Amiberry Versions Save

• bd963dc12303e9bb516a767c06d3e4a809998c11 Updated WHDLoad DB XML to latest version (2022-04-13)
• 279c458e4dcc37f9f0a4cb3689ec44853202534d #937: Make sure that when we go Up from About we also land on Quit, not Shutdown
• 489f36320cd5ed9bb2cddd6fe27cc7aa005c8bbf Fixed #942: D-Pad would not work when using Retroarch configs
• 9d8619bdd7726f67124e2cca88c81fd12773df14 Fixed #937: If shutdown button was disabled, you could no longer navigate to the bottom button row
• 56dbfd57bf3d1dd46b185075b3000a78a3bd9f31 WHDBoot: Use SHA1 checksums as a fallback if filename doesn't match
• e975c0e8471f43c53e5169d35227bfd9df7da222 Recognize .chd and .iso as CD images when using --autoload
• 0161306e42b7f13f4a6306f415d79a1e59af7ab0 Added missing uae-configuration in boot-data.zip
• a7c13292efafa738b52289a3708c9f1300027c68 Updated WHDBooter XML to latest version
• dea9ea3fdc14da494139a3574fd869ccc1225e61 Added sources for AMOS-based WHDbooter
• 26253a6b0b09aeb12e72842876035eaad3e88100 Fixed #929: DMX auto-height would not increase height size dynamically, only reduce it
• ad41dea8c15c409c6e545b46af7a72f9547570d0 DMX: Slightly increase minimum Height when auto-height is enabled, to avoid cases of some lines being cut-off (Lotus Esprit) #929
• bfc8cada21f6f381623954353fead2ac284cfd58 DMX: Fixed Width/Height and Centering would be reset to defaults, if changed when Auto-Height/Crop was enabled #929
• e017a97b9623e3f6cc38e2dcd44a7023f6acab4a DMX: Auto-Height fixes
• 0833d585a94ffd61097f7d94cbfe9fe401bca6a7 DMX: Minor code cleanup when calculating aspect ratio
• d6b3dd123c9bffc8ef0d6bcf51ead92ed18177e9 Fixed naming of auto-height->auto-crop in amiberry.conf
• 7b6357ad205029238625a3321a4ebd4d58c378e3 Revert input auto-switch back to enabled by default
• 33eb328486ce8e7f54c8caa80a62163d06aba48f Fixed case when creating folder in make-bundle

This list of changes was auto generated.

• 66d493d5ba2e140b6b7459b5d3816e65ce3dfebc Fixed #922: Auto-Crop rect should be reverted when P96 screens open
• 33250cb2d6f717c496b841598de7a00e9b017940 Fixed 919: Auto-Crop would sometimes cause crashes
• 67a5d09cbf273fc9d73eb316a84ae5dca926d0c0 GUI: Implemented support for SHIFT + Numeric and Symbol keys, in Textboxes and TextFields
• 002f34b9062eeab89f77d154e30e552f196a92ad Updated version date
• 2edea848cd7b440a928454027b1405d8e5da9400 AutoCrop performance improvements
• 727ef6d6d6292b78a49afd5aac42a52c95ce07dd Updated WHDLoad db to latest version
• 00e94de296065bc48fda998573d9b8c076d69adf Updated version date
• fc3b2bb7942a637fb89c745e8d684f8c121a02b1 Fixed #917: Controller D-Pad was not mapped until GUI was opened once
• 4171ea2f6d76e75e7f0212cc9006ba7e5ec9f1b8 Cleanup: Removed assembly routines that were no longer being used
• 941550562c92033299dc194a306918a203ee785b Updated version date
• 3a0e9a2d906c65aacb96e140fdeb66cbdf9b308d #914 Added uae_pragmas header from host-run
• 24c3ec10bc5258f4c979588b2bb65ad1a03023f2 Renamed Auto-Height to Auto-Crop in GUI
• 223c03ee1635afedd354079a23fd6721472731df #916: Fixed crash when starting emulation with Auto-Height enabled
• 00400b864850583d4fa0def817c91f2643a29655 Auto crop now also crops image horizontally (Auto-center H/V highly recommended for now)
• baabdf143c51b8a264129ccc11ad6cc2d81bd2b2 Updated version date
• 37c0a1e91eb8feeab3c9bf2bde70364664aee6fd Commented out genlock related buffers (unused)
• b62a9ac025ef78b5ea48333a9600cf8a934ad094 Added Auto Crop Image inputevent, possible to map in Custom Controls. Does the same thing auto-height did, but only once and on-demand.
