Which Key.nvim Save

๐Ÿ’ฅ Create key bindings that stick. WhichKey is a lua plugin for Neovim 0.5 that displays a popup with possible keybindings of the command you started typing.

Project README

๐Ÿ’ฅ Which Key

WhichKey is a lua plugin for Neovim 0.5 that displays a popup with possible key bindings of the command you started typing. Heavily inspired by the original emacs-which-key and vim-which-key.

image

โœจ Features

  • for Neovim 0.7 and higher, it uses the desc attributes of your mappings as the default label
  • for Neovim 0.7 and higher, new mappings will be created with a desc attribute
  • opens a popup with suggestions to complete a key binding
  • works with any setting for timeoutlen, including instantly (timeoutlen=0)
  • works correctly with built-in key bindings
  • works correctly with buffer-local mappings
  • extensible plugin architecture
  • built-in plugins:
    • marks: shows your marks when you hit one of the jump keys.
    • registers: shows the contents of your registers
    • presets: built-in key binding help for motions, text-objects, operators, windows, nav, z and g
    • spelling: spelling suggestions inside the which-key popup

โšก๏ธ Requirements

  • Neovim >= 0.5.0

๐Ÿ“ฆ Installation

Install the plugin with your preferred package manager:

lazy.nvim

{
  "folke/which-key.nvim",
  event = "VeryLazy",
  init = function()
    vim.o.timeout = true
    vim.o.timeoutlen = 300
  end,
  opts = {
    -- your configuration comes here
    -- or leave it empty to use the default settings
    -- refer to the configuration section below
  }
}

packer

-- Lua
use {
  "folke/which-key.nvim",
  config = function()
    vim.o.timeout = true
    vim.o.timeoutlen = 300
    require("which-key").setup {
      -- your configuration comes here
      -- or leave it empty to use the default settings
      -- refer to the configuration section below
    }
  end
}

โš™๏ธ Configuration

โ—๏ธ IMPORTANT: the timeout when WhichKey opens is controlled by the vim setting timeoutlen. Please refer to the documentation to properly set it up. Setting it to 0, will effectively always show WhichKey immediately, but a setting of 500 (500ms) is probably more appropriate.

โ—๏ธ don't create any keymappings yourself to trigger WhichKey. Unlike with vim-which-key, we do this fully automatically. Please remove any left-over triggers you might have from using vim-which-key.

๐Ÿš‘ You can run :checkhealth which-key to see if there's any conflicting keymaps that will prevent triggering WhichKey

WhichKey comes with the following defaults:

