Shelly Homekit Versions Save

• Big highlight of the release: support of RGBW2 by @timoschilling , @jobl1978 and @andyblac (kudos!)
• Fix for HAP becoming unresponsive after 25 days (https://github.com/mongoose-os-apps/shelly-homekit/issues/129)
• Password protection (#82)

Full commit log.

If updating multiple devices, you may find it easier with a script.

Please consider supporting development by donating:

Changes since 2.8.1:

• Connection stability issues

Full commit log.

If updating multiple devices, you may find it easier with a script.

Please consider supporting development by donating:

Superseded with 2.8.1 - https://github.com/mongoose-os-apps/shelly-homekit/releases/tag/2.8.1

Changes since 2.7.3:

• Valve support (#433) (no timer support and only generic valve and irrigation at the moment - thanks @timoschilling!)
• Doorbell support (#375) (set Input to detached and Input HAP Type to Doorbell - thanks @ZeevoX!)
• Web UI changes, improve layout for phones
• Inverted output mode (#408)
• Longer ramp-up time for roller-shutter (#324)
• Longer sensor release time for garage door opener (#448)
• Fixes for network connectivity issues
• Fix spurious button event detection that could cause device settings reset

Full commit log.

If updating multiple devices, you may find it easier with a script.

Please consider supporting development by donating:

Changes since 2.7.2:

• Fix UI bug with text selection (#392)
• Fix crash when a sensor input is already active during boot
• Increase max number of connections to 12 (#422) and improve connection logic (https://github.com/mongoose-os-libs/homekit-adk/commit/428902ed1bdbc78ce5cd0135c6ad5564f35c368f)

Full commit log.

If updating multiple devices, you may find it easier with a script.

Please consider supporting development by donating:

Changes in 2.7.2:

• Fix auto-off delay input being always disabled
• 1L: Restore functionality of the second input
• Reboot the device if there is no wifi connection for 5 minutes

Full commit log.

If updating multiple devices, you may find it easier with a script.

Please consider supporting development by donating:

Changes in 2.7.1:

• More responsive UI (#50)
• Stability improvements - several instances of stack overflows fixed, should improve firmware stability.

Full commit log.

If updating multiple devices, you may find it easier with a script.

Please consider supporting development by donating:

• Motion, occupancy and contact sensor modes for detached inputs (#294 #297)
• Shelly 1PM, Plug and PlugS power measurement support (#27)
• WiFi stability improvements from Espressif SDK update and use of all-channel scan - this should make the device connect to the AP with the strongest signal instead of the first matching the SSID.
• New temperature curve for NTC, improves system temperature measurement accuracy.
• Fix flashing Shelly 1L running stock 1.9 and later (#323)
• Fix leak of pbufs when closing UDP connections, should improve stability on networks that experience disconnections (#252)

Changes in 2.6.0:

• Shelly 1L support (#192)
• Improved noise filtering (should fix #288)
• Inverted input mode (#220)
• Activation switch mode (#278)
• Failsafe mode (documented here)
• Shelly Plug S: enable physical button, use blue LED instead of red for status, change default type to outlet.
• Shelly Plug: change default type to outlet.

Changes in 2.6.1:

• Fix stock model for i3
• Fix migration from early config (regression in 2.6.0, #298)

Full commit log.

If updating multiple devices, you may find it easier with a script.

Please consider supporting development by donating:

Notable changes:

• Shelly i3 support
• Fix input handling logic in roller shutter mode (#254)

Full commit log.

If updating multiple devices, you may find it easier with a script.