• c9f63c7a517603e8b95b899c2509d2cde256e69e Minor line drawing and auto-height optimization
• da78ab0b17ab61fdf85332e2a144f114dfb4047f Updated readcpu from WinUAE, added missing table68k
• d2fd4c1e4d8c11ae05c3901ceee6c2f31b22f379 Keep previous mode when toggling fullscreen
• c0f04648ac3e17de14c7a6f727922557e43cf9b6 Second 1M ROM bank divided to 2x512k banks
• b64d26dfafcce185aed30d29106c2ff36db5c2e3 CPU/chipset cycle access timing fix
• dabcf78861feadff2f3f8ece24a6a44bbb0fefb7 Updated version date
• 5377dcc8fa011447c4f7178baa077edd2109235b Minor improvement when warping mouse in window
• 9a5b7d31680457a93eb078e7f9d70419c2a3f0b7 Speed up Lightwave rendering time when not using frameskip
• e3dbf6239782f713427b5c9f2e8a1ab695cc40bf Ensure multithreaded drawing option is updated if changed
• 4394bd0ab40e3af571b04226be816b2031c4dab1 Fixed path to wget for Apple Silicon targets
• 3ef51245659cebc16ca4c7955f8fb0789b7ce908 WHDBooter: Moved temp files under /tmp/amiberry, cleanup
• 8e9cbf61e01bd6bb21fd736ef8550cab6ee41e2b GUI: Fixed JIT FPU showing enabled when it really wasn't
• 8fa24e686f4874fc26cac4a7cbebaa6acf086da2 GUI: Fixed bug where JIT FPU could no longer be selected
• 90441f298fbb18a29994f4e8ec44ab902fa81638 Fixed RTB files would not be downloaded on OSX targets
• 6f2d8ffc7b528d11a692bfde9f53bef8a995a38e Improved logging during download_file function
• 2d5fb4246444779d4c02d34bfcbf05bdb425134f Fixed hardcoded whdboot path in Download XML
• cf44b224adad22fdac04402e0b9a551310803267 Improved handling of download_file for OSX (Intel vs M1)
• 96a15515b5a4e2a5714fc135d0b92f47e0231522 Use wget from fixed path on OSX, fixed download file logging junk
• 5b4130df0c5ebebc253af356c5ab3d0ae85640da Updated version date
• e2543c4a720c194a8ca405c8d3be588634dde326 Fixed Get Controllers update button would crash Amiberry after recent commits
• 10a30e605eab085cb333867acf8fccc34c7d7bf7 Fixed linker error about download_file
• 18337f016692fbc1d4883dc73a9db5f0b79017d9 Fixed another reference of download_file, not using string
• 2fce3bd92bb4f614a4218f316ba4617e9ee2b190 Fixed references to download_file after previous commit
• db114daa8761061bbcdebadd151bf94fc354c0a2 Inceased debug buffer length in download_file
• ff7b7855bd06d2db493e53f4202f049f2f3991ff Fix OSX targets didn't get whdboot directory created/copied
• 32f9a86fe801e8f585fc8ba5924371ad00755c39 Added prefix_with_whdboot path and use that, instead of hardcoded paths
• 62e2e38829c3053868731d13dffa3d4ab5fbbdaf Changes to correctly find the App bundle filepath so that Data files are loaded from the App bundle instead of from the current directory (#912)
• 73cffc05ed9024c4d7990e95ec0319e1c61f4b27 Fixed error cannot pass object of non-trivial type 'std::string' (aka 'basic_string') through variadic function
• c016561c7db5d7ef3e946d80ee7f5d25a53b8ef2 Automatically fix old data_dir path if it was identical to the startup path
• 0c457f2be442cafd1c7b9301c1e8aa7b809d8993 Updated version date
• b8a930d01c1b0a192d4c88604264d634814d5e4e Get configured data path instead of hardcoding data/ in filenames
• b39cef410bb0194742055991640e577a9fa30744 Updated Copyright years
• 383d62688095f45a4cf163542b71689afac0269e VS: Added floppy_sounds in project
• 27c8b7f0b983bb2cdebbfa1efd2ff07d75041c96 Fixed data/ path handling
• c14711097bcd2e51f9858f0573170a2f660ec0cb Updated version date
• 1c77d2ebf77ade419eb99bf37c12478a32cf5cda Fixed crash in some cases, when running WHDLoad titles and switching between GUI/Emulation
• 8d02ef3a9fcd610bf72a0f60aa9260ec2331cf84 Updated UAE version to 5.0.0 as well
• 1bf2e500576cf8cf939d046f77354f9dec1f8209 Input: Make it easier to see if a device was initialized as a controller or joystick, in the log
• c0f9606dae95a2248236d311cf576bb43f4081b2 Input: Ensure friendlyname is not empty, before returning it
• 09f6247f12856bcb71bebc2226bda338f5320754 Input: Assign joystick name to name as well, during init
• 1d9d97c7efde816f899e2b0d66562b0eb673569f Bumped version to 5.0
• e16d4f08c33e758fed5fb6f626e96eb8b48d1374 Sync filesys with dev
• 517bae212e9227594d483b35fa7df25bf2e3b6a8 VS: Fixed filters file after merges
• 3f7ea4b8e846105e67635c26a700efa7338077c1 Input: Fixed bug where RetroArch mappings would always invalidate the LeftY axis
• 437f015aa7383481b4a9905607206e75abc22b4e Input: If retroarch is used, always show Joystick name in Custom Controls panel
• 9ddd80f73b123e536886e58db4c2ef18b1aad4c1 Input: Get both Controller and Joystick names during joystick init
• 6a5f0fea3edff910a126617fb78a36f274aa13ed Optimized internal handling of id generation for custom controls, floppy and HD panels
• cba6451d7a555e321f024d45bf3001bba22413ad Fixed navigation in Custom Controls
• a6a201e1138eab338f5c70fc78f4e217a88488fc Input: added option to set hotkey button, if not using retroarch configs
• 0aae04501a481cbe1e95a642cb31de137fe921ef Merged "Analog remap" and "Mousemap" options under "Mousemap". Removed obsolete option from Custom Controls panel
• b6ab0110f99f459e9a7c8f40a6a7e534767e02e2 Remap: Implemented navigation for new buttons
• 4f0f8b20c80e2ca87a0a120a8fcaa93969141537 Remap: Apply and save mapping result to gamecontrollerdb_user.txt
• 760a0bc8c16190e66b4d8ceef74833510df0faf5 Remap: Text workaround for non-SDL2 targets
• 6f1c94fc11475a09f5f4f2c51873a6652c134eb0 VS: Fixed Debug-Dmx ARM64 remote working path
• 61aadb08265c42685bd1cc4418aaecb718164074 Remap: WIP dmx implementation (not fully working yet)
• eab00c3339ea401a5c71b4f1fce9bf37f0465943 VS: Fixed include paths for DMX project
• 681a2415de026019563cad6333b55cd6bde1050d Converted controller files to PNG
• de14df5e9596bd08fd4e0e3d0ff025bd4a9287b4 Fixed compile for SDL 2.0.10 as well
• 926152757713a55bb582994fffbcfa322365b615 Fixed compiler errors for Dispmanx and OpenGL targets. Not implemented for those yet!