{
  plugins = {
    marks = true, -- shows a list of your marks on ' and `
    registers = true, -- shows your registers on " in NORMAL or <C-r> in INSERT mode
    -- the presets plugin, adds help for a bunch of default keybindings in Neovim
    -- No actual key bindings are created
    spelling = {
      enabled = true, -- enabling this will show WhichKey when pressing z= to select spelling suggestions
      suggestions = 20, -- how many suggestions should be shown in the list?
    },
    presets = {
      operators = true, -- adds help for operators like d, y, ...
      motions = true, -- adds help for motions
      text_objects = true, -- help for text objects triggered after entering an operator
      windows = true, -- default bindings on <c-w>
      nav = true, -- misc bindings to work with windows
      z = true, -- bindings for folds, spelling and others prefixed with z
      g = true, -- bindings for prefixed with g
    },
  },
  -- add operators that will trigger motion and text object completion
  -- to enable all native operators, set the preset / operators plugin above
  operators = { gc = "Comments" },
  key_labels = {
    -- override the label used to display some keys. It doesn't effect WK in any other way.
    -- For example:
    -- ["<space>"] = "SPC",
    -- ["<cr>"] = "RET",
    -- ["<tab>"] = "TAB",
  },
  motions = {
    count = true,
  },
  icons = {
    breadcrumb = "ยป", -- symbol used in the command line area that shows your active key combo
    separator = "โžœ", -- symbol used between a key and it's label
    group = "+", -- symbol prepended to a group
  },
  popup_mappings = {
    scroll_down = "<c-d>", -- binding to scroll down inside the popup
    scroll_up = "<c-u>", -- binding to scroll up inside the popup
  },
  window = {
    border = "none", -- none, single, double, shadow
    position = "bottom", -- bottom, top
    margin = { 1, 0, 1, 0 }, -- extra window margin [top, right, bottom, left]. When between 0 and 1, will be treated as a percentage of the screen size.
    padding = { 1, 2, 1, 2 }, -- extra window padding [top, right, bottom, left]
    winblend = 0, -- value between 0-100 0 for fully opaque and 100 for fully transparent
    zindex = 1000, -- positive value to position WhichKey above other floating windows.
  },
  layout = {
    height = { min = 4, max = 25 }, -- min and max height of the columns
    width = { min = 20, max = 50 }, -- min and max width of the columns
    spacing = 3, -- spacing between columns
    align = "left", -- align columns left, center or right
  },
  ignore_missing = false, -- enable this to hide mappings for which you didn't specify a label
  hidden = { "<silent>", "<cmd>", "<Cmd>", "<CR>", "^:", "^ ", "^call ", "^lua " }, -- hide mapping boilerplate
  show_help = true, -- show a help message in the command line for using WhichKey
  show_keys = true, -- show the currently pressed key and its label as a message in the command line
  triggers = "auto", -- automatically setup triggers
  -- triggers = {"<leader>"} -- or specifiy a list manually
  -- list of triggers, where WhichKey should not wait for timeoutlen and show immediately
  triggers_nowait = {
    -- marks
    "`",
    "'",
    "g`",
    "g'",
    -- registers
    '"',
    "<c-r>",
    -- spelling
    "z=",
  },
  triggers_blacklist = {
    -- list of mode / prefixes that should never be hooked by WhichKey
    -- this is mostly relevant for keymaps that start with a native binding
    i = { "j", "k" },
    v = { "j", "k" },
  },
  -- disable the WhichKey popup for certain buf types and file types.
  -- Disabled by default for Telescope
  disable = {
    buftypes = {},
    filetypes = {},
  },
}

๐Ÿช„ Setup

With the default settings, WhichKey will work out of the box for most builtin keybindings, but the real power comes from documenting and organizing your own keybindings.

To document and/or setup your own mappings, you need to call the register method

local wk = require("which-key")
wk.register(mappings, opts)

Default options for opts

{
  mode = "n", -- NORMAL mode
  -- prefix: use "<leader>f" for example for mapping everything related to finding files
  -- the prefix is prepended to every mapping part of `mappings`
  prefix = "",
  buffer = nil, -- Global mappings. Specify a buffer number for buffer local mappings
  silent = true, -- use `silent` when creating keymaps
  noremap = true, -- use `noremap` when creating keymaps
  nowait = false, -- use `nowait` when creating keymaps
  expr = false, -- use `expr` when creating keymaps
}

โ• When you specify a command in your mapping that starts with <Plug>, then we automatically set noremap=false, since you always want recursive keybindings in this case

โŒจ๏ธ Mappings

โŒจ for Neovim 0.7 and higher, which key will use the desc attribute of existing mappings as the default label

Group names use the special name key in the tables. There's multiple ways to define the mappings. wk.register can be called multiple times from anywhere in your config files.

local wk = require("which-key")
-- As an example, we will create the following mappings:
--  * <leader>ff find files
--  * <leader>fr show recent files
--  * <leader>fb Foobar
-- we'll document:
--  * <leader>fn new file
--  * <leader>fe edit file
-- and hide <leader>1

wk.register({
  f = {
    name = "file", -- optional group name
    f = { "<cmd>Telescope find_files<cr>", "Find File" }, -- create a binding with label
    r = { "<cmd>Telescope oldfiles<cr>", "Open Recent File", noremap=false, buffer = 123 }, -- additional options for creating the keymap
    n = { "New File" }, -- just a label. don't create any mapping
    e = "Edit File", -- same as above
    ["1"] = "which_key_ignore",  -- special label to hide it in the popup
    b = { function() print("bar") end, "Foobar" } -- you can also pass functions!
  },
}, { prefix = "<leader>" })
Click to see more examples
-- all of the mappings below are equivalent

