Working Title FS Packages
This is a mod for MSFS2020 that aims to improve the in-game G3000 and G5000. The goal is to bring functionality closer to the real-life units, with a focus on both features and layout/UI.
This mod was created with cross-compatibility in mind. It modifies the minimum number of base files possible to achieve its goals, so it should be compatible with most other mods, including all other WorkingTitle mods. However, because of the nature of the mod, it will conflict with other mods that make changes to the G3000.
Download workingtitle-g3000-v0.7.5.zip
from the Github release page. Do not download the Source code files unless you are sure you want those.
To install, copy the workingtitle-g3000
folder from the zip file into your Community
directory.
If you want to enable the road display for the navigation map, you must also download workingtitle-g3000-roaddata-v0.2.0.zip
from the Github release page. To install the road data package, copy the workingtitle-g3000-roaddata
folder from the zip file into your Community
directory. Requires 1.4 GB of hard drive space.
Certain mod settings can be customized via a configuration file which is located at workingtitle-g3000\html_ui\WTg3000.cfg
. Documentation for the various settings can be found in the file itself. If you make changes to the file while the game is running, you must restart the game for the changes to take effect.
If you make changes to the configuration file, remember to back it up before updating the mod.
This mod enables the G3000/5000 to natively display Navigraph charts. Use of this feature requires an active Navigraph Ultimate subscription (and internet connection). You will also need to link your Navigraph account within the sim. To do so, follow the instructions below:
During a flight, you can check your Navigraph account link status in the GTC Database Status page. If both the Standby and Active fields display "Available", this means an account has been linked and chart database access is available. If the Standby field displays "Available" and the Active field displays "None", this means an account was linked but access has expired and you need to re-authenticate using the above process to restore chart database access. If both fields display "None", this means no Navigraph account has been linked.
Please refer to the changelog for a more detailed description of changes in this release.
Fixes
crossover_speed
setting in asobo-aircraft-tbm930\SimObjects\Airplanes\Asobo_TBM930\flight_model.cfg
to 0. If you use the TBM improvement mod, you should change the value in the flight_model.cfg
file found in that mod's folder.workingtitle-g3000
and be contained in a .zip file named workingtitle-g3000-v[version number]
.Welcome to the Working Title CJ4 v0.12.8. This version brings compatibility for MSFS Sim Update 6 (game v1.20.6.0), as well as a number of other enhancements and small fixes.
In this release we also have a number of community submissions. Thanks to everyone, as always, for your contributions! We really love working with you all.
Please, please, please read the guide for instructions on using features. A lot of hard work went into writing the guide and the Discord channels are clogged with questions that are readily answered in the guide.
GUIDE: https://docs.google.com/document/d/1qzxPMTSQRkvau8QOi7xUqNvjx9rbww_qHlso5AT5OnI
Installation is easy, simply copy the workingtitle-aircraft-cj4
folder inside the zip file to your MSFS Community folder.
Important: We recommend that you fully delete the previous workingtitle-aircraft-cj4
folder before copying this release.
Welcome to the Working Title CJ4 v0.12.7. This version brings some post MSFS Sim Update 5 fixes.
Thanks to everyone, as always, for your contributions! We really love working with you all.
Please note that the core sim interaction/model behaviors have changed dramatically with SU5, and there is a new interaction system. See the Known Issues for some issues with this. We highly recommend using the new LOCK Cockpit Interaction System with Instrument Tooltips off. To access these settings, go to Options -> General Options -> Accessibility.
Please, please, please read the guide for instructions on using features. A lot of hard work went into writing the guide and the Discord channels are clogged with questions that are readily answered in the guide.
GUIDE: https://docs.google.com/document/d/1qzxPMTSQRkvau8QOi7xUqNvjx9rbww_qHlso5AT5OnI
Installation is easy, simply copy the workingtitle-aircraft-cj4
folder inside the zip file to your MSFS Community folder.
Important: We recommend that you fully delete the previous workingtitle-aircraft-cj4
folder before copying this release.
If you have the Working Title Simulations G1000 NXi installed, you do not need this mod installed. This mod and the new NXi cannot be installed at the same time. Similarly, if you would prefer to use this light G1000 mod for the engine pages, you will need to uninstall the NXi. Thanks!
Due to changes in how planes load their configurations in WU4, we had to change the code that loads custom display gauges from WTEngineDisplay.xml, as is done with our sample for the G36. In order to get these to work now, aircraft creators or modders must put the contents of the WTEngineDisplay
section directly into panel.xml, within the body of the main PlaneHTMLConfig
section. This is unfortunate, but it was the only way we could preserve this functionality. Doing this to your panel.xml is fully backwards compatible and will not break planes that don't use the modded G1000.
Welcome to the Working Title CJ4 v0.12.6. This version brings compatibility for MSFS Sim Update 5, as well as a number of other enhancements and small fixes.
In this release we also have a number of community submissions. Thanks to everyone, as always, for your contributions! We really love working with you all.
