Can2mqtt Save
Bidirectional CAN-Bus to MQTT-Bridge
can2mqtt
can2mqtt connects a CAN-Bus to an MQTT broker and vice versa. You create pairs of CAN-Bus IDs and MQTT topics and choose a conversion mode between them.
Here you can see can2mqtt in action:
Installation
can2mqtt is written in Go and static linked binaries are available here. can2mqtt has no further dependencies. On a Raspberry for example it should be enough to run:
wget https://github.com/c3re/can2mqtt/releases/download/v2.0.0/can2mqtt-v2.0.0-linux-arm -O can2mqtt
chmod +x can2mqtt
./can2mqtt
Usage
The commandline parameters are the following:
./can2mqtt -f <can2mqtt.csv> -c <can-interface> -m <mqtt-connectstring> [-v]
Where can2mqtt.csv is the file for the configuration of can and mqtt pairs, can-interface is a socketcan interface and mqtt-connectstring is string that is accepted by the eclipse paho mqtt client. An additional -v flag can be passed to get verbose debug output. Example:
./can2mqtt -f /etc/can2mqtt.csv -c can0 -m tcp://127.0.0.1:1883
can2mqtt.csv
The file can2mqtt.csv has three columns. In the first column you need to specify the CAN-ID as a decimal number. In the second column you have to specify the convert-mode. You can find a list of available convert-modes below. In the last column you have to specify the MQTT-Topic. Each CAN-ID and each MQTT-Topic is allowed to appear only once in the whole file.
Example:
112,none,huette/all/a03/door/sensors/opened
113,2uint322ascii,huette/all/000/ccu/sensors/time
115,uint322ascii,huette/serverraum/000/filebitch/sensors/ftp_diskusage_percent
116,uint322ascii,huette/all/000/router/sensors/rx_bytes_s
117,uint322ascii,huette/all/000/router/sensors/tx_bytes_s
118,uint322ascii,huette/clubraum/000/ds18b20/sensors/temperatur
119,uint322ascii,huette/all/000/airmonitor/sensors/temp
120,uint322ascii,huette/all/000/airmonitor/sensors/hum
121,uint322ascii,huette/all/000/airmonitor/sensors/airq
122,uint322ascii,huette/all/000/airmonitor/sensors/pm2_5
123,uint322ascii,huette/all/000/airmonitor/sensors/pm10
Explanation for the 1st Line: For example our Doorstatus is published on the CAN-Bus every second with the CAN-ID 112 (decimal). can2mqtt will take everything thats published there and will push it through to mqtt-topic huette/all/a03/door/sensors/opened.
convert-modes
Here they are:
| convertmode | description |
|---|---|
none |
does not convert anything. It just takes a bunch of bytes and hands it over to the other side. If you want to send strings, this will be your choice. If you have a mqtt payload that is longer than eight bytes, only the first eight bytes will be send via CAN. |
bytecolor2colorcode |
Converts an bytearray of 3 bytes to hexadecimal colorcode |
pixelbin2ascii |
This mode was designed to adress colorized pixels. MQTT-wise you can insert a string like "<0-255> #RRGGBB" wich will be converted to 4 byte on the CAN-BUS the first byte will be the number of the LED 0-255 and bytes 1, 2, 3 are the color of red, green and blue. |
16bool2ascii |
Interprets two bytes can-wise and publishes them as 16 boolean values to mqtt |
| uint | |
uint82ascii |
one uint8 in the CAN-Frame to one uint8 as string in the mqtt payload |
4uint82ascii |
four uint8 in the CAN-Frame to four uint8 as string seperated by spaces in the mqtt payload. |
8uint82ascii |
eight uint8 in the CAN-Frame to eight uint8 as string seperated by spaces in the mqtt payload. |
uint162ascii |
one uint16 in the CAN-Frame to one uint16 as string in the mqtt payload |
4uint162ascii |
four uint16 in the CAN-Frame to four uint16 as string seperated by spaces in the mqtt payload. |
uint322ascii |
one uint32 in the CAN-Frame to one uint32 as string in the mqtt payload |
2uint322ascii |
two uint32 in the CAN-Frame to two uint32 as string seperated by spaces in the mqtt payload. |
uint642ascii |
one uint64 in the CAN-Frame to one uint64 as string in the mqtt payload |
| int | |
int82ascii |
one int8 in the CAN-Frame to one int8 as string in the mqtt payload |
4int82ascii |
four int8 in the CAN-Frame to four int8 as string seperated by spaces in the mqtt payload. |
8int82ascii |
eight int8 in the CAN-Frame to eight int8 as string seperated by spaces in the mqtt payload. |
int162ascii |
one int16 in the CAN-Frame to one int16 as string in the mqtt payload |
4int162ascii |
four int16 in the CAN-Frame to four int16 as string seperated by spaces in the mqtt payload. |
int322ascii |
one int32 in the CAN-Frame to one int32 as string in the mqtt payload |
2int322ascii |
two int32 in the CAN-Frame to two int32 as string seperated by spaces in the mqtt payload. |
int642ascii |
one int64 in the CAN-Frame to one int64 as string in the mqtt payload |
Unidirectional Mode
Normally can2mqtt works in bidirectional mode, that means all messages von can are send to mqtt and vice versa. If you wish you can run can2mqtt in a unidirectional mode to only send messages from can to mqtt or only mqtt to can. To do so you have to use the flag -d with one fo the following settings:
| dirMode | effect |
|---|---|
| 0 | bidirectional mode, messages will be send from can to mqtt and vice versa |
| 1 | unidirectional mode, messages will only be send from CAN-Bus to mqtt broker |
| 2 | unidirectional mode, messages will only be send from mqtt broker to the CAN-Bus |
Open Source Agenda Badge
