token (like UUID/GUID) on a client side (lets say on a web page), send it together with a request and propagate it through your entire system. This way even if a client sends a request twice by accident (for example by refreshing a web page with filled-in form) the operation will be executed only once (if you have an Idempotent consumer).

References:

Change Data Capture

Change data capture (CDC) is a pattern that tracks changes to data in a database in real-time allowing to process it continuously as new database events occur.

CDC is one of the techniques that can help with data consistency when you deal with multiple storage systems.

In a typical database, when you save something, data is first appended to a commit log (also called change log, write ahead log or transaction log) based on a log data structure. This commit log is a source of truth, and tables are merely views of the commit log.

We can utilize that log to duplicate changes from a main database to other databases consistently. Tools like debezium allow publishing database changes to your event bus (like Kafka), and consumers of those events can insert changes to other databases asynchronously.

Why don't we simply save data to multiple databases at once? Because this is not safe and leads to dual-write problems.

When data crosses the boundary between different technologies and processes, using things like CDC, commit log, events bus, and idempotent consumers is a reliable and robust solution to keep data consistent.

References:

Time inconsistencies

If you need to determine an order of some events, the most intuitive way is using timestamps: event that has a lower timestamp should be first, right? Wrong. Clocks are unreliable, especially in distributed systems. Hardware can drift, threads, OS and runtimes can sleep, system can synchronize time using NTP causing time to jump forwards or backwards, current time can be resynchronized between different systems, etc.

Below we will discuss few patterns to deal with that.

Lamport timestamps

Lamport timestamp algorithm is a simple logical clock algorithm used to determine the order of events in a distributed computer system.

It works by assigning a unique sequence number to each event that occurs in the system. When two nodes communicate, they exchange their sequence numbers, and each node updates its own sequence number with the maximum of its current sequence number and the received sequence number. This allows each node to keep track of the relative order of events across the entire system, and to determine whether one event happened before or after another event.

References:

Vector clocks

Vector clock is a data structure used for determining the partial ordering of events in a distributed system and detecting causality violations.

A vector clock is a set of timestamp counters, one for each node in a distributed system. Each node increments its own timestamp counter when it performs an event, and the vector clock is used to record the current timestamp counters at each node.

Vector clocks are used to determine the relative order of events in a distributed system.

References:

Conflict-free replicated data type (CRDT)

Conflict-free replicated data type (CRDT) is a data structure which can be replicated across multiple computers in a network, where the replicas can be updated independently and concurrently without coordination between the replicas, and where it is always mathematically possible to resolve inconsistencies that might come up.

References:

  • crdt.tech
  • Automerge - JavaScript library of data structures based on CRDTs for building collaborative applications

Consensus algorithms

Consensus algorithms are algorithms used to achieve agreement on a single data value among a group of distributed processes or systems. These algorithms are designed to enable a group of nodes to come to an agreement on the state of the system, despite the presence of faulty nodes or network partitions.

Byzantine generals problem

Byzantine generals problem is a problem in computer science and game theory that is used to describe the challenges of achieving consensus in a distributed system in the presence of faulty nodes.

Raft

Raft is a consensus algorithm used in distributed computing (for example, in distributed databases). Raft servers are either leaders or followers. If a leader becomes unavailable, consensus is achieved via leader election by the followers.

References:

Paxos

Paxos algorithm is a distributed consensus algorithm that is used to achieve consensus in a distributed system.

Other topics/patterns

Event Sourcing

Event sourcing is a software design pattern in which the state of an application is represented and stored as a sequence of events. Each event represents a change in the state of the application, and the sequence of events represents the current and past states of the application.

In event sourcing, the application maintains a log or stream of events, which are stored in a durable, append-only data store, such as a database or a file system. Each event in the log is immutable, uniquely identified, and is associated with a specific point in time. The application can reconstruct the current state of the application by replaying the events in the log, from the beginning to the end, in the order in which they occurred.

Event sourcing is often used in applications that need to maintain a high level of reliability, or that need to be able to reconstruct the state of the application from historical data.

References:

CQRS

CQRS (Command Query Responsibility Segregation) is an architectural pattern that separates the responsibilities of querying data from the responsibilities of modifying data. In CQRS, the two responsibilities are handled by separate components or systems, which are designed and optimized independently of each other.

In a CQRS system, the query side is responsible for providing access to data in a read-only manner. It typically exposes a set of APIs or interfaces that allow applications to query the data, but does not allow the data to be modified. The query side is typically optimized for performance and scalability, and may use techniques such as caching or denormalization to improve the performance of queries.