• 00d463b9a821aad36c4ff6e71b432e5247b129b8 Fix SDL_FALLTHROUGH caused compile to fail on older SDL2 versions (e.g. Bullseye has 2.0.14)
• fde861df66d3b732995490c3c7ae4191944542ba VS: added controllers dir in project
• 02ea6445dacff1aed28e53780b4b9939168f33b8 Remap: WIP implementation of Controller Map window inside guisan
• e3d44a06717111cb85cf3c47bf7606bd9dd68556 Minor optimization in Show Message
• bd5eb2101cbbb15dc8d9e76e2d7542ed88f77221 Updated controllerMap code with latest version from SDL2
• 653a212e83ed43b87cef8e4dc9a8d1be40b20897 Merge branch 'remap' into dev
• 51a802492244751b4b4152fc8f3185e1c5d1acff Input: Fixed bug where hotkey mappings were never applied
• f07b0a66516eb9c87475843c8daaf7e4282e06b9 Fixed potential crash, if button or axis name is NULL
• bf3052a1c58adee28dd0af5c3dea76629711696b Input: Re-enable RetroArch mapping support
• 2ca7b8d05d4dcc6f02969c7174566e769d7572c5 Input: Added default axis mapping array, show it in Custom Controls
• 87bdd03a5a62531a05b21622776af81d365ed3bc Input: WIP - handle custom controls mapping as well
• 96e5bb89fb7e116827d98cc2e15f460d1875a0d2 Increased max buttons to 64, to handle hotkey combinations
• fcc7b5c53faafc7c5ee28a36c2ba22ea0fec65fb Input: WIP - all events except Custom Controls should be mapped now
• ece9d3f8d0c1cfbed464b5ebd2d5bb3fe10e7581 Input: WIP - removed events that are already mapped earlier
• 3d9aeb96ec659ec39952c1a73ee5929d7391d5d8 Input: WIP - use WinUAE method of mapping buttons/axes
• 400f1aebc0b3a30eecedf7b996b19552ce1c57e1 didata: Initialize all fields
• a11c57ec11003ea922dd0fffd36055a8ba02195d Minor refactoring in process events
• 8343920266a38cc586096f96ceb4920b9bf6acd0 Added more input events in Custom Controls list
• 0e1b4dc6f03e2ce9fd4defe4aa27dd330d35e273 WIP: Controller handling rewrite, to support axis mapping
• 4cee37b388ad094299ef7bcc387f2c60ea042eff Input: Fixed bug where RetroArch mappings would always invalidate the LeftY axis
• 6b3b72a1f473c09ed45d0897771bbb21fa506171 OSX: Skip JIT files until they are supported
• 9a1fc6bcc6fe99299cab038dd3021e1bcbdbb053 Added missing default whdboot path
• 909fce60b5ce51752c3534eac799f3b926bef76e Fixed #906: After pushing Restart, you could no longer Quit Amiberry
• 2c63979ba88ab16e4f7ee8b75abf452cbff81659 Fixed compile options for CLion when using x86-64 target
• 656f931ac5ab72d2e35b78a3abf271af6463e431 Fixed #904: The DMX black background layer would stay on top in some rare cases, when entering the GUI. Triggering an event (e.g. moving the mouse or pressing a key) would show the GUI, but go back to the black element.
• 46df32241f8a68cbbef4becc083d149cd8cc1129 VS: fixed deployment path for Debug-DMX target
• 27b0bb44b4de64207a40aeddb4916466cc5ce081 Update README.md
• 673948f54853d34d4f46c90a4853f65e2d0b1579 Fixed JIT would not be selected in GUI anymore
• e422732b80e27bc05e79a15bbadcaedcd509f40d Fixed Enter GUI Hotkey with modifiers was not respected when GUI was open
• 394eebbf7c98e18978db33e7826fe01d9febae8e Added new whd default options
• 6621b951e138cfe29e44d7ad89eb65fe373230a4 Allow HighDPI mode for GUI window also, if that's the first one that opens
• a81470f542bf23add8bbcd262c92aef38c7119b6 Fix compile for older GCC versions (e.g. Retropie still has 8.3.0)
• a19f2ba1babafe73344b060bfbdb2720bd9a201f Allow High-DPI mode if supported (e.g. OSX)
• da3e5241f40c0c002f27c90016940e46d0357586 Fixed OSX doesn't have sendfile.h, improved copyfile by using C++17 approach
• 934b158687aa5a2920c1d706635586fc2677d3e9 Added OSX x86-64 platform, renamed OSX-M1
• c4353bb37aed0c7cbb4eb51e01c9313c9250452b Fixed amiberry doesn't start on OSX #897
• eea0c274e8a5f521c6ba0dfbd3b11bfbf7563ec3 Fixed Quit Hotkey would not respect qualifier, improved hotkey handling
• c4add58a00415934366d6328b95fc95ebaab8beb #900: Fixed typo (should be Device Name, not Volume Name)
• 4112fb259c4343ebe3adf39e1cb84cf2c4305246 #900 Updated usage help text, to indicate correct syntax for -W option
• 88062dabe6e3df18b09e14153660a50a43378cef Fixed #900: -W command line did not work (even on WinUAE)
• 3c96934720b1724f712f946ccdea3194ca0e4eb5 Updated version date
