SmartDeviceLink In-Vehicle Software and Sample HMI
NONE
HMI level is missed for RPCs in "WidgetSupport" policy group
Startup PTU triggers are not checked for HMI PTU in EXTERNAL_PROPRIETARY mode
ResumeController considers WARNINGS with message as reason to fail resumption
Unable to build SDL with -DCMAKE_BUILD_TYPE=Release on Ubuntu 20.04
SDL doesn't wait for IsReady responses from HMI to send ACK or RAI response
SDL resumes App's defined keyboard properties if they have been reset
Add default value for maskInputCharacters to ResetGlobalProperties
FAIL occurs in ApplicationHelperTest when unit test is performed with SDL Core 7.0.0
For some RPCs, Core does not unsubscribe from softbuttons after receiving a response
SSL Context should use MACRO instead of direct struct access
Revoked app can be activated via device consent in EXTERNAL_PROPRIETARY
PerformInteraction: SDL sends success = false in case of UNSUPPORTED_RESOURCE
Resumption doesn't work in the next ignition cycle after unexpected disconnect for 2nd app
Revoked app does not receive OnHMIStatus upon registration in EXTERNAL_PROPRIETARY
SDL allows starting Video service for 2nd version of SDL protocol
SDL doesn't allow VD parameters if parameters section is omitted in policies for OnVehicleData
SDL Core ignores OnWayPointChange from NAVIGATION App Service Provider
SDL transfers OnVehicleData to mobile app if VD param does not exist in app's assigned policies
SDL must start heartbeat only after first Heartbeat request from mobile app
[SDL 0252] Aligning HMI and MOBILE API for pcmStreamCapabilities
[SDL 0152] Driver Distraction Improvements: Command List Limitations
Wrong order of the requests that SDL sends on device disconnection
SDL does not send BC.PolicyUpdate to HMI if no apps are registered
SDL crashes in case 'AppStorageFolder' doesn't have read/write permission
SDL core dump is observed when send SDL_STOP message to mqueue (iAP)
[SDL4.0]SDL does not create icons folder in case it was removed after SDL start
SDL retry send StartStream/StartAudioStream less on one time than configured in .ini file
SDL sends OnAppInterfaceUnregistered with the reason IGNITION_OFF during FACTORY_DEFAULTS exit
ResetGlobalProperties does't reset HELPPROMPT and VRHELPITEMS to default values
Add missing ssl_context.h include in security_manager_listener
IP address information isn't updated when a network interface is removed
SDL doesn't start PTU on Days, Ignition Cycles or new Ignition cycle triggers for HTTP policy mode
SDL must store OnWayPointChange internally and re-send this notification to each subscribed apps
Core does not respond to StartService with encrypted=true if PTU timed out
SDL Core sends HMI capabilities to Proxy before getting capabilities from HMI
CCB: Possible undefined behavior in case thread stopped before it was actually started.
[SDLOPEN] SDL doesn't check result codes of HMI IsReady response
CCB: App not Un-Registering when trying to Force Close Nav App
SDL does not send SubscribeWayPoints request to HMI in case of resumption
Media app is not activated during active embedded navigation
Non-media app must be activated during active embedded navigation
SDL must set media app to LIMITED and AUDIBLE due to active embedded navigation
The OnEventChanged notification provides the wrong state info during app activation
Media app: system supports audio mixing and embedded navigation starts streaming (TTS session)
add webengine_websocket to TransportTypeProfileStringFromDeviceHandle
[SDL 0252] Aligning HMI and MOBILE API for pcmStreamCapabilities
[SDL 0152] Driver Distraction Improvements: Command List Limitations
Wrong order of the requests that SDL sends on device disconnection
SDL does not send BC.PolicyUpdate to HMI if no apps are registered
SDL crashes in case 'AppStorageFolder' doesn't have read/write permission
SDL core dump is observed when send SDL_STOP message to mqueue (iAP)
[SDL4.0]SDL does not create icons folder in case it was removed after SDL start
SDL retry send StartStream/StartAudioStream less on one time than configured in .ini file
SDL sends OnAppInterfaceUnregistered with the reason IGNITION_OFF during FACTORY_DEFAULTS exit
ResetGlobalProperties does't reset HELPPROMPT and VRHELPITEMS to default values
Add missing ssl_context.h include in security_manager_listener
IP address information isn't updated when a network interface is removed
SDL doesn't start PTU on Days, Ignition Cycles or new Ignition cycle triggers for HTTP policy mode
SDL must store OnWayPointChange internally and re-send this notification to each subscribed apps
Core does not respond to StartService with encrypted=true if PTU timed out
SDL Core sends HMI capabilities to Proxy before getting capabilities from HMI
CCB: Possible undefined behavior in case thread stopped before it was actually started.