On the other hand, the command side is responsible for modifying the data. It exposes a set of APIs or interfaces that allow applications to submit commands to modify the data, such as creating, updating, or deleting data. The command side is typically optimized for consistency and durability, and may use techniques such as transactions or event sourcing to ensure that the data is modified in a consistent and reliable manner.

CQRS is often used in applications that have complex data-modification requirements, or that need to support high levels of concurrency and scalability. It is a useful technique for separating the responsibilities of querying and modifying data.

Usually when using CQRS we write data to a database that provides fast writing speeds and/or consistency guarantees, and create a copy of that data in a database that is optimized for reads. Commands are forwarded to a Write database, queries are forwarded to a Read database. This can improve read and write performance of your application.

Your application can be separated into commands and queries using CQS pattern, you can read about it and see code examples here: Commands and Queries

CQRS is a great fit when used together with Event Sourcing, but can also be used without it.

References:

Projections

Projections are usually used in Event Sourced systems to create a "view" from a stream of events by reducing those events to a single value (imagine JS reduce function [event1, event2, event3].reduce(...)). This is essentially a left-fold operation in the functional world.

With projections you can create as many views on your data as you want. Projection can be a simple SQL table, a Document in a NoSQL database, a node in a Graph Database, etc. This can satisfy query needs for everyone, since you can't really query much from a stream of events.

Usually you would subscribe to a stream of events and change projection state when any event happens. A naive approach would be to change projection state in the database directly by executing a query for each event, but this will be very slow during replays. To make projections performant during replays consider loading a batch of events and changing state in-memory first using reducer/left-fold operation combined with pure functions and some patterns like identity map, then execute all queries in batches instead of doing it one by one.

References:

Actor Model

The actor model is a computer science concept of concurrent computation that uses "actors" as the fundamental agents of computing (similarly to objects in OOP world). Unlike typical OOP objects, Actors only communicate by messages, so sending input and output is done only through message passing, not method calling. Actors can also create other actors, thus making an actor tree.

Actor model can be a great addition for distributed, concurrent and/or real time systems (like chats).

The most popular implementations of actor model include Erlang programming language and Akka toolkit for Java and Scala

References:

API Federation

The goal of API federation is to expose resources from multiple parts of the system by providing a unified API with common and consistent schema, abstracting and hiding complexities of an underlying system that consist of many parts, services, databases, etc. (similarly to database federation).

API Federation describes set of practices and tools to strategically think about how to deal with complex APIs in organizations that are creating distributed systems (usually microservices).

For example, when we have multiple services that expose some related data:

  • "Customer" service exposes data related to your customer
  • "Orders" service exposes customers orders
  • "Shipping" service exposes shipping status of an order

Customer may want to query his orders together with a shipping status and some other details. Instead of querying all three of those services separately, in federated approach this could be only one request that gets unified internally into one response, making it easier for clients to use your APIs.

Federated APIs can be built using unified HTTP CRUD interfaces, or using GraphQL graphs.

References:

Chaos Engineering

Chaos Engineering is a practice of experimenting on distributed system (usually in production environment) to test its resilience by introducing some chaos: disabling parts of the systems like services and servers, simulating hard drive failures, adding artificial latency, simulating high traffic, etc. to test how the system will behave in these conditions.

Distributed systems are inherently chaotic. Parts of such systems communicate through unreliable networks, which means those interactions can cause unpredictable outcomes. Chaos Engineering helps uncover system's weak spots and find unreliable parts to make them more resilient. The harder it is to disrupt the steady state, the more confidence we have in the behavior of the system.

Here are some tools for Chaos Engineering:

When practicing Chaos Engineering it is important to use monitoring, logging and tracing tools to have proper observability of the system.

Read more:

Distributed tracing

Distributed tracing is a method of observing requests and transactions as they propagate through distributed systems (like microservices). Tracing Tools help pinpoint where failures occur, what causes poor performance, and lets you trace cross-process transactions.

Distributed tracing is a must-have component for organizations that have complex distributed systems and workflows.

  • OpenTelemetry - a collection of tools, APIs, and SDKs to instrument, generate, collect, and export telemetry data (metrics, logs, and traces).

References

Bulkhead pattern

The Bulkhead pattern is a type of application design that is tolerant of failure. In a bulkhead architecture, elements of an application are isolated into pools so that if one fails, the others will continue to function. It’s named after the sectioned partitions (bulkheads) of a ship’s hull. If the hull of a ship is compromised, only the damaged section fills with water, which prevents the ship from sinking.

