Updated AirConnect packages for Synology NAS and Synology Router
No new version for DSM6
You are new to AirConnect or this is the first time you upgrade from DSM6 to DSM7? Please take a look at the Documentation and Upgrade Guide.
Samsung HW-N950
(#52 ) to default filter
If you encounter problems with this synology version of AirConnect, please consider opening an issue here, so i can fix the problem and others can benefit as well.
If you have any suggestions, ideas or wishes, feel free to open an issue.
Nothing new, still at 0.2.51.2
Check the full CHANGELOG for more information.
Take the package suitable for your architecture and check the readme if something is unclear.
If you encounter problems with AirConnect in general, please open an issue at the official repository.
Full Raw Changelog: https://github.com/eizedev/AirConnect-Synology/compare/0.2.51.2-20220130...0.2.51.2-20220206
No new version for DSM6
You are new to AirConnect or this is the first time you upgrade from DSM6 to DSM7? Please take a look at the Documentation and Upgrade Guide.
Fitzwilliam
(#47) and Devialet Expert Pro 140
(#46) to default filter
airconnect.conf
when trying to modify file over SMB/network share (Thanks @norabor #48)If you encounter problems with this synology version of AirConnect, please consider opening an issue here, so i can fix the problem and others can benefit as well.
If you have any suggestions, ideas or wishes, feel free to open an issue.
Nothing new, still at 0.2.51.2
Check the full CHANGELOG for more information.
Take the package suitable for your architecture and check the readme if something is unclear.
If you encounter problems with AirConnect in general, please open an issue at the official repository.
Full Changelog: https://github.com/eizedev/AirConnect-Synology/compare/0.2.51.2-20211124...0.2.51.2-20220130
Nothing new for DSM 6 here, please use the older release for DSM 5 & 6: 0.2.50.5-20210706
There is nothing special new for AirConnect-Synology
in this release.
But it ships new versions of the AirConnect
binaries. A security vulnerability was fixed in this release tracked in CVE-2017-12087 (Check changelog below).
You are new to AirConnect or this is the first time you upgrade from DSM6 to DSM7? Please take a look at the Documentation and Upgrade Guide.
If you encounter problems with this synology version of AirConnect, please consider opening an issue here, so i can fix the problem and others can benefit as well.
If you have any suggestions, ideas or wishes, feel free to open an issue.
0.2.51.2
- fix HTTP2 upgrade response to "Connection"
- audio/mp3 is not a correct mimetype...
0.2.51.1
- Fix CVE-2017-12087
0.2.51.0
- invoke stop callback on TEARDOWN first
Check the full CHANGELOG for more information.
Take the package suitable for your architecture and check the readme if something is unclear.
If you encounter problems with AirConnect in general, please open an issue at the official repository.
Full Changelog: https://github.com/eizedev/AirConnect-Synology/compare/0.2.50.5-20210826...0.2.51.2-20211124
This is only a testing release for all DSM6 users. This testing release includes the same UI integration as the DSM7 releases.
Due to the fact that i did not own a DSM6 device anymore, feel free to test it and give me feedback in the discussion. Thanks.
Now with integrated installation UI in the synology package center.
You can now select between installing airupnp & aircast or only airupnp/aircast.
Also you will now have a configuration file for AirConnect-Synology located at /volume1/airconnect/airconnect.conf
(/volume? where ? is the number of your volume). With this configuration file you can now dynamically configure the basic options of airupnp/aircast and AirConnect-Synology in general without rebuilding the package.
The default configuration is the same as in the last releases.
For more information please read the following documentation steps, especially about airconnect.conf
:
Since the configuration is a breaking change, please UNINSTALL your existing package first (if not, you will get an error message during startup)
If you encounter problems with this synology version of AirConnect, please consider opening an issue here, so i can fix the problem and others can benefit as well.
If you have any suggestions, ideas or wishes, feel free to open an issue.
still at version 0.2.50.5
Check the full CHANGELOG for more information.
Take the package suitable for your architecture and check the readme if something is unclear.
If you encounter problems with AirConnect in general, please open an issue at the official repository.
Nothing new for DSM 6 here, please use the older release for DSM 5 & 6: 0.2.50.5-20210706
Now with integrated installation UI in the synology package center.
You can now select between installing airupnp & aircast or only airupnp/aircast.
Also you will now have a configuration file for AirConnect-Synology located at /volume1/airconnect/airconnect.conf
(/volume? where ? is the number of your volume). With this configuration file you can now dynamically configure the basic options of airupnp/aircast and AirConnect-Synology in general without rebuilding the package.
The default configuration is the same as in the last releases.
For more information please read the following documentation steps, especially about airconnect.conf
:
Since the configuration is a breaking change, please UNINSTALL your existing package first (if not, you will get an error message during startup)
If you encounter problems with this synology version of AirConnect, please consider opening an issue here, so i can fix the problem and others can benefit as well.
If you have any suggestions, ideas or wishes, feel free to open an issue.
still at version 0.2.50.5
Check the full CHANGELOG for more information.
Take the package suitable for your architecture and check the readme if something is unclear.
If you encounter problems with AirConnect in general, please open an issue at the official repository.
Please UNINSTALL your package first if it is still installed (or marked as repairable) after upgrading to DSM7. (Not needed if running the DSM7 Pre-Release)
Please UNINSTALL your package if the upgrade process is not working as expected on DSM5/DSM6.