• 8d8ec27ce9d518437e8476683a3b025e694b97d9 Upgraded floppybridge to latest version, improved compatibility
• 09f3708e0a01f70aa8f6b4d7474d270ddd9b45be CLion: added WSL toolchain
• 739cf94a86687b39203c6ca990f75d67717cc1e5 Use 64-bit types for registers, when applicable
• ddfdbde4d404b33c6a674ebb27023f06a27f171a Ensure GUI refresh rate is capped at 50-60 FPS
• 074a18820e92fe2f92e14762c90230f088f3d93d GUI: Fixed cap_fps for 50/60Hz was inversed
• 632eb09eb64c2607d365b2859986d44d0b9b272d Makefile: Only include JIT files if supported
• 3a13415f740c184208219a462f7cdaf8f4e70bb7 #594: Added experimental x86-64 target, with no JIT support
• 0998b911f8f215e43415b0ccc05a747a219edd88 Updated cpuemu files from gencpu
• fe3e25e646dc585e8e21771a6e4b257c410c7856 Define CPU_64_BIT for aarch64 also
• cc12917d1b55b0d98145b67a647e9d46f54552ff Fixed compile error after changes in m68k.h
• 9f5bebd5b213365cebe62ed894f6eb76daca9500 Added bash script to compile gencpu
• 68152aa4a630324706b92bfead63ee2087aaacb2 Comment out fpp reset function that is not implemented in x86
• 53dd8a29dcd3e83c26f3e65ebeb8ce943ccfae96 Make gencpu output code valid for both x86 and ARM
• e7fa3ba47d4eb287d6b426e841cf377e4f137483 Added gencpu.cpp file
• 9ad64225993a75020da905e9e0af4a2c50d65e54 Moved is_hdf_rdb function to more relevant area
• d40966d9bbbc47e65ece2eab061626f94cc6f55d newcpu: use system defined byteswap function
• 9dce0aaac46eb27621b6bf8c9ba7222e3dd6cc20 Fix typo from previous commit
• 77d1993f6d9a3f3cfafb820279ba2081c25b8e8d Ensure JIT is only selectable in GUI if it's supported
• aedc8443fb2cd3e4ae41d2abb60c0f93881bff3a Added missing x86 header file for CHD support
• 3bb248dee692f8646f61e2ece8fc1279775d0441 Put more JIT references behind #ifdefs
• 47d4bea603decc941939abadd9f3b33308776b4b Only toggle JIT if JIT is supported
• 318f307847e8a40f6edc8859c3e121c5a08d8d2a Only set JIT cache size on configs if JIT is supported
• 8479825db41db51950b82f21d407778f1cb95aaf treat x86_64 the same way as aarch64, where applicable
• d5b39c27a6fbb0a7f33655bb3233a0eef5c8e6a5 Fix new whd options should be yes/no, not integers
• e215ae5ebb90185de65a20d11387f9475fae54c5 WHDBooter: Better handling of writecache and added quit_on_exit options
• 50f3c5aba51b4d8aa6b353351bf6800984ff1bca WHDBooter: disable AmiQuit for now, cleanup startup-sequence
• abb9576d7cf26a70af79075b5b484de71e70b7cb Updated version date
• b293ed54c9412d8de4aafd2d634ecd35cf642547 Ensure Quit can only be requested once
• 6f5f812b6914615f041110d103e2dfc88b4cdb6e WHDBooter: Implemented option to enable writecache (defaults to false)
• 7321fa04a5bb5a2118e6ac2bb32e4403f3fd4611 Exclude pieces when non-ARM CPUs are used
• 03f5df7dcc178ce15b062dc8b476efc3d72ebb06 WHDBooter: Use 8MB Fast RAM configs, to allow WHDLoad to cache everything
• 1648b1f0477405aa3fdc3b3201e1a73ec6ec7143 WHDBooter: Added AmiQuit tool, to quit emulator after game exits
• ae67d81718d77e8d735af1313c2d0463ad63bc53 WHDBooter: Implemented support for VFAT filesystems
• 31ebc6c0c17cd53d5560b55abf883aa58e277947 Minor formatting fix in bsdsocket
• afa1618fc4156bf8acbe7db3444aa24a94463226 Filesys: Implemented my_existslink and copyfile
• 0b74ea3e41a1585255b2baf968d0617957207160 Removed some obsolete code
• 9d56ad2fb4f39df6706c354cdd5c5b5037085518 Temperature: Fixed missing LED definition in header
• 28021020e80c6d5b081487fe394603d88256f6cc Quickstart: Added 8MB Fast RAM options for A600 and A1200 configs
• b112e0f2e7efaa81fb79e2dc13e2822b93804ad3 WHDLoad: Added FAILAT to top of startup-sequence, to allow script to continue in case of errors
• a54e09283e3c095fb7a7a7ab000f090caee49618 Implemented Temperature monitoring on Status Led
• e1f85ed3959d100b83f05062128c5d5b48d47ad5 Sound: Always show sound buffer usage in Status Line LED
• ad30849cb51086e18da2c9c1ec0c3b40d131b24b Sound Improvements
• d16422573ee14b0f15ca0e827f2e2bfa60b44e9e Updated CLion deployment settings
• c0c469b0fcde83d9f901572f8c104c2f0e8e2e42 Updated version date
• 86f56230c5f68846987eaf6a8763f25691c5e06c Fixed #896: A500 model would default to 1.2 kickstart, if run from the command line
• f703f7e34d813d1c841c0f601cc83283d8f4d07c Fixed Makefile: options that changed CFLAGS needed to be below export CFLAGS