-- method 2
wk.register({
  ["<leader>"] = {
    f = {
      name = "+file",
      f = { "<cmd>Telescope find_files<cr>", "Find File" },
      r = { "<cmd>Telescope oldfiles<cr>", "Open Recent File" },
      n = { "<cmd>enew<cr>", "New File" },
    },
  },
})

-- method 3
wk.register({
  ["<leader>f"] = {
    name = "+file",
    f = { "<cmd>Telescope find_files<cr>", "Find File" },
    r = { "<cmd>Telescope oldfiles<cr>", "Open Recent File" },
    n = { "<cmd>enew<cr>", "New File" },
  },
})

-- method 4
wk.register({
  ["<leader>f"] = { name = "+file" },
  ["<leader>ff"] = { "<cmd>Telescope find_files<cr>", "Find File" },
  ["<leader>fr"] = { "<cmd>Telescope oldfiles<cr>", "Open Recent File" },
  ["<leader>fn"] = { "<cmd>enew<cr>", "New File" },
})

Tips: The default label is keymap.desc or keymap.rhs or "", :h nvim_set_keymap() to get more details about desc and rhs.

๐Ÿš™ Operators, Motions and Text Objects

WhichKey provides help to work with operators, motions and text objects.

[count]operator[count][text-object]

  • operators can be configured with the operators option
    • set plugins.presets.operators to true to automatically configure vim built-in operators
    • set this to false, to only include the list you configured in the operators option.
    • see here for the full list part of the preset
  • text objects are automatically retrieved from operator pending key maps (omap)
    • set plugins.presets.text_objects to true to configure built-in text objects
    • see here
  • motions are part of the preset plugins.presets.motions setting
How to disable some operators? (like v)
-- make sure to run this code before calling setup()
-- refer to the full lists at https://github.com/folke/which-key.nvim/blob/main/lua/which-key/plugins/presets/init.lua
local presets = require("which-key.plugins.presets")
presets.operators["v"] = nil

๐Ÿš€ Usage

When the WhichKey popup is open, you can use the following key bindings (they are also displayed at the bottom of the screen):

  • hit one of the keys to open a group or execute a key binding
  • <esc> to cancel and close the popup
  • <bs> go up one level
  • <c-d> scroll down
  • <c-u> scroll up

Apart from the automatic opening, you can also manually open WhichKey for a certain prefix:

โ—๏ธ don't create any keymappings yourself to trigger WhichKey. Unlike with vim-which-key, we do this fully automatically. Please remove any left-over triggers you might have from using vim-which-key.

:WhichKey " show all mappings
:WhichKey <leader> " show all <leader> mappings
:WhichKey <leader> v " show all <leader> mappings for VISUAL mode
:WhichKey '' v " show ALL mappings for VISUAL mode

๐Ÿ”ฅ Plugins

Four built-in plugins are included with WhichKey.

Marks

Shows a list of your buffer local and global marks when you hit ` or '

image

Registers

Shows a list of your buffer local and global registers when you hit " in NORMAL mode, or <c-r> in INSERT mode.

image

Presets

Built-in key binding help for motions, text-objects, operators, windows, nav, z and g

image

Spelling

When enabled, this plugin hooks into z= and replaces the full-screen spelling suggestions window by a list of suggestions within WhichKey.

image

๐ŸŽจ Colors

The table below shows all the highlight groups defined for WhichKey with their default link.

Highlight Group Defaults to Description
WhichKey Function the key
WhichKeyGroup Keyword a group
WhichKeySeparator DiffAdd the separator between the key and its label
WhichKeyDesc Identifier the label of the key
WhichKeyFloat NormalFloat Normal in the popup window
WhichKeyBorder FloatBorder Normal in the popup window
WhichKeyValue Comment used by plugins that provide values
Open Source Agenda is not affiliated with "Which Key.nvim" Project. README Source: folke/which-key.nvim
Stars
4,300
Open Issues
185
Last Commit
1 week ago
License

Open Source Agenda Badge

Open Source Agenda Rating