Please REPORT problems during upgrade on older DSM5 devices.
Please also take a look at the troubleshooting section.
DSM Firmware Version | Package Naming |
---|---|
DSM 5.0-xxxx AND DSM 6.0-xxxx (f.e. DSM 6.0-7321) | AirConnect-x86-64-${VERSION} (f.e. AirConnect-x86-64-0.2.50.5-20210630.spk) |
DSM 7.0-xxxx (f.e. DSM 7.0-40000) | AirConnect-dsm7-x86-64-${VERSION} (f.e. AirConnect-dsm7-86-64-0.2.50.5-20210630.spk) |
Starting with DSM7, both programs, aircast
and airupnp
will now run under the airconnect user. And the complete package will now fully managed from DSM (Before some parts were managed in the startup scripts).
The following information can also be found in the documentation
The location of the logfile has changed! Please read the below lines or the documentation
log
, so it is no longer necessary for normal use to log in via SSH to view the logfile.
/volume1/airconnect/log/airconnect.log
airupnp
or aircast
you could now copy this files also to the same directory in /volume1/airconnect
, also using FileStation.config.xml
for airupnpconfig-cast.xml
for aircastairupnp
or aircast
just by running airupnp
or aircast
without using the full path
airupnp
and aircast
are now added to the PATH (symlinked using DSM config in /usr/local/bin
)If you encounter problems with this synology version of AirConnect, please consider opening an issue here, so i can fix the problem and others can benefit as well.
If you have any suggestions, ideas or wishes, feel free to open an issue.
0.2.50.5
- mdns fix for blank name field
Check the full CHANGELOG for more information.
Take the package suitable for your architecture and check the readme if something is unclear.
If you encounter problems with AirConnect in general, please open an issue at the official repository.
Please UNINSTALL your package first if it is still installed (or marked as repairable) after upgrading to dsm7.
Both programs, aircast
and airupnp
will now run under the airconnect user. And the complete package will now fully managed from DSM (Before some parts were managed in the startup scripts).
Please give me a short feedback if it works for you and on which NAS you have installed it.
A few more notes on this release:
log
, so it is no longer necessary for normal use to log in via SSH to view the logfile.
/volume1/airconnect/log/airconnect.log
airupnp
or aircast
you could now copy this files also to the same directory in /volume1/airconnect
, also using FileStation.config.xml
for airupnpconfig-cast.xml
for aircastairupnp
or aircast
just by running airupnp
or aircast
without using the full path
airupnp
and aircast
are now added to the PATH (symlinked using DSM config in /usr/local/bin
)2021-06-30: This release is not yet compatible with DSM 7 since the package architecture has changed and the build process needs to be changed. Working on it!
Since
0.2.43.0-20201229
you can now find a complete list of the speakers that will be discovered byairupnp
in the README section List of supported UPnP Speakers
If you have another UPnP based speaker that you want to be supported by this package which is not in this list mentioned above, please open an issue and let me know (Please tell me the product name (model name, model number etc.))
If you encounter problems with this synology version of AirConnect, please consider opening an issue here, so i can fix the problem and others can benefit as well.
If you have any suggestions, ideas or wishes, feel free to open an issue.
0.2.50.5
- mdns fix for blank name field
Check the full CHANGELOG for more information.
Take the package suitable for your architecture and check the readme if something is unclear.
If you encounter problems with AirConnect in general, please open an issue at the official repository.
Since
0.2.43.0-20201229
you can now find a complete list of the speakers that will be discovered byairupnp
in the README section List of supported UPnP Speakers
If you have another UPnP based speaker that you want to be supported by this package which is not in this list mentioned above, please open an issue and let me know (Please tell me the product name (model name, model number etc.))
If you encounter problems with this synology version of AirConnect, please consider opening an issue here, so i can fix the problem and others can benefit as well.
If you have any suggestions, ideas or wishes, feel free to open an issue.
0.2.50.4
- fix sslsym.c macros that were still incorrect
0.2.50.3
- noflush was not effective for aircast
0.2.50.2
- make sslsym compatible with openSSL 1.1.x
0.2.50.1
- noflush properly send silent frames at the right speed
0.2.50.0
- flush was broken since 0.2.27.0
- add --noflush options (and force :f in latencies if set)
- increment stream index at each SetURI/LOAD to make it unique
Check the full CHANGELOG for more information.
Take the package suitable for your architecture and check the readme if something is unclear.
If you encounter problems with AirConnect in general, please open an issue at the official repository.
Since
0.2.43.0-20201229
you can now find a complete list of the speakers that will be discovered byairupnp
in the README section List of supported UPnP Speakers
If you have another UPnP based speaker that you want to be supported by this package which is not in this list mentioned above, please open an issue and let me know (Please tell me the product name (model name, model number etc.))
If you encounter problems with this synology version of AirConnect, please consider opening an issue here, so i can fix the problem and others can benefit as well.
If you have any suggestions, ideas or wishes, feel free to open an issue.
0.2.44.1
- (aircast) reset "Remove" flag when adding
0.2.44.0
- openssl 1.1.x compatibility
Check the full CHANGELOG for more information.
Take the package suitable for your architecture and check the readme if something is unclear.
If you encounter problems with AirConnect in general, please open an issue at the official repository.