[SDLOPEN] SDL doesn't check result codes of HMI IsReady response
CCB: App not Un-Registering when trying to Force Close Nav App
SDL does not send SubscribeWayPoints request to HMI in case of resumption
Media app is not activated during active embedded navigation
Non-media app must be activated during active embedded navigation
SDL must set media app to LIMITED and AUDIBLE due to active embedded navigation
The OnEventChanged notification provides the wrong state info during app activation
Media app: system supports audio mixing and embedded navigation starts streaming (TTS session)
add webengine_websocket to TransportTypeProfileStringFromDeviceHandle
[SDL 0252] Aligning HMI and MOBILE API for pcmStreamCapabilities
[SDL 0152] Driver Distraction Improvements: Command List Limitations
Wrong order of the requests that SDL sends on device disconnection
SDL does not send BC.PolicyUpdate to HMI if no apps are registered
SDL crashes in case 'AppStorageFolder' doesn't have read/write permission
SDL core dump is observed when send SDL_STOP message to mqueue (iAP)
[SDL4.0]SDL does not create icons folder in case it was removed after SDL start
SDL retry send StartStream/StartAudioStream less on one time than configured in .ini file
SDL sends OnAppInterfaceUnregistered with the reason IGNITION_OFF during FACTORY_DEFAULTS exit
ResetGlobalProperties does't reset HELPPROMPT and VRHELPITEMS to default values
Add missing ssl_context.h include in security_manager_listener
IP address information isn't updated when a network interface is removed
SDL doesn't start PTU on Days, Ignition Cycles or new Ignition cycle triggers for HTTP policy mode
SDL must store OnWayPointChange internally and re-send this notification to each subscribed apps
Core does not respond to StartService with encrypted=true if PTU timed out
SDL Core sends HMI capabilities to Proxy before getting capabilities from HMI
CCB: Possible undefined behavior in case thread stopped before it was actually started.
[SDLOPEN] SDL doesn't check result codes of HMI IsReady response
CCB: App not Un-Registering when trying to Force Close Nav App
SDL does not send SubscribeWayPoints request to HMI in case of resumption
Media app is not activated during active embedded navigation
Non-media app must be activated during active embedded navigation
SDL must set media app to LIMITED and AUDIBLE due to active embedded navigation
The OnEventChanged notification provides the wrong state info during app activation
Media app: system supports audio mixing and embedded navigation starts streaming (TTS session)
add webengine_websocket to TransportTypeProfileStringFromDeviceHandle
SDL Core crash after quickly and repeatedly connect/disconnect USB cable
SDL Crash - SIGABRT during execution of transport_manager unit tests
End session handler returns hashId
as a rejected parameter regardless of the service type
Fix issue where building the logger would rebuild all other 3rd party libraries
PerformInteraction only forwards second set of parameters to mobile
SDL does not stop streaming from mobile app with NOT_STREAMABLE state
SDL does not support attribute "until" for any element in Mobile_API
SDL doesn't increment 'count_of_rejections_duplicate_name' counter
SDL incorrectly assigns default permissions for an app if they were defined in preloaded
SDL unregisters streaming app if it's deactivated/activated during StopStreamingTimeout
Sometimes SDL doesn't send OnSystemRequest(LOCK_SCREEN_ICON_URL)
[SDL 0221] Remote Control - Allow Multiple Modules per Module Type
[SDL 0204] Support running the same app from multiple devices at the same time
[SDL 0223] Add Currently Playing Media Image to MediaServiceData
[SDL 0213] Remote Control - Radio and Climate Parameter Update
[SDL 0212] Add Ability to Reuse a SyncFileName for a PutFile
DialNumber: Update HMI API description to match Mobile API description
EmergencyEvent->maximumChangeVelocity data type is incorrect in HMI API
SDL crashes while sending OnSystemRequest in case if RPC service is protected
Audio stream internal data stream error when using socket streaming
SDL is unable to start protected Audio/Video service in multi-transport configuration
SDL respond with not supported resultCode = UNSUPPORTED_RESOURCE for ChangeRegistration
Provide operation result to function file_system::CreateDirectory
Application does not retrieve subscriptions to app service after resumption