• b6ecb5febf6958ea40f81ac5bf5072fc727c0cbb Updated version date
• 807eb3b4dc397c1ece26ae72be68e9892a6c79d2 Do not show default mapping when Retroarch is used (incorrect actions shown in GUI, due to different default buttons)
• ff35c8a186a8e75a27a5d460ed24f9b80b882573 Refactoring: Moved custom controls arrays to amiberry_input
• b7f3ff402aa14d0fcd3f3871a04f267c2d832610 GUI: Show selected sound card on refresh
• 69b48cc5f34b80fc055ab99a9c49e0576a15ddf0 Moved resource creation to runtime (#894)
• c435d2a6d8dcbf7dde1ef6c0778b258eed89f6b5 Updated version date
• 2240b9a94d798af697080720cf614eaf00f0b52d P96: Don't change chipset refresh rate when opening P96 modes
• db1e0dfe563eb9a184a76dce94d6831a7ce415da GUI: Slightly increase container vertical size, so that all selections fit inside (Savestates was a bit cut-off)
• 64486cce2d8615eae52b814ecf5614ee87662b92 Updated version date
• 75cf0c3fedff2f38f2003b2b76ba6057f454651c P96: Reverted back to memcpy, as benchmarks showed it was marginally faster than the assembly routine
• 3885f525e49f4656e45f93149f9a92c0949cffc8 Always disable Virtual Mouse mode on Dispmanx
• 126637447502bc6d170b621f9732c805a97dde3a GUI: Renamed Frameskip to Refresh, to match WinUAE
• 7e013cc182b72913a3980888665ea7ad964ba3b8 P96: Speed up screen updates
• 6a97a014ef66b636b61b254cdc2791d779e8d8cd Fix guisan failing to build on systems that don't have GL/gl.h
• 9769f46e8331cabfc85b853c2b12f5731c8e7f22 P96: Frameskip was enabled by default
• 2143f360e10efaffc8e128eb92faf034deaffd89 Fix compile errors after latest changes
• 0f264d64aa5330643968322781073e01bff03702 OS X build fixes (#892)
• 5ce6f3226575d70f3b9ef3cf14fed0c99937852a GUI: Fixed some dropdowns in Sound panel were cut-off when opened
• 5367a2ad2f104dc62cf5f45a4310942f70a1b0ab GUI: Improved controls naming
• 8b45d29e8af00024e793cd20cbccb549d18cf00a FloppyBridge: fixed some more typos, minor code modernization
• 7897f6ebeb21f9e37c420088d16832c267151623 Fixed compiler warnings
• 5f257f99475a7feffb9af7e611dac39172095bd6 Updated FloppyBridge files to latest version
• 0d1160f853ef874293b143dd3e03724dd4a80979 Floppybridge: Cleanup and modernize code
• da9515719365071a677088793207fc608478aaaa GUI: Added all A1000 config options in Quickstart
• 7b868e744f75efabf018de8d0d09ec129e3801e0 Further improve reliability of Arduino device
• 4c3d0c5af63a865ebfbc4e6a51c242fd304b374c Minor updates in amiberry_mem
• 02889606c67d8f91c79d36cc7ada332787e086d4 GUI: Improved RAM Panel options
• c546e151d7cf3fc670617a05c689ef3b1d30f51f GUI: Fixed Config panel scrollbar color
• 9f81f6d2e4fe390e06af15be7f01736470464499 Brought back sleep for microseconds
• 4a14574ab50cbb8c17fd4f739954606ccb6b0d87 VS: Use C++ 17 in Release project config
• e249e33072128e9866a5337345537c96967c49b8 Removed sleep from readRotation
• ff8bf9144e6a1627dcff7fb7761a4fb413b122fa Improved performance of FloppyBridge
• a58f42c3514b4010ad485d4ee97a70feb40b92cc Fixed copy-paste typo in disk.cpp
• 178fef50d386de5b67490a324a98349fda7d7cc3 Fix compiler warnings about unused return values
• ef323ba3431de4566516f6fa5ab4336e40acd828 Stop segfaults when RotationExtractor gets positions higher than expected
• f4077f23625dc306fa418260e59c3d776b0f57a5 Updated version date
• 47d4389d7210395918144196b0e359b5b77548cc Implemented Toggle JIT and JIT FPU custom events
• b876adf4ce32ace68f154b817dd730e5023e7182 GUI: Improve positioning of LED dropdowns
• eb1aeb5251237ac33f3df8654914e33a1b30206f Added CapsLock as configurable LED
• fcfd16f60a274954d8441af9d62638075f5d4be1 #890: Implemented Horizontal Offset setting
• 95aca6ca234d7716b3cc346eb4509296dbbeb399 #890: Brought back V. Offset setting
• 56aa1d26bee0a95fe66dd3afc4f378b8a5ce836a Moved FloppyBridge code from external lib to part of Amiberry
• 0f8312f61a86e7a928142137281f42a616dc8c41 Added #ifdef AMIBERRY to amiberry section
• d4e84064280132320fe4d9bca4395ad87491c51d Removed unused code in gfx
• 8e275b5b2473e87fa372ee17cb3d704b751090ea Commented out unused code
• 5fe0f9572538305044d1d58a9355557c38720ae1 Updated version date
• 60066f266565a8c863f2d4f958450bf3efe88383 #624: Possible mouse counter overflow fix.