References:

Local-first software

Local-first software is a term used to describe a class of software applications that prioritize working offline and storing data locally, rather than relying on remote servers and the cloud. This approach emphasizes the importance of data ownership and control, and aims to provide users with more reliable and efficient access to their data.

References:

Consistent Hashing

Consistent hashing is a way of distributing keys across a cluster of nodes in a way that minimizes the number of keys that need to be moved when nodes are added or removed from the cluster. This can improve the performance and scalability of the system, as well as making it more resilient to changes in the number of nodes.

Consistent hashing is often used in distributed databases, distributed file systems, and other distributed systems where data needs to be distributed across multiple nodes. It is also used in caching systems to distribute cache keys across multiple cache servers.

References:

Hash ring

A hash ring, also known as a consistent hashing ring, is a data structure that is used to distribute keys or values across a cluster of nodes in a distributed system. In a hash ring, each node in the cluster is assigned a range of keys or values, based on the node's position on the ring.

The hash ring is constructed using a hash function, which maps the keys or values to specific points on the ring. When a new key or value is added to the system, the hash function is used to determine the position of the key or value on the ring, and the key or value is assigned to the node that is responsible for the range of keys or values that includes the position of the key or value.

Hash rings are often used in distributed systems, such as distributed databases or distributed caches, to distribute keys or values across the nodes in the cluster in a consistent and efficient manner.

References:

Peer-to-peer

In peer-to-peer (P2P), individual components are known as peers. Peers may function both as a client, requesting services from other peers, and as a server, providing services to other peers. A peer may act as a client or as a server or as both, and it can change its role dynamically with time.

Peer-to-peer is used in file-sharing networks (torrents), cryptocurrency-based products like (blockchain, bitcoin), etc.

Gossip protocol

Gossip protocol is a peer-to-peer communication mechanism that allows designing highly efficient distributed communication systems (P2P).

References:

Distributed Hash Table (DHT)

Distributed Hash Table is a distributed system / decentralized data store that provides a lookup service based on key-value pairs similar to hash tables. DHT provides an easy way to find information in a large collection of data because all keys are in a consistent format, and the entire set of keys can be partitioned in a way that allows fast identification on where the key/value pair resides.

References:

Kademlia

Kademlia is a distributed hash table for decentralized peer-to-peer computer networks.

Kademlia provides a way for large amount of computers to self-organize into a network, communicate with other computers on the network, and share resources (like files and blobs).

Kademlia is used by projects like BitTorrent, IPFS, Ethereum, I2P, and others.

References:

Chord

Chord is a protocol and algorithm for a peer-to-peer distributed hash table.

OSI Model

OSI stands for Open Systems Interconnection. The OSI Model is a conceptual model that defines a common basis for network communication standards for the purpose of systems interconnection. OSI Model defines a logical network and describes computer packet transfer by using various layers of protocols.

You need to know basics of OSI model in order to have a better understanding of some problems in distributed computing (for example Layer 4 and 7 load balancing).

It is a 7 layer architecture with each layer having specific functionality to perform:

  1. Physical layer - responsible for the physical connection between the devices
  2. Data-link - responsible for the node-to-node delivery of the message
  3. Network - works for the transmission of data from one host to the other located in different networks
  4. Transport - provides services to the application layer and takes services from the network layer
  5. Session - responsible for the establishment of connection, maintenance of sessions, authentication, ensures security
  6. Presentation - data from the application layer is extracted here and manipulated as per the required format to transmit over the network
  7. Application - this layer is implemented by the network applications

References:

More resources

Books

Articles

Blogs

Websites

Github Repositories

Videos

Open Source Agenda is not affiliated with "Distributed Systems Topics" Project. README Source: Sairyss/system-design-patterns
Stars
730
Open Issues
0
Last Commit
1 month ago
Repository
Sairyss/system-design-patterns
Tags
Architecture Pattern Design Patterns Distributed Systems Microservices Microservices Architecture Patterns Scalability Software Architecture Software Design System Design

Open Source Agenda Badge

Open Source Agenda Rating
Submit Review Review Your Favorite Project
Submit Resource Articles, Courses, Videos
Submit Article Submit a post to our blog

From the blog

Dec 11, 2022

How to Choose Which Programming Language to Learn First?

From the blog

Dec 11, 2022

How to Choose Which Programming Language to Learn First?