Platform Espressif32 Versions Save

Release Notes

• Added support for IDF v5.0 (release notes) with GCC v11.2.0+2022r1
• Updated default partition tables for Adafruit Feather S3 based boards (#996, #997)
• Minor fixes and improvements (#950, #983, #993, #995)

Note:

ESP-IDF v5.0 is a major update for ESP-IDF v4.x. Release v5.0 is mostly compatible with apps written for ESP-IDF v4.x, but there are some breaking changes. Please read the official release notes for more detailed information.

Thanks @Jason2866 @DocWibbleyWobbley for contributions.

Configuration

To utilize this version, please navigate to your platformio.ini (Project Configuration File) and adjust the platform option as follows:

[env:my-esp32]
platform = espressif32 @ 6.0.0

For further exploration of configuration options for the espressif32 development platform, refer to the documentation.

Supported Frameworks

• Arduino - v2.0.6
• ESP-IDF - v5.0.0

Release Notes

• Added new boards:
  • Ai-Thinker ESP-C3-M1-I-Kit
  • BPI-Leaf-S3
  • Cytron Maker Feather AIoT S3
  • Deneyap Kart 1A v2
  • Deneyap Mini v2
  • RedPill ESP32-S3
• Added support for Arduino v2.0.6 (release notes)
• Updated toolchains to v8.4.0r2-patch5
• Updated ULP toolchain to v2.35
• Updated esptoolpy to v4.4.0 (release notes)
• Updated ESP-IDF to v4.4.3 (release notes)
• Fixed HWID values the for the um_pros3 and deneyapmini boards (#964)
• Minor fixes and improvements (#960)

Configuration

To utilize this version, please navigate to your platformio.ini (Project Configuration File) and adjust the platform option as follows:

[env:my-esp32]
platform = espressif32 @ 5.3.0

For further exploration of configuration options for the espressif32 development platform, refer to the documentation.

Supported Frameworks

• Arduino - v2.0.6
• ESP-IDF - v4.4.3

Release Notes

• Added new boards: Ai-Thinker NodeMCU-32S2, Adafruit ItsyBitsy ESP32, Blinker WiFiduinoV2, Blinker WiFiduino32S3, Deneyap Kart G, Deparment of Alchemy MiniMain ESP32-S2, Smart Bee Motion, Smart Bee Motion Mini, Smart Bee Motion S3, Smart Bee S3, SparkFun ESP32 IoT RedBoard, SparkFun ESP32 Thing Plus C, M5Stack Station, TAMC Termod S3, unphone7, unphone8, unphone9, WEMOS LOLIN S3
• Added support for Arduino v2.0.5 (release notes)
• Added support for ESP-IDF v4.4.2 (release notes)
• Updated esptoolpy to v4.2.1 (release notes)
• Synchronized default flash mode for several boards with the latest Arduino core
• Better handling of bootloader configuration #880
• The memory_type option is now used to properly select boot mode (#913, #837)
• Changed OpenOCD option adapter_khz to adapter speed #917
• Fixed default flash mode for OPI memory #904
• Fixed board configuration for esp32s3box #914
• Fixed flash size for Adafruit QT Py ESP32-S3 without PSRAM #886
• Minor fixes and improvements

Thanks @Jason2866, @hamishcunningham, @davy39, @sonidelav, @Tinyu-Zhao for your contributions.

Configuration

To utilize this version, please navigate to your platformio.ini (Project Configuration File) and adjust the platform option as follows:

[env:my-esp32]
platform = espressif32 @ 5.2.0

For further exploration of configuration options for the espressif32 development platform, refer to the documentation.

Supported Frameworks

• Arduino - v2.0.5
• ESP-IDF - v4.4.2

Release Notes

• Added support for overriding reset operations via the project config file (#874)
• Updated approach to preparing proper binaries for debugging and uploading via debug tools (#872)
• Enabled the USB CDC peripheral for DFRobot Beetle ESP32-C3 by default (#888)
• Updated the variant field for LOLIN C3 Mini (#890)
• Updated specs for Denky D4 (#887)
• Fixed the value of the flash_mode field for ESP32-S3-DevKitC-1 (#867)
• Fixed a regression bug with build targets that don't run the platform build scripts (#883)

Configuration

To utilize this version, please navigate to your platformio.ini (Project Configuration File) and adjust the platform option as follows:

[env:my-esp32]
platform = espressif32 @ 5.1.1

For further exploration of configuration options for the espressif32 development platform, refer to the documentation.