Please note that the core sim interaction/model behaviors have changed dramatically with SU5, and there is a new interaction system. See the Known Issues for some issues with this. We highly recommend using the new LOCK Cockpit Interaction System with Instrument Tooltips off. To access these settings, go to Options -> General Options -> Accessibility.
Please, please, please read the guide for instructions on using features. A lot of hard work went into writing the guide and the Discord channels are clogged with questions that are readily answered in the guide.
GUIDE: https://docs.google.com/document/d/1qzxPMTSQRkvau8QOi7xUqNvjx9rbww_qHlso5AT5OnI
Installation is easy, simply copy the workingtitle-aircraft-cj4
folder inside the zip file to your MSFS Community folder.
Important: We recommend that you fully delete the previous workingtitle-aircraft-cj4
folder before copying this release.
This is a mod for MSFS2020 that aims to improve the in-game G3000 and G5000. The goal is to bring functionality closer to the real-life units, with a focus on both features and layout/UI.
This mod was created with cross-compatibility in mind. It modifies the minimum number of base files possible to achieve its goals, so it should be compatible with most other mods, including all other WorkingTitle mods. However, because of the nature of the mod, it will conflict with other mods that make changes to the G3000.
Download workingtitle-g3000-v0.7.4.zip
from the Github release page. Do not download the Source code files unless you are sure you want those.
To install, copy the workingtitle-g3000
folder from the zip file into your Community
directory.
If you want to enable the road display for the navigation map, you must also download workingtitle-g3000-roaddata-v0.2.0.zip
from the Github release page. To install the road data package, copy the workingtitle-g3000-roaddata
folder from the zip file into your Community
directory. Requires 1.4 GB of hard drive space.
Certain mod settings can be customized via a configuration file which is located at workingtitle-g3000\html_ui\WTg3000.cfg
. Documentation for the various settings can be found in the file itself. If you make changes to the file while the game is running, you must restart the game for the changes to take effect.
If you make changes to the configuration file, remember to back it up before updating the mod.
This mod enables the G3000/5000 to natively display Navigraph charts. Use of this feature requires an active Navigraph Ultimate subscription (and internet connection). You will also need to link your Navigraph account within the sim. To do so, follow the instructions below:
During a flight, you can check your Navigraph account link status in the GTC Database Status page. If both the Standby and Active fields display "Available", this means an account has been linked and chart database access is available. If the Standby field displays "Available" and the Active field displays "None", this means an account was linked but access has expired and you need to re-authenticate using the above process to restore chart database access. If both fields display "None", this means no Navigraph account has been linked.
Please refer to the changelog for a more detailed description of changes in this release.
crossover_speed
setting in asobo-aircraft-tbm930\SimObjects\Airplanes\Asobo_TBM930\flight_model.cfg
to 0. If you use the TBM improvement mod, you should change the value in the flight_model.cfg
file found in that mod's folder.workingtitle-g3000
and be contained in a .zip file named workingtitle-g3000-v[version number]
.This is a mod for MSFS2020 that aims to improve the in-game G3000 and G5000. The goal is to bring functionality closer to the real-life units, with a focus on both features and layout/UI.
This mod was created with cross-compatibility in mind. It modifies the minimum number of base files possible to achieve its goals, so it should be compatible with most other mods, including all other WorkingTitle mods. However, because of the nature of the mod, it will conflict with other mods that make changes to the G3000.
Download workingtitle-g3000-v0.7.3.zip
from the Github release page. Do not download the Source code files unless you are sure you want those.
To install, copy the workingtitle-g3000
folder from the zip file into your Community
directory.
If you want to enable the road display for the navigation map, you must also download workingtitle-g3000-roaddata-v0.2.0.zip
from the Github release page. To install the road data package, copy the workingtitle-g3000-roaddata
folder from the zip file into your Community
directory. Requires 1.4 GB of hard drive space.
Certain mod settings can be customized via a configuration file which is located at workingtitle-g3000\html_ui\WTg3000.cfg
. Documentation for the various settings can be found in the file itself. If you make changes to the file while the game is running, you must restart the game for the changes to take effect.
If you make changes to the configuration file, remember to back it up before updating the mod.
This mod enables the G3000/5000 to natively display Navigraph charts. Use of this feature requires an active Navigraph Ultimate subscription (and internet connection). You will also need to link your Navigraph account within the sim. To do so, follow the instructions below:
During a flight, you can check your Navigraph account link status in the GTC Database Status page. If both the Standby and Active fields display "Available", this means an account has been linked and chart database access is available. If the Standby field displays "Available" and the Active field displays "None", this means an account was linked but access has expired and you need to re-authenticate using the above process to restore chart database access. If both fields display "None", this means no Navigraph account has been linked.
Please refer to the changelog for a more detailed description of changes in this release.
Fixes
crossover_speed
setting in asobo-aircraft-tbm930\SimObjects\Airplanes\Asobo_TBM930\flight_model.cfg
to 0. If you use the TBM improvement mod, you should change the value in the flight_model.cfg
file found in that mod's folder.workingtitle-g3000
and be contained in a .zip file named workingtitle-g3000-v[version number]
.