• a7d8a6ce2c6a4c36fb824a1a70ccf8986d6fe30c Cherry picked CIA fix from dev
• 324fb1a6b79f41c512ca711719eff7cc32f87c8e Disabled DEBUG for OSX target
• 0618b053c0f7fd74921ed1a44469446073531a6e Changed Label to TextBox in Show message, to support multi-line messages
• b6e94d5b0e3ecc68a3d00d0bdcbcda838c78b9d3 Guisan: Updated OpenGL-specific items
• c842360e805230f84d9c983cfc48af4fcfc91b9c Guisan: Added missing return statement in focushandler
• dce6054693b09e3c5d0e24ea47661d77f8751e33 Added new guisan widget in VS Project
• abe35770d4dde160f0f2ddcbc517cfc9a6f2c5d1 Guisan: Added adjustingcontainer widget
• 1c0b811273087f68114377c48b9d4262977f0c1a Bring master up to the same level as dev, for things except blitter, custom, drawing
• b438629f151017d3fa0c892321e4134e46eb5f69 Switched back to RGBA32 pixel format, for improved performance
• 3e382c5793bea305416cefac56e7562bdf315170 Ported to OS X for M1 based Macs (#886)
• 40b7ddb97819066def9c2944b49fcd6d0c72455c Fixed CD Eject from HD Panel would also toggle checkbox
• b9f50eab76cca940e705826ae1e6c529186d1259 Added missing UAE ROM options in GUI
• 3acaf14d39b30d309ab4af48a074fd7a90a8e0cd Don't miss disk index if mfmpos is increased by more than 1 bit
• e746ad15d4394c28ec2ed021032a0cf5d4629be0 Enable sampler init/vsync/free in devices
• 19895451077823a8542ee48baa19c1712f7c288b Fixed sampler option selection in GUI
• 747c52e5168421688f24328af85e2cb77b15d201 Implemented support for multiple sound cards, added Sampler options in GUI
• 73f71adcaa71ef20a2f5172e78ef83e4e656b117 Audio related improvements
• 5413eeb4baa023b84763a8ceb7cdf5549eee53f3 Fixed focus bug in modal windows, which didn't have mouse focus until a click event was triggered
• 4894436da597dc3825f4a0975acbdd573a36b4e8 Fix int overflows in hsync_handler_post() (#880)
• 5ca38e04712c3b0cb9be39eb092545f1ea13a5ed Fixed typo in command line help text
• f8678a51f4ba6c13eb19c033ebc08df1c58cf1ab Fixed bug in GUI, where editing a hardfile entry would change the Device name
• 0363ce60b7dd42d9c77f843c5daad225833b2f82 Fixed command line help formatting
• 4f47ed992228be61e7deb4f41f4805fa531dbeaf Improved command line help
• 3f0a4b8f356503c9fc23423ce7077840d87a1732 Fixed virtual mouse driver should not be enabled when emulating
• bf74e01d561302b4a6fdec17d4b092710fefa2e8 Synced all makefiles with latest changes
• 7b3b97ab7d417e7c347e62a37ab94a3946f981d4 Updated WHDLoad XML to latest version (2022-01-07)
• c599ee1e545286112ad390f6c868715fc8749794 Updated WHDLoad binary to latest version (18.7)
• 7b18d24e0fec354abddf474a426385c67e4ce26e Fixed crash if attempting to open Xz archive that used CRC64
• 555139c72ba0b975a8583dd5f412a3d73a9243a9 Fixed compiler warning
• e3d457a8f568eac84762a3dc2a3673f47533f0ba Updated FloppyDriveBridge submodule to latest version

This list of changes was auto generated.

• e74044cf6ae5450b663549cad0c65930c28f2327 Updated Readme to reflect Makefile changes
• 66f7c7c7292eb3caeb681e96b47d0908fd8e7ad3 Updated Azure Build pipelines with new platform names
• 5368fdb1d291ea33bd73122f3d3676b7a97ce38c Split rpi3/rpi4 64-bit builds to fix -mcpu wrong flag (#845)
• 1845bd98066269a950194fb44891759e5cc273fb Updated version date
• 8fb42568647202a2be8960128a7701da8ca74f5a #843: Don't change GUI Window size if we are in Full Screen mode
• 620ef84ab75011fcd49f6042f73815e51788e8d0 Reverted default sound mode to Push with increased bufffer. Pull caused glitches in some cases
• fd95c63f487b77aed45bdd4bdcb1657b75a6b752 Fixed bug causing full-window mode to always show as windowed
• 8a7b3193c98bf1cd33b4b5d34c6f917b8f105f70 Updated RC5 date
• 1e84fe95fc9f4579656f382680b3f84fcc376b68 Fixed bug where if the GUI window was maximized and emulation started afterwards, the emulator would shut down
• 4cb76e6431e1a6de4aa78f2fa6977f6c8acf3419 Fixed ShowMessage window would always change window size (it shouldn't if it was maximized)
• ce74c0349a958504229284141f98884e6d0af2f4 Merged DrawBridge and GUI updates from dev
• 1bd41521aa41ded4fa059b35e5c108907c21a9e7 Added support for Kickstart 3.2 ROMs
• 53e29b794ca857edf8c726a3eaafe7e52eea3b94 Bumped version to 4.1.5 RC4
• 812a0bace914d31704ebdd4bf9f0203d5e27a921 #782: Brought back multithreaded drawing
• 3839adc1970216117db0810804329ed59cf879e2 VS project cleanup
• 433e7167af919b90e3c73bc0cdacd5236a4d6a36 Don't resize window if it's maximized
• 696fde37985b96f356e4b7b7f3d4cf0c3bd709de Changed "default_fullscreen" option to "default_fullscreen_mode" and made it into an integer. It now controls 3 states: Windowed (0), Fullscreen (1) or Full-Window (2).