Supported Frameworks

• Arduino - v2.0.4
• ESP-IDF - v4.4.1

Release Notes

• Added new boards:
  • Adafruit Feather ESP32-S3 TFT
  • Adafruit Feather ESP32-S3 No PSRAM
  • CNRS AW2ETH
  • Connaxio's Espoir
  • DFRobot Beetle ESP32-C3
  • DFRobot Firebeetle 2 ESP32-S3
  • Seeed Studio XIAO ESP32C3
  • WEMOS D1 R32
• Added support for Arduino v2.0.4 (release notes)
• Updated OpenOCD package to v0.11.0-esp32-20220706 (release notes)
• Arduino build flags now propagated to the global scope for mixed IDF/Arduino projects #848
• Fixed flash memory size for adafruit_feather_esp32s3 #836
• Minor fixes and improvements (#829, #853, #863)

Additional notes

• This release introduces an additional build step that merges all the primary binaries (partitions, bootloaders and the firmware itself) into a single image before debugging or uploading via debug probes. It's a required modification as the latest Arduino core v2.0.4 is shipped with prebuilt bootloaders that don't have proper default file headers anymore. This inconsistency results in bootloops if the firmware is flashed via OpenOCD because OpenOCD has no mechanisms to determine what flash memory settings were used. The only major side effect of this change is that the gaps (e.g. Non-volatile Storage section) between binaries may be erased while debugging or uploading via debug probes. In such cases, it's recommended to use uploading via serial port.
• The adafruit_feather_esp32s3 ID now corresponds to the Adafruit Feather ESP32-S3 2MB PSRAM board. For the No PSRAM variant please use adafruit_feather_esp32s3_nopsram.
• The adafruit_qtpy_esp32s3 board ID has been renamed to adafruit_qtpy_esp32s3_nopsram to match the board manifest content.
• The Arduino version for mixed IDF/Arduino project is locked to 2.0.3 due to linking errors.

Configuration

To utilize this version, please navigate to your platformio.ini (Project Configuration File) and adjust the platform option as follows:

[env:my-esp32]
platform = espressif32 @ 5.1.0

For further exploration of configuration options for the espressif32 development platform, refer to the documentation.

Supported Frameworks

• Arduino - v2.0.4
• ESP-IDF - v4.41

Release Notes

• Added support for the latest ESP-IDF v4.4.1 (release notes)
• Added ESP-based debug probes #828
• Fixed esp32_exception_decoder to handle a possible missing whitespace characters
• Minor fixes and improvements #830

Configuration

To utilize this version, please navigate to your platformio.ini (Project Configuration File) and adjust the platform option as follows:

[env:my-esp32]
platform = espressif32 @ 5.0.0

For further exploration of configuration options for the espressif32 development platform, refer to the documentation.

Supported Frameworks

• Arduino - v2.0.3
• ESP-IDF - v4.4.1

• Added compatibility with PIO Core 6.0
• Improved support for bare assembly programming

• Added new boards: Adafruit Feather ESP32-S3 No PSRAM, Adafruit Feather ESP32 V2, Adafruit QT Py ESP32, Adafruit QT Py ESP32-C3, Adafruit QT Py ESP32-S3, AirM2M CORE ESP32C3, Deneyap Kart 1A, Espressif ESP32-S3-DevKitC-1, Espressif ESP32-S3-Box, ESP32S3 CAM LCD, WEMOS LOLIN C3 Mini, WEMOS LOLIN S2 Mini, WEMOS LOLIN S2 PICO, Trueverit ESP32 Universal IoT Driver MK III, Unexpected Maker FeatherS3, Unexpected Maker PROS3, Unexpected Maker RMP, Unexpected Maker TinyS3, SQFMI Watchy v2.0
• Added support for Arduino v2.0.3 (release notes)
• Refactored processing of IDF linker fragments #760
• Fixed an issue with improper optimization level for IDF bootloader that caused bootloop in debug mode #739

• Added new boards:
  • Adafruit Feather ESP32-S2 TFT
  • Adafruit QT Py ESP32-S2
  • DPU ESP32
  • PyCom WiPy3
  • Wireless-Tag WT32-ETH01
• Added support for Arduino v2.0.2 (release notes)
• Updated esptoolpy to v3.3 (#770) (release notes)
• Added CMSIS-DAP as available debug probe (#771)
• Minor fixes and improvements

• Added new board TTGO T-OI PLUS RISC-V ESP32-C3
• Added support for Arduino v2.0.1 (#619) (release notes)
• Updated toolchain packages to v8.4.0-patch3