• 6cd81029513181e8f1f2b84ee2074283417bec7e #454: Added Warp and Quick Save State functions in Custom Controls
• 72966b517d7173c9a2d92c9256d08be9f88ccbe9 #501: Implemented Warp mode for SDL2 (End + Pause to trigger)
• 178bb03149d113804fb659331d5adddb1a708d1b #821: Added default option for sound pull mode in amiberry.conf
• 966e982b6ebf4cc73ea8945dc05a3e136617fdb2 Added copyright and license info in About panel
• db484fa51e1d8fa3474eac53960e147c6f74bd72 #841: Added label to show timestamp of selected savestate
• 5869e179f621ee3cc8617e2ec313d11d4d0fc06d #841: Increased Savestates to 15
• 4b85d43beccbc863fd67af10b62e6cd99063d98e Bumped version to 4.1.5 RC3
• f558e5cb3ab8be54b82aec25ffcdbc0180bf8ddf Updated Remote deploy/build settings
• 9c1143e27844fc6fad7e566bc01aee79ef455864 Fixed #824: Dispmanx would show black screen if loading another config with different screen dimensions
• 5dfcfcf20f5f645667b64fceddb46c2f73443838 DMX: initialize variable
• 6a54d10cc084ee3a42c9f83b1fe61f4e806736e3 DMX: Remove unused function
• 9725c4004f3acb5e33ee1fe58d680ef9f75a5baf #805: Renamed and fixed Menu to Guide button, in Custom controls
• 6f748d946e12c854c959f9087a902ff165dda7ec #805: Don't hardcode the controller Guide button to open GUI always
• 214a2bbf84e1f6284752d25a00c8c1c3cfe403c2 #822: Use menu button from mapping instead of hardcoded SDL2 "GUIDE" button
• 61d69ef24b4cfb519d455cd9b89e0e8b07c32a2d #827: Improved navigation in HDD panels
• 31bcd1bb3bc4dd887f353275916428a3c5bf1d08 #827: Implemented scrolling with controller/keyboard in master
• 0c56da2db1ecf97364b7ca70aac6c8032c1b6089 #827: Reduced width of Serial Port group
• 3bc4bed795ab53bed10ccb96473804e1ae82681f #827: Get rid of horizontal scrollbar in Misc panel
• 73f207e2d4343e912d17b6b26f48b16838849f4e Fixed #823: Controller in Mouse mode didn't trigger Retroarch Quit combo
• 908d294fdda7e3190c5939d8fc1df3a0ecfbf069 Fixed select button reading would pass wrong Joy ID to function
• 4784f5ea6978a5e41ba9831e78ab050c44fcda81 Don't attempt to read from non-existing joysticks
• 972f8a6bf0ca0a751a82535c3d9b4543aeb283fc Set Input Mouse/Joystick autoswitch to disabled by default
• e26e7c8f4628517c955f556ff5d450b941f0591f Added generic Cortex-A9 32-bit target
• 0f9bb2a8de7ff5a3716c1efd5b2815b22e419c34 Ensure hotkey_pressed is reset after it was triggered to enter the GUI (@mrfixit2001)
• 09cabfff8c309d5fd05c4a7336d0f1b9b3382a21 Added CDTV as a command line option in --model
• a650abbe84ed873b8db047f13df24f8f8e435b77 Change default sound buffer properly
• 6ce18c85e571e744e9cca033df85500c1ee1109c Revert "Changed default audio buffer size to 4KB instead of 16KB"
• 15b79d9d6fa881b43e90fddc90f2c00f6a6667f9 Retroarch: Change button mapping loop to fixed value instead of depending on external variable
• 4bbe68113c8555c9e7b81c89f8f9f6a3b981ce36 Changed default audio buffer size to 4KB instead of 16KB
• 597f445fa815a81db6b755ad9c73065009c46fb9 Updated pipelines from dev
• 4574328199f42afc616ab683cbbee0b80de2684d Updated build pipelines
• e02becc40b7e973f12321cf524b98f7b7358a10a Removed VisualGDB solution from repo
• d8c47a3456983e676ee4a9f570d26d959ee3c718 Retroarch: Fixed crash on startup when parsing controller file
• 1244dba3c3f1c5acf89224205850469acc09cc7a Revert "Retroarch: Fixed crash on startup when parsing controller file"
• d8820a16a16fee6eec498148e1c5d4b8a3231c6b Retroarch: Fixed crash on startup when parsing controller file
• 15217a87162ee522a908d23729dbb2fedec7906e Bumped version to v4.1.5 RC2
• ff70f7a0b824f1ebd2bcb2ac86f1d2b26f2d530d Cherry picked recent updates from dev branch
• 9432242dac32414c8526a303e3f85b05cd99632c DMX: Don't remove blackscreen_element during subshutdown
• da51a28052cb1672bd384d09836189d08741a8d2 #825: back-ported improvements to master branch
• be22dee2c0341e572f4d37709690795caa588432 #827: Navigation cleanup in Floppy panel
• 7af100ee3b30d3483df4e3032bf2fafbce0cd8fa #827: Fixed Sound panel navigation glitches
• 9f46dd746f7f671ba304b31c256e557c7d422ad8 Bumped version to 4.1.5 RC1
• 4dd8496d8ceb071d6688377f170e48b03585be8a #812: Backported fix to master branch
• 10cf29ee12c7736702d78c7414f66984f48ab59b Backport fix for #825 to 4.1.4
• 54dfe34953ec1a24f1f4afd0d3eae4d72de6aead Retain version information in optimized builds also

This list of changes was auto generated.

• 5869e179f621ee3cc8617e2ec313d11d4d0fc06d #841: Increased Savestates to 15
• 4b85d43beccbc863fd67af10b62e6cd99063d98e Bumped version to 4.1.5 RC3
• f558e5cb3ab8be54b82aec25ffcdbc0180bf8ddf Updated Remote deploy/build settings
• 9c1143e27844fc6fad7e566bc01aee79ef455864 Fixed #824: Dispmanx would show black screen if loading another config with different screen dimensions
• 5dfcfcf20f5f645667b64fceddb46c2f73443838 DMX: initialize variable
• 6a54d10cc084ee3a42c9f83b1fe61f4e806736e3 DMX: Remove unused function
• 9725c4004f3acb5e33ee1fe58d680ef9f75a5baf #805: Renamed and fixed Menu to Guide button, in Custom controls
• 6f748d946e12c854c959f9087a902ff165dda7ec #805: Don't hardcode the controller Guide button to open GUI always
• 214a2bbf84e1f6284752d25a00c8c1c3cfe403c2 #822: Use menu button from mapping instead of hardcoded SDL2 "GUIDE" button
• 61d69ef24b4cfb519d455cd9b89e0e8b07c32a2d #827: Improved navigation in HDD panels
• 31bcd1bb3bc4dd887f353275916428a3c5bf1d08 #827: Implemented scrolling with controller/keyboard in master
• 0c56da2db1ecf97364b7ca70aac6c8032c1b6089 #827: Reduced width of Serial Port group
• 3bc4bed795ab53bed10ccb96473804e1ae82681f #827: Get rid of horizontal scrollbar in Misc panel
• 73f207e2d4343e912d17b6b26f48b16838849f4e Fixed #823: Controller in Mouse mode didn't trigger Retroarch Quit combo
• 908d294fdda7e3190c5939d8fc1df3a0ecfbf069 Fixed select button reading would pass wrong Joy ID to function
• 4784f5ea6978a5e41ba9831e78ab050c44fcda81 Don't attempt to read from non-existing joysticks
• 972f8a6bf0ca0a751a82535c3d9b4543aeb283fc Set Input Mouse/Joystick autoswitch to disabled by default
• e26e7c8f4628517c955f556ff5d450b941f0591f Added generic Cortex-A9 32-bit target
• 0f9bb2a8de7ff5a3716c1efd5b2815b22e419c34 Ensure hotkey_pressed is reset after it was triggered to enter the GUI (@mrfixit2001)
• 09cabfff8c309d5fd05c4a7336d0f1b9b3382a21 Added CDTV as a command line option in --model
• a650abbe84ed873b8db047f13df24f8f8e435b77 Change default sound buffer properly
• 6ce18c85e571e744e9cca033df85500c1ee1109c Revert "Changed default audio buffer size to 4KB instead of 16KB"
• 15b79d9d6fa881b43e90fddc90f2c00f6a6667f9 Retroarch: Change button mapping loop to fixed value instead of depending on external variable
• 4bbe68113c8555c9e7b81c89f8f9f6a3b981ce36 Changed default audio buffer size to 4KB instead of 16KB
• 597f445fa815a81db6b755ad9c73065009c46fb9 Updated pipelines from dev
• 4574328199f42afc616ab683cbbee0b80de2684d Updated build pipelines
• e02becc40b7e973f12321cf524b98f7b7358a10a Removed VisualGDB solution from repo
• d8c47a3456983e676ee4a9f570d26d959ee3c718 Retroarch: Fixed crash on startup when parsing controller file
• 1244dba3c3f1c5acf89224205850469acc09cc7a Revert "Retroarch: Fixed crash on startup when parsing controller file"
• d8820a16a16fee6eec498148e1c5d4b8a3231c6b Retroarch: Fixed crash on startup when parsing controller file
• 15217a87162ee522a908d23729dbb2fedec7906e Bumped version to v4.1.5 RC2
• ff70f7a0b824f1ebd2bcb2ac86f1d2b26f2d530d Cherry picked recent updates from dev branch
• 9432242dac32414c8526a303e3f85b05cd99632c DMX: Don't remove blackscreen_element during subshutdown
• da51a28052cb1672bd384d09836189d08741a8d2 #825: back-ported improvements to master branch
• be22dee2c0341e572f4d37709690795caa588432 #827: Navigation cleanup in Floppy panel
• 7af100ee3b30d3483df4e3032bf2fafbce0cd8fa #827: Fixed Sound panel navigation glitches
• 9f46dd746f7f671ba304b31c256e557c7d422ad8 Bumped version to 4.1.5 RC1
• 4dd8496d8ceb071d6688377f170e48b03585be8a #812: Backported fix to master branch
• 10cf29ee12c7736702d78c7414f66984f48ab59b Backport fix for #825 to 4.1.4
• 54dfe34953ec1a24f1f4afd0d3eae4d72de6aead Retain version information in optimized builds also

This list of changes was auto generated.

• be22dee2c0341e572f4d37709690795caa588432 #827: Navigation cleanup in Floppy panel
• 7af100ee3b30d3483df4e3032bf2fafbce0cd8fa #827: Fixed Sound panel navigation glitches
• 9f46dd746f7f671ba304b31c256e557c7d422ad8 Bumped version to 4.1.5 RC1
• 4dd8496d8ceb071d6688377f170e48b03585be8a #812: Backported fix to master branch
• 10cf29ee12c7736702d78c7414f66984f48ab59b Backport fix for #825 to 4.1.4
• 54dfe34953ec1a24f1f4afd0d3eae4d72de6aead Retain version information in optimized builds also

This list of changes